Chemical Process Pumps Dealers

(192 products available)
  • Magnetic Drive Chemical Process Pumps

    Magnetic Drive Chemical Process Pumps

    Get Price Quote

    • Country of OriginIndia
    • Flow Rate10 LPM To 1000 LPM (customizable)
    • Total Carbohydrate12 Months Standard
    • Number Of FlowerCentrifugal Magnetic Drive Pump
    • MaterialPolypropylene (PP), PVDF, PTFE, Stainless Steel (SS316)
    • Head RangeUp To 60 Meters
    • Operating PressureUp To 10 Bar
    • Temperature Range-20°C To +120°C (depending On Material)
    • Motor Power0.5 HP To 15 HP
    • Speed1450 / 2900 RPM
    • CertificationsISO
    • Product Name: Magnetic Drive Chemical Process Pumps Pump Type: Seal-less Centrifugal Magnetic Drive Pump Material: Polypropylene (PP), PVDF, PTFE, Stainless Steel (SS316) – based on media Flow Rate: 10 LPM to 1000 LPM (customizable) Head Range: Up to 60 meters Operating Pressure: Up to 10 bar Temperature Range: -20°C to +120°C (depending on material) Motor Power: 0.5 HP to 15 HP Speed: 1450 / 2900 RPM Connection Type: Threaded / Flanged (BSP/NPT/ANSI) Design Feature: Leak-proof, no mechanical seal, corrosion-resistant internal components Mounting: Horizontal Base Mounted Applications: Acids, Alkalis, Solvents, Corrosive Chemicals in Chemical Plants, Electroplating, Pharma, Water Treatment Power Supply: 3-Phase, 415V, 50Hz Warranty: 12 months standard Certifications: ISO
    ...more
    www
  • Centrifugal Water Chemical Process Pumps

    Centrifugal Water Chemical Process Pumps

    Get Price Quote

    • Number Of FlowerChemical Process Pump
    • Country of OriginIndia
    • HeadUp to 180 Mtrs
    • TemperatureUp to 350 ºC
    • CapacityUp to 900 M3 / HR
    • M.O.CGraded Cast Iron, NICI, CF8, CF8M, SS316L, CD4MCUN, Etc.
    • WORKING PRINCIPLE:A centrifugal pump's working principle is based on the concept of converting mechanical energy into hydraulic energy. It applies centrifugal force on a fluid through rotation to generate the desired pressure and flow. It imparts velocity to a liquid, which is subsequently converted into a continuous flow. FEATURES: End Suction Back Pull Out Design with Close, Semi Open and Open Impeller. Steady Flow, High Efficiency and Sturdy Construction. Low NPSH, Low Noise and Maintenance Free. Environmental Friendly & Shaft Deflection Below 0.05 mm. Pumps offered with Gland Packing and Mechanical Seals. Casing Cover Cooling or Heating Jacket is Possible. Impellers are balanced Dynamically. Simple External Axial Adjustment for Impeller Wear and Tear in some Designs. Design in accordance with 24255 / EN 733, 24256 / ISO 2558, ANSI B 73.1. Deep Groove Ball Bearings / Double Row Angular Contact Ball Bearings / Cylindrical Roller Bearings are provided as per the Requirement & Design. Well point Dewatering Pumps with Engine Drive and Trailer are also offered for Remote Areas. APPLICATIONS: Handling Clean or Turbid water, Condensate Water, Fire Fighting, Air Conditioning, Irrigation, Sprinkler System, Cooling Towers, Booster Services, Sea Water, Mines, Chemicals and Petrochemicals, Dyes and Intermediates, Acids, Hydrocarbons, Distilleries, Liquors, Thermic Fluid, Hot Oils, Brine, Alkaline Solutions, Solvents, Corrosive Liquids and Slurries, Pulp & Paper Stock, Etc.
    ...more
    www
  • Polypropylene Chemical Process Pump

