Clevis Pins Dealers

They are rolled or pressed into the cylindrical body to deform the pin stock outward within controlled limits. When this pin is forced into a drilled hole of proper diameter, a locking fit is obtained. Only a straight drilling hole is required and no reaming is needed. A few of them are illustrated above.

Owing to the years of industrial experience, we are able to serve our buyers with a wide range of Clevis Pins without Draw Hook. It is manufactured by our experts using premium quality raw material and advanced technology. Further, we check our Clevis Pins without Draw Hook on different parameters before its final dispatch. One can place retail as well as bulk orders for Clevis Pins without Draw Hook with us.   Features : Rust free Easy Installation Optimum strength

A clevis fastener is a three-piece fastener system consisting of a clevis, clevis pin, and tang. The clevis is a U-shaped piece that has holes at the end of the prongs to accept the clevis pin. The clevis pin is similar to a bolt, but is only partially threaded or unthreaded with a cross-hole for a split pin. The tang is a piece that fits in the space within the clevis and is held in place by the clevis pin. The combination of a simple clevis fitted with a pin is commonly called a shackle, although a clevis and pin is only one of the many forms a shackle may take. Clevises are used in a wide variety of fasteners used in farming equipment and sailboat rigging, as well as the automotive, aircraft and construction industries. They are also widely used to attach control surfaces and other accessories to servo controls in airworthy model aircraft. As a part of a fastener, a clevis provides a method of allowing rotation in some axes while restricting rotation in others. There are two main types of clevis pins: threaded and unthreaded. Unthreaded clevis pins have a domed head at one end and a cross-hole at the other end. A cotter pin (USA usage) or split pin is used to keep the clevis pin in place. Threaded clevis pins have a partially threaded shank on one end and a formed head on the other. The formed head has a lip, which acts as a stop when threading the pin into the shackle, and a flattened tab with a cross-hole. The flattened tab allows for easy installation of the pin and the cross-hole allows the pin to be moused. A bolt can function as a clevis pin, but a bolt is not intended to take the lateral stress that a clevis pin must handle. Normal bolts are manufactured to handle tension loads, whereas clevis pins and bolts are designed to withstand shearing forces. Clevis pins should be closely fitted to the holes in the clevis to limit wear and reduce the failure rate Product Description • There are two main types of clevis pins: with head and without head. Headed clevis pins have a head at one end and cross - hole at the other end. • A cotter Pin or Split pin is used to keep the clevis pin in place. • Clevis Pin offers more flexibility and rotation than other fastners . • It is mostly used for railway application and also in farm equipments , ships etc

a clevis fastener is a three-piece fastener system consisting of a clevis, clevis pin, and tang. The clevis is a u-shaped piece that has holes at the end of the prongs to accept the clevis pin. The clevis pin is similar to a bolt, but is only partially threaded or unthreaded with a cross-hole for a split pin. The tang is a piece that fits in the space within the clevis and is held in place by the clevis pin.[1] the combination of a simple clevis fitted with a pin is commonly called a shackle, although a clevis and pin is only one of the many forms a shackle may take.

According to EN 1677-1 with increased load capacity Alternative bolts for pewag clevis parts Standard clevis load pins KBSW. For a few parts special pins must be used (2nd table).

The varied Metal Pins we manufacture includes- Clevis pins, Knurled pins, Cam pins, Dowel pins, Pivot pins, Grooved pins, Brake pin, Locating pin, Fulcrum pin, Bumper pin, Hinge pins, Taper pins, Anchor pins, U pin and Roller pin. Fulfilling the needs of various industries, the Metal Pins have earned huge appreciation from the clients. The Metal Pins are offered at rock bottom prices

Clevis pins can be used as an adjustment replacement pin and have multiple holes allowing user to cut off any access length. Numerous sizes available. Available in yellow zinc dichromate plated versions. Countertop display also available.

The clevis pin is fully customized to meet our client�s requirement. Considering the quality factor, we have in house advanced technologies to develop and manufacture best products that have made us a front runner industrial pin manufacturer in India. With the devotion towards serving the market with the most inventive products, we fabricate high pressure clevis pin and thus have grabbed a place amongst the leading exporters.