cold rolled stainless steel strips
120 Per Kilogram
2 Ton (MOQ)
1074 Cold Rolled Steel Strips
50 - 60 Per Kilogram
Best Deals from Cold Steel Strip
Cold Rolled Steel Strips / Coils
Get Price Quote
We Offer Cold rolled strip is precision rolled to its full hard condition, then fully annealed. As the most reliable material for stamping or fineblanking, cold rolled strip provides the tightest and most consistent thickness tolerances, the highest degree of spheroidization with the softest and most consistent hardness. A fully-processed strip is also made with a clean, uniform finish.
Cold Rolled Steel Strips
100 - 110 Per Kilogram
500 Kilogram (MOQ)
Cold Annealed Steel Strip
Get Price Quote
Cold Rolled Steel Strips
Get Price Quote
Our company is an eminent Manufacturer, Exporter and Supplier of Cold Rolled Steel Strips from Delhi. We make use of high grade components and advanced machinery for fabricating reliable strips. Used majorly in automobile industry, our steel strips are appreciated for their remarkable strength, corrosion resistance and high compression resistance. Customers can rely on us for delivering orders of Cold Rolled Steel Strips within stipulated time. Details : Produced by rolling the strips in hot strip mills Prior to cold rolling, the mill scale has to be removed These strips are produced normally by the pickling process which uses mechanical manipulation and acid to dissolve the surface scale Cold Rolled Steel Strips are largely used in automobile and bicycle industry
Carbon Steel Cold Rolled Steel Strip
Get Price Quote
Cold Rolled Steel Strips
Get Price Quote
These Cold Rolled Steel Strips can be availed at market leading prices. Our products are kept under safe conditions in our well-maintained warehouse. The facility is installed with all required amenities and supervised by experts for safe storage. Our company is capable of delivering consignments on time owing to an efficient trading network we have.
Cold Rolled Steel Strips
Get Price Quote
WE OFFER COLD ROLLED STEEL COILS SLITTED TO REQUIRED SIZE AND SPECIFICATION OUR PRODUCTION RANGE IS AS FOLLOWS Thick : 0.05mm to 5.5mm Width : 3mm to 1560mm Grade : IS 513 D,DD,EDD,IFS High Strength Grade: ST52, ST46, TR46, HSLA400, SAPH440, SPCH
Cold Rolled Steel Strip
45 Per Kilogram
Cold Rolled Steel Strips
Get Price Quote
JSC Ispat Pvt. Limited is one of the recognized Manufacturers, Exporters & Suppliers of Cold Rolled Steel Strips. Widely known for their best quality raw materials and wide application areas, our Cold Rolled Steel Strips have very bright smooth finish and extra softness. This enables them to be appreciated by our clients.
Cold Rolled Steel Strips
Get Price Quote
Knd steel syndicate serves a wide range of the steel industry. Our cold rolled carbon steel strips and coils are fit for demanding automobile & industrial applications. We cater to auto component manufacturers, electrical switchgears, cutting tools, pen clip, hair clip, hanger clip, chain link manufacturers among others. Available strip & coil grades - c-40 en-8 mc 11 c-55 en-9 mc 12 c-60 en-43 d c-80 en-42 j c-98 en-44 d 50crv4 en-47 strip & coil sizes - width from 5 mm to 400 mm thickness range - 0.10 mm to 5.0 mm hardness range - fully annealed, annealed, as rolled surface finish - bright mirror finish
Cold Rolled Steel Strips
Get Price Quote
WALZEN MAKE HIGH TENSILE STEEL STRAPPINGS are manufactured from low and medium carbon strapping quality cold rolled steel strips produced in-house with utmost care. The strips are then deburred, austempered, painted and waxed in a continuous line with automatic controls, incorporating the latest state-of-art technology. Proper selection of steel is made to ensure ideal combination of physical properties.