    Polypropylene Chemical Process Pump

    12,900 / Piece

    • Country of OriginIndia
    • Power SourceElectric
    • Country of Origin380 V-415 V
    • Max Flow Rate1000 LPM
    • Usage/ApplicationChemical Process
    • MaterialPolypropylene (PP)
    • Phase3
    • Motor Power0.75-45 kW
    • Speed2900 rpm
    • Product Description We are offering Polypropylene Chemical Process Pump to our clients., PP Chemical Pump, Acid Pump, PP Bare Pump
    ...more
    www
  • Polypropylene Chemical Process Pump

    Polypropylene Chemical Process Pump

    10,000 - 12,000 / Piece

    • Automatic GradeSemi Automatic
    • ApplicationChemical Supply
    • Availability150-200kg
    • Total Carbohydrate1year
    • Country of OriginIndia
    • Power SourceElectric
    • Max Flow Rate1000 LPM
    • MaterialPolypropylene
    • PhaseThree Phase
    • Motor Power0.75-45 kW
    ...more
    www
  • Polypropylene Chemical Process Pump

    Polypropylene Chemical Process Pump

    9,000 / Piece

    • ConditionNew
    • Number Of FlowerChemical Process Pump
    • Country of OriginIndia
    • Maximum Head PressureUp to 70 Mtr
    • Maximum Flow RateUp to 70 M3/hr
    • Design Pressure8 Bar
    • Maximum Temperature CapacityUp to 120 C
    • SpeedUp to 2880 Rpm
    • Impeller DesignNon Clog Semi Open
    • MaterialPolypropylene, U.H.M.W.E
    • RangeDPP
    • Applications Polypropylene Chemical Process Pump our DPP, DPM & DPV Range is widely used in Effluent plant, Transfer and loading/unloading HCL, Sulphuric acid, Caustic liquid, Water treatment, Corrosive Gasses NH3, Co2, So2 , Alkali, Treatment plant, electro plating & steel rolling mills, ideal for Circulation of chemical in metal finishing industries.   Features Corrosion Resistant Polypropylene Pumps ensure continuous work for hours and hours Comes with a dynamic and hydraulically balanced impeller with aerodynamic profile vanes Have a solid molded casing and impeller long life and a minimum of wear Top centerline discharge and Integrated flanges, Single piece, joint less casing formed out of Injection molded polypropylene / pVDF / UHMWpE. Can suit extremely corrosive duties in the process and Chemical Industries without creating any hassle in the process and productivity.  Simple in Construction due to les number of parts. Mainly used for treating effluent
    ...more
    www
  • PP Chemical Process Pumps

    PP Chemical Process Pumps

    35,000 / Piece

    • Number Of FlowerChemical Process Pump
    • ApplicationChemical Supply
    • Availability100-150kg, 150-200kg, 200-250kg, 250-300kg, 50-100kg
    • Country of Origin110V, 220V, 380V, 440V
    • ConditionNew
    • Automatic GradeManual, Semi Automatic
    • Power1-3kw, 3-6kw, 6-9kw, 9-12kw
    • Total Carbohydrate1year
    • Pump Power10Hp, 2Hp, 3Hp, 5Hp, 7Hp
    • Pump RPM1400, 2800
    • Brand NameM/S MICROTECH ENGINEERING
    • ApplicationDairy industries,Food processing plant,Pharmaceutical industries,Sugar & confectionery
    • FuelDIESEL
    • TheoryPOSITIVE DISPLACEMENT PUMP
    • Pressure1-3 KW 3-6 KW
    • StructureSS
    • NameSS CHEMICAL PUMPS
    • Item CodePCP
    • Pay Mode TermsL/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
    • Production Capacity150
    • Delivery Time1 Month
    • Packaging DetailsWooden Charge
    • We have invested a large amount for developing all-the-in-house storage facility that is managed and maintained by our diligent professionals. Also, it keeps us free from stock-out situations. Having captured all markets of Delhi(India), our company has emerged as an acknowledged provider of this product range.Standard features : Centrifugal single stage Flange as per din standard back pull out design Open / close impeller Shaft sealing by single / doable mechanical seals grease lubricated, deep grove ball bearing The pump handle liquid having viscosities up to 1500 centrioles also with flame proof motor Optional features : Shaft sealing by gland packing Bearing lubricating by oil ANSI drilling on DIN flanges Trolley mounting arrangement Various type of connection Head - 49-meter Capacity - 113-m3/h Delivery-size - 12to100-mm Temperature - (-10 to 95 degree Celsius test pressure - 7 kg/cm2) Material : Casing - PP, GFPP, PVDF Shaft - st. steel ( SS 410 / SS 316 / SS 304 ) Impeller - PP, GFPP, PVDF Reliability : The pump are hydraulically designed for maximum efficiency. Every pump passes through stringent process & quality control plans and is designed to give longer life with consistent performance and trouble free service.Application Dairy industries Food processing plant Pharmaceutical industries Sugar & confectionery Chemical processing industries Bottling plants Distillery Beverages Alkaline solution Water treatment plants Colors dies & pigments / paints Descaling application Paper & Sagar industries Textile industries Detergent, soaps, shampoo Natural cellulose fiber / synthetic fiber system Hot & cold water pumping Effluent treatment plant Steel industries Scrubbing system Fertilizer plants Cement plants Due to content research & development data is subject to change
    ...more
    www
  • Chemical Process Pump

    Chemical Process Pump

    50,000 - 95,000 / Piece

    • MOQ10 Piece
    • Pump RPM2800
    • Country of OriginIndia
    • Total Carbohydrate2years
    • StructureSS
    • Availability100-150kg
    • Number Of FlowerChemical Process Pump
    • Country of Origin440V
    • Pressure10
    • Power9-12kw
    • Automatic GradeManual
    • ConditionNew
    • Brand NameSUPERFLOW PUMPS,SUPERFLOW
    • Temperature150
    • Head100
    • Pump Power2Hp
    • ApplicationCHEMICAL TRANSFER
    • BEARINGSKF
    • CASTINGINVESTMENT
    •           Amazing Quality The operation quality and reliability of a Pump depends upon Quality of its design, basic raw-materials and manufacturing quality.  To achieve this goal, we have a controlled manufacturing system with International Quality Assurance Plan from Testing of Raw-materials to Pump Testing on Test Bed to meet customers' specification and guaranteed level of performance.  We provide entire satisfaction to our clients in terms of product quality and delivery period which builds a long relationship in for future business.  
    ...more
    www
  • Leakless Chemical Process Pumps

    Leakless Chemical Process Pumps

    45,000 - 80,000 / 50KG

    • Pump RPM2800, 3500
    • Country of OriginIndia
    • Total Carbohydrate1year
    • Availability50-100kg
    • Number Of FlowerChemical Process Pump
    • Country of Origin440V
    • ApplicationINDUSTRIAL,FERTILIZER * EFFLUENT * ELECTRO PLATING * SCRUBBER UNIT * WATER TREATMENT * SOLVENTS
    • Pump Power75hp
    • Power9-12kw
    • Automatic GradeSemi Automatic
    • ConditionNew
    • Brand NameLEAKLESS PUMPS
    • TemperatureUPTO 90 C
    • HeadUPTO 80 MTR
    • Size12mm TO 200mm
    • application * highly corrosive acid transfer * fertilizer * effluent * electro plating * scrubber unit * water treatment * solvents * air conditioning * dyes and pigments * pharmaceuticals * power plant * pickling plant * sprinkle system * food processing
    ...more
    www
  • Polypropylene Chemical Process Pump

    Polypropylene Chemical Process Pump

    Get Price Quote

    • Temperature80° C - 120° C
    • Capacity Q upto50 M3/Hr.
    • TDH H - Up To40 Mtr.
    • Pump Sizes - DN25 mm To 80 mm
    • Speed - N1440/2880 rpm
    • MOCPP/PVDF/UHMWP
    • SeriesHMEW-PP
    • Application  Transferring of Concentrated HCL From Road Tankers Filter Press for Dyes & Chemical  Effluent Treatment  Water Treatment Plants Pickling in Steel Rolling Mills  Scrubbing of Corrosive Gases Like Ci , Br , F , So , So , Co ,NH  Electro-Plating  Descaling
    ...more
    www
  • ANSI Chemical Process Pumps