Cold Rolled Steel Strips
Get Price Quote
Today NEZONE is regarded as a leading manufacturer of Welded Steel Tubes & Pipes And CRCA Strips. We stand to address market opportunities with customer worldwide through our PAN India Units having a combined manufacturing Capacity of 2,50,000 M.T for steel weld tubes & pipes, and 24,000 M.T of Cold Rolled Close Annealed (CRCA) Strips per year. The array of applications of NEZONE’s Product range from: water supply & Irrigation to Structural & Scaffolding, from automotive to other general Engineering Purposes. NEZONE is well posed to cater to India’ Double Digit Growth Path. Product Speciality Thanks to state-of-art-process and technology, Nezone Strips Limited offers CR strip/Sheet of best quality for demanding applications. The company offers the following product advantages: Superior shape control and consistent flatness, a special feature of our 4 Hi/ Mill. Excellent surface quality. Wide range of grades from full hard to extra deep drawing. Custom built thickness and width combination to minimise wastage at customers end. Product Testing & Quality Assurance The quality department is fully equipped with following equipment to carry out variety of test required. Rockwell Hardness Tester and Vicker Hardness Tester. Universal Tensile Testing machine. Fully equipped quality laboratory for chemical properties. All finished products are tested for various quality like hardness, tensile strength, elongation, Erichsen value, and only those that meet the required specifications are dispatched to customers with proper packing in polythene and HDPE/hessian cloth wrapping/wooden pallets after applying rust preventive oil. The coil number and other details are marked clearly with sticker on the coil.
Tempered Cold Rolled Steel Strips
Get Price Quote
Backed by a team of experts who hold years of experience in the industry, we offer a comprehensive range of Special Tempered Cold Rolled Steel Strips. These are basically as rolled hard steel strips. To achieve desired hardness, material of suitable thickness is taken and rolled down to desired thickness that requires hardness. After rolling, the material is pinch passed and final product is obtained. Our range is suitable for components where formability is limited. The strip is directly punched and formed. Moreover, these strips are available in low, medium and high carbon grades.
Cold Rolled Narrow Steel Strips
Get Price Quote
Detailed Product SpecificationsCold rolling is a metallurgical process, in which metal is passed through a pair of rollers at a temperature below its recrystallization temperature. After the rolling process, the metal is annealed by heating it above the recrystallization temperature after every few rollings, to prevent it from becoming brittle and cracking.Made from hot rolled narrow steel strips, strips are used to produce steel pipes.Available Specifications: Q195, Q215, Q235. Only black annealed strips available at presentClassifications: Cold Rolled StipsThickness (mm): 0.6-2.0 mm Width (mm): 40-270 mmCoil Weight (mt): 1.8-2 MTInspection DetailsSGS or any other agency as per your requirement.
Cold Rolled Hardened Tempered Steel Strips
Get Price Quote
we are offering cold rolled hardened tempered steel strips. Spring steel strips harden tempered. This material is use for saws, blade, auto components, springs, coil springs, spire spring, door springs etc.