    ANSI Chemical Process Pumps

    Get Price Quote

    We offer ansi chemical process pumps. Rotech pumps, the largest industrial pumps manufacturer in canada and world, offers 1196 series ansi chemical process pumps designed to handle corrosive fluid handling applications.
  • Chemical Process Pump

    Chemical Process Pump

    Get Price Quote

    Range : Capacity         Up to 350 m3/h Head               Up to 160 m Pressure          Up to 16 bars Temperature    Up to 2000/C Speed              Up to 3600 rpm Material          Cl, NCl, Cast Steel, Stainless                         Steel, Nobler Alloy Applications: Transfer of corrosive liquids in chemicals, pharmaceuticals, sugar, paper, dyes, textiles, environmental engineering.   Handling of hydrocarbons, organic and inorganic chemicals condensate DM water.  
    ...more
  • Chemical Process Pump

    Chemical Process Pump

    Get Price Quote

    • Number Of FlowerPump
    • ApplicationChemical Supply
    • Availability100-150kg
    • Country of Origin220V
    • Automatic GradeSemi Automatic
    • Power1-3kw, 3-6kw, 6-9kw
    • Total Carbohydrate1year
    • Pump Power10Hp, 2Hp, 3Hp, 5Hp, 7Hp
    • Product Features Casing Bonus casing thickness: Class 150 pumps feature Class 300 wall thickness as standard; increased reliability and maximized casing life. Top centerline discharge for air handling, self-venting. Back pull-out design for ease of maintenance. Integral casing feet prevent pipe load misalignment—maximized seal and bearing life. Serrated flanges standard for positive sealing against leakage. Meets ANSI B16.5 requirements.Class 150 FF flanges standard, optional Class 150 RF, 300 FF/RF. Fully Open Impeller Acknowledged best design for CPI services—solids handling, stringy material, corrosives, abrasives. Two times the wear area of closed type impellers for longer life. Back pump-out vanes reduce radial thrust loads and seal chamber pressure. Sealing Flexibility Wide range of sealing arrangements available to meet service conditions. Engineered seal chambers improve lubrication and heat removal (cooling) of seal faces for extended seal life and pump uptime. Positive Sealing Fully confined gasket at casing joint protects alignment fit from liquid, makes disassembly easier. Ductile Iron Frame Adapter Material strength equal to carbon steel for safety and reliability. Continuous Performance Original flow, pressure and efficiency are maintained by simple external adjustment resulting in long-term energy and repair parts savings. Heavy Duty Shaft And Bearings Rigid shaft designed for minimum deflection at seal faces—less than 0.002 in. (.05 mm). Bearings sized for 10-year average life under tough operating conditions. Available with or without shaft sleeve. Extra Large Oil Sump Capacity Increased oil capacity provides better heat transfer for reduced oil temperature. Bearings run cooler and last longer. Rigid Frame (and Casing) Feet
    ...more
  • Chemical Process Pumps

    Chemical Process Pumps

    Get Price Quote

    Leveraging on our expertise, we manufacture and fabricate quality Chemical Process Pumps. Our range of pumps find a wide application in chemicals, petrochemicals, fertilizers, oil refineries, paper mills, sugar mills, dairy, pesticides, pharmaceutical industries and steel plants. Apart from manufacturing, we also provide fabrication services to our clients. Depending on the nature of the liquid to be handled, we accordingly seal and pack the product. Our range of chemical pumps are widely known for high performance and reliability.     Chemical Process Pumps ( Series FCP-R )  We hold expertise in providing a wide assortment of Chemical Process Pumps, which is manufactured using high-grade C.I., C.S., S.S. 304, SS 316, SS316L, Alloy 20, Hast-alloy monel and Ni-hard. It is considered ideal to be used for all chemicals, acids, alkalies, corrosive slurries, solvents and hydrocarbons. Our range of Chemical Process Pumps meets the application requirements of numerous industries and possesses the following specifications:     Capacity : Up to 800 m3/hr. Head : Up to 230 mtrs. Temperature : Up to 2600C Working Pressure : Up to 26kg/cm2 Speed : Up to 3000 rpm Shaft Sealing : Gland / mech. seal   Enlisted below are the quality attributes of our range: Designed as per ANSI D73.1 1974 Horizontal centrifugal back pull out type Single stage, end suction, top centerline discharge Covers a large range of 32 sizes with interchangeable mounting dimensions Easy to facilitate installation, maintenance and maximum dimensional interchangeability Minimize spares inventory Designed as sturdy, reliable and trouble free equipment for handling even hard to handle corrosive liquids and slurries Bearing housing cooling jacket, a integral part of design Reliable various mechanical seal options, mountings and flushing plants for clear liquids or even slurries Give zero leakage and prolong life of seals
    ...more
  • KCP Chemical Process Pump

    KCP Chemical Process Pump

    Get Price Quote

    Operating Data   ● Capacity Upto 900 M3/Hr ● Head Upto 140 Mtrs ● Temperature Upto 200°C ● Casing Pressure Upto 22 Bar ● Pump Size(Delivery Bore) 32 mm to 200 mm   Features ● Conforming to Din 24256 / ISO 2858● Back pull out Design● Engineered to APP 610 ● 6th Edition● Only 4 bearing beds to cover 33 models● Closed Impeller● Gland Packed / mechanical seal   Applications ● Process, Petro Chemicals, Fertilizers, Paper & Sugar Industries● Handling Corrosive acids, Alkalis● Hydro carbons, oils, thermic fluids● Clarified water, Back water, White water,● Drinking water, soft water, Centricleaner etc., in Pulp & Paper mills
    ...more
  • PolyChem Chemical Process Pump

    PolyChem Chemical Process Pump

    Get Price Quote

    • Number Of FlowerAutomatic
    • Availability50-100kg
    • Country of Origin220V
    • Power1-3kw
    • Total Carbohydrate1 Year
    • Pump Power5Hp
    ...more
  • Chemical Process Pump

    Chemical Process Pump

    24,000 - 25,000 / Piece

    • Number Of FlowerChemical Process Pump
    • ApplicationChemical Supply
    • Availability100-150kg, 150-200kg, 200-250kg, 250-300kg, 50-100kg
    • Country of Origin110V, 220V, 380V, 440V
    • ConditionNew, Used
    • Automatic GradeManual, Semi Automatic
    • Power1-3kw, 3-6kw, 6-9kw, 9-12kw
    • Total Carbohydrate1year, 2years
    • Pump Power10Hp, 2Hp, 3Hp, 5Hp, 7Hp
    • Pump RPM1400, 2800
    ...more
  • Chemical Process Pump

    Chemical Process Pump

    Get Price Quote

    We are engaged in manufacturing all kind of Chemical Process Pumps for Acids, Alkalis, Dyes, Seawater and Corrosive Slurries, Hydro Carbons etc. These types of pumps are used for pumping Acids, Dyes, and Hydrocarbons. These Chemical Process Pumps are suitable for hot water recirculation pumping lines in closed loop tank systems. The Jacketed type pumps with heating elements are perfect for handling liquids which turns too viscous or forms crystals at lower temperatures. This type of ANSI Series is known as an extra heavy duty centrifugal pump for Horizontal, End Suction, and Single Stage. Top centre line discharge with fully open impeller to suit any corrosive liquid and slurry application with back pull out design. This series includes design features to facilitate installation. Maintenance and also maximum dimensional inter changeability. This range covers from 1750 rpm to 3500 rpm with interchangeable mounting dimension, size, location of suction and discharge nozzles, impeller, shaft, base plate and foundation bolt holes etc. They are basically designed as reliable equipment for handling corrosive liquids with or without solid particles.
    ...more
  • Chemical Process Pumps