Cold Rolled Steel Strips
Get Price Quote
Specifications of Cold Rolled StripsCoil: 1. Grade: AISI 200,300 & 400 series 2. Thickness: 0.20mm to 3.5 mm 3. Width: 250mm to 750 mm (Mill Edge) 4. 5.0 mm to 730 mm (Slit Edge) 5. 2R Work Harden for Specific Hardness
COLD ROLLED AND SPHERODIZED ANNEALED STEEL STRIPS
Get Price Quote
Cold Rolled Steel Strip is produced, as the term suggests by the further rolling of strip produced by the hot strip mills. Prior to cold rolling, the mill scale has to be removed, normally by the Pickling Process which uses mechanical manipulation (around small diameter rolls) and acid to dissolve the surface scale. The surface is then washed to remove the acid and a light oil added to prevent rusting. Why Cold Rolling:- Reduce the thickness Improve the surface finish Improve the thickness tolerances To offer a range of “tempers” As a preparation for surface coating COLD ROLLING STEEL PROCESS Cold-rolling steel is the process of steel flattening by passing the steel through a series of rollers. It is called Cold Rolling (or Cold Rolled) because the steel is kept below its recrystallization temperature. Cold rolling steel makes it up to 20% stronger and improves the surface finish. Cold-rolled sheets and strips come in various conditions: full-hard, half-hard, quarter-hard, and skin-rolled. This cold rolling process and equipment change the mechanical properties of the steel, producing certain useful characteristic combinations*, including (but not limited to): DuctilityHardnessStiffnessStrength *Based on customer requirements. We have two rolling stations. The initial cold rolling is undertaken on a more powerful “break down” mill that is capable of heavy reductions. After annealing to remove the stress and work hardening introduced in the process, the final cold rolling or “skin-pass” takes place. This is a light reduction (typically 3%) to improve the surface finish. Our Cold rolling mills are reversing mills. A reversing mill is where the steel enters the rolling mill from one side, passes through the other side and then comes back through the mill again. Normally it will go left to right through the mill a number of times being rolled a little thinner each time it goes through. Cold rolled strip can be produced in various conditions such as skin-rolled, quarter hard, half hard, full hard depending on how much cold work has been performed. This cold working (hardness) is often called temper, although this has nothing to do with heat treatment temper. In skin rolling, the metal is reduced by 0.5 to 1% and results in a surface that is smooth and the yield point phenomenon–excessive stretching and wrinkling in subsequent operations, is eliminated. This makes the metal more ductile for further forming and stretching operations. Quarter Hard, Half Hard, Full Hard stock have higher amounts of reduction, up to 50%. This increases the yield point; grain orientation and material properties assume different properties along the grain orientation. However, while the yield point increases, ductility decreases. Quarter Hard material can be bent (perpendicular to the direction of rolling) on itself without fracturing. Half hard material can be bent 90º; full hard can be bent 45º. Thus, these materials can be used for in applications involving great amounts of bending and deformation, without fracturing. Classical Cold Rolled is produced on narrow strip mills typically offering widths up to 500mm with “close” gauge control and a wide range of sizes, qualities and hardness’s. Cold rolled sheet products are available for a multitude of applications such as appliances, automobiles, agricultural tools etc. They offer better control of thickness, shape, width, surface finish, and other special quality features that compliment the emerging need for highly engineered end use applications. To meet the various end use requirements, cold-rolled sheet products are metallurgically designed to provide specific attributes such as high formability, drawability, high strength, high dent resistance, enamelability, and paintability. The first step in manufacturing Cold Rolled Sheet Products involves cold reducing coils of hot-rolled, pickled product to a thinner thickness. The primary feature of cold reduction is to reduce the thickness of hot-rolled coils into thinner thicknesses that are not generally attainable in the hot rolled state. The cold reduction operation induces very high strains (work hardening) into the sheet; thus, the sheet not only becomes thinner, but also becomes much harder, less ductile, and very difficult to form. However, after the cold-reduced product is annealed (heated to high temperatures), it becomes very soft and formable. In fact, the combination of cold reduction and annealing lead to a refinement of the steel that provides very desirable and unique forming properties for subsequent use by the customer. The hot-rolled, pickled coils incoming to the cold reduction mill are of excellent quality attributes. The pickling operation is well-controlled to assure that all the oxides formed during hot rolling are removed. The thickness of the hot-rolled strip is important in that the properties of the final cold rolled and annealed product is influenced by the percent of cold reduction. This means that the thickness of each hot-rolled coil is carefully controlled to provide the mill with a specific thickness to achieve the proper percent cold reduction. Among other things, the percent of cold reduction affects the forming behavior of the product after annealing. The production of a specific thickness of cold rolled sheet to meet an end user’s requirements involves sophisticated processing. Steel chemistry, hot strip mill processing variables, pickling practices, cold-rolling mill practices, annealing practices, and finally, temper rolling practices all have a role in achieving the manufacture of top quality cold-rolled sheet products. This product is manufactured for a large number of applications that require a variety of properties from fairly simple to very sophisticated. The product is typically available at thickness as low as 0.10 mm to 5.00 mm.
Cold Rolled Strips
Get Price Quote