    Chemical Process Pumps

    Get Price Quote

    • Number Of FlowerChemical Process Pump
    • MaterialMetal
    • Packaging TypeStandard Packaging
    • Purity100% Leak Proof Pumps,No Shaft Seal Maintenance Required
    • Power0.12 H.P. To 5 H.P.
    • ApplicationHandling Corrosive Chemicals, Plating Chemicals, Toxic & Fuming Liquids
    • Temperature ResistancePolypropylene Glass Field - 80 Deg C, PVDF - 120 Deg C
    • Capacity10 LPM To 750 LPM
    • HeadUp To 40 Mtrs
    • Speed2900 RPM
    • PhaseSingle Phase / Three Phase
    • Only quality packing material has been used for the packing of the products. Customers can stay rest assured for the safe delivery of the orders as our experts keep a vigil eye on the entire procedure. Raw materials are the essential bottleneck assets that are highly important for the production of the finished goods. Thus, we stringently check the inputs before procurement. Features : 100% Leak Proof Pumps No Shaft Seal to maintain, replace High Efficiency due to permanent magnet power coupling Simple design, easy to operate & maintain Very useful for handling highly corrosive chemicals, plating chemicals, toxic & fuming liquids Pump Material & Temperature Resistance : Polypropylene Glass Field - 80 deg C PVDF (Polyvinylidene Fluoride) - 120 deg C Pump Range & Capacity : Capacity upto - 10 LPM To 750 LPM. Head upto - 40 Mtrs . Power upto - 0.12 H.P. To 5 H.P. Speed (RPM) - 2900 RPM Phase - Single Phase / Three Phase
    ...more
  • Chemical Process Pump

    Chemical Process Pump

    Get Price Quote

    • TemperatureUp To 200 Deg.C
    • PressureUp To 16 Bar
    • HeadUp To 150 Mtrs
    • Country of OriginIndia
    • Power SourceElectric
    • Max CapacityUp To 400M3/hr. Max
    • ImpellerClose / Semi Open/ OPEN
    • Chemical process pumps are utilized in the petrochemical, oil & gas, chemical & pharma industries & food processing industries.
    www
  • Chemical Process Pumps

    Chemical Process Pumps

    Get Price Quote

    • Capacity up to750  M3/Hr
    • Head up to140 MLC
    • Work. Pressure40 Bars
    • Work. Temperature250 Degree C
    • Shaft SealingMechanical Seals / Gland Packing
    • Martial of constructionsSS316, SS304, AL-20, Hastalloy-B/C, 100% Nickle, Carbon Steel, Cast Iron
    ...more
  • Chemical Process Pumps

    Chemical Process Pumps

    Get Price Quote

    Design: Horizontal, radial split, volute casing pumps according to ANSI B73-1 specifications with open impeller, end suction, top centre line discharge. Simple external axial adjustment for impeller wear. Back pull out design enables to remove the rotor without disturbing the pipelines. If a spacer coupling is used, the motor does not have to be removed from the base plate. Only four bearing beds cover the entire 32 models. This means that the shafts, sleeves, bearings, and bearing beds are identical in and interchangeable for a large number of pump sizes
    ...more
  • Chemical Process Pumps

    Chemical Process Pumps

    Get Price Quote

    We are a notable Manufacturer, Exporter, and Supplier of Chemical Process Pumps. The Chemical Process Pumps have end suction, horizontal back pull out designed Pump, which are in accordance with prevailing standards. The Chemical Process Pumps come with a soft gland packing arrangement with provision for flushing and sealing liquid connection. Applications AcidsPhosphateCausticAmmoniaDyesSolventsAlcoholOilsAromatics Design The Chemical Process Pump Type " ACR " "ACR-Aâ is an end Suction, Horizontal back pull out Designed Pump with Accordance to DIN-24256 / ISO-2858 Seal Arrangement Soft gland packing arrangement with provision for flushing and sealing liquid connection. Also available with jacketed st. box for high temp. Mechanical seal - Internal / external arrangement with provision for API sealing plans.
    ...more
  • Chemical Process Pump

    Chemical Process Pump

    Get Price Quote

    • Number Of FlowerChemical Process Pump
    • ApplicationChemical Supply
    • Availability100-150kg, 150-200kg, 200-250kg, 250-300kg, 50-100kg
    • Country of Origin110V, 220V, 380V, 440V
    • ConditionNew, Used
    • Automatic GradeManual, Semi Automatic
    • Power1-3kw, 3-6kw, 6-9kw, 9-12kw
    • Total Carbohydrate1year, 2years
    • Pump Power10Hp, 2Hp, 3Hp, 5Hp, 7Hp
    • Pump RPM1400, 2800
    • FlowUp to 550 M3/Hr
    • Speedup to 3600 RPM
    ...more
  • Chemical Process Pump

    Chemical Process Pump

    Get Price Quote

    • Temperature200° C
    • Size25 to 200 mm
    • Capacity700m³ /hr
    • The offered chemical process pumps are designed to handle all kinds of liquids such as alkalis, acids, starch, filtrate etc. The impeller construction and external adjustment makes it easy to use.
    ...more
  • Chemical Process Pump

    Chemical Process Pump

    4,000 - 5,000 / Piece

    • Number Of FlowerChemical Process Pump
    • ApplicationChemical Supply
    • Availability100-150kg, 200-250kg, 50-100kg
    • Country of Origin110V, 220V, 380V, 440V
    • ConditionNew, Used
    • Automatic GradeManual, Semi Automatic
    • Power1-3kw, 3-6kw, 6-9kw, 9-12kw
    • Total Carbohydrate1year, 2years
    • Pump Power10Hp, 2Hp, 3Hp, 5Hp, 7Hp
    • Pump RPM1400, 2800
    ...more
  • Compact Chemical Process Pumps

    Compact Chemical Process Pumps

    Get Price Quote

    We present high efficiency economical pumps which are compact, high efficiency pumps for demanding budgets. Having user-friendly design, these are widely used for various industrial applications. Following are some of the major aspects of our product: 1 Simple, rugged & reliable using the most appropriate materials 2 Ideal for circulations of chemical in metal finishing (electroplating) industry 3 PVDF impellers available as per client's requirements Temperature range up to 70'C Efficient and Economical pumps for intermittent / semi continuous duties. Best suited for electroplating, filtration applications Head - 28mts Flow - 30 m3 /hr
    ...more
  • Metal Chemical Process Pumps

    Metal Chemical Process Pumps

    Get Price Quote

    Thermoseals Technologies are extremely involved in providing a varied series of Metal Chemical Process Pumps. Our products are available in diverse structures at reasonable prices.     Thermoseals Technologies are extremely involved in providing a varied series of Metal Chemical Process Pumps. Our products are available in diverse structures at reasonable prices. Features: High strength Fine finishing Longer service life Robust structure Durability
    ...more
  • Chemical Process Pumps

    Chemical Process Pumps

    Get Price Quote

    • 69% Efficiancy pumpswide range 1 HP to 50 HP
    • We offer centrifugal metallic chemical process pumps in m.o.c. - s.s.316, 304, 904l hast alloy, monel, titanium , alloy20 & rubber linning pump with mechanical shaft seal
    ...more
  • Chemical Process Pump

    Chemical Process Pump

    25,000 / Piece

    • MOQ5 Piece
    • Number Of FlowerCentrifugal Pumps
    • ApplicationOil Industries , Chemical Industries
    • Temperature250 Degree
    • Brand NameAmee
    • Model NumberACP
    • Capacity200 M3/hr
    • Casing Pressure3 kg
    ...more
  • Caustic Process Pump

    Caustic Process Pump

    19,000 / Piece

    • Headupto 120 mtr
    • Temperatureupto 140 dgree
    • BrandGanesh pump and Engineers
    • Max Flow Rateupto 250 m3/hr
    • Model Name/NumberGCPP- 80/200
    • MaterialCast Iron, Cast Steel, S.S 304 & S.S 316, Bronz etc.
    ...more
Filter by City
top