Compression Presses Dealers

• Country of Origin: India
• Application: Molding Rubber
• Weight: 100-1000kg
• Voltage: 110V
• Condition: New
• Power: 1-3kw
• Driven Type: Electric
• Warranty: 1year

Explore Divyanshi Engineering is a premier supplier of hydraulic compression molding presses and press lines to the plastics industry. Our compression molding presses are used to produce composite parts of varying complexities in the manufacturing process of thermosets, thermoplastics, as well as elastomers, and natural rubbers. Features & Control :- Fully Automatic LCD Touch Screen control panel with PLC. User Programmable Moulding cycle. Operation of machine in both Manual and Automatic Mode. PID controlled temperature controller and indicator. Note:- Customized Size Also Available as per the customer requirement.

• Type: Triple Action
• Power: 75 HP
• Brand Name: Hysan
• Material: Mild Steel
• Capacity: 5-7 Ton/hr
• Automation Grade: Automatic
• Phase: 3
• Oil Tank Capacity: 2000 ltr
• Working Pressure: 3300 PSI
• Usage: Usage

Tablet Press-TabXpress-IV High Speed Double Sided with Pre-Compression Tablet Press- GMP Model Application & Process : Prism TabXpress-IV is a High Speed Double Sided Rotary Tablet Compression Press suitable for millennium batch size production. TabXpress-IV designed in an effort to exceed the highest cGMP requirement and to ensure the most economical and efficient tablet production. The TabXpress -IV features a unique ergonomic design for EASY to Operate, EASY to Fast Changeover, EASY to Clean with minimum down time. The TabXpress is completely separated into three zones i.e. Tablet Compression zone, Machine service zone and Electrical controls zone. The Optional feature of TabXpress-IV machine can provide with Touch Screen Operate Interface with PLC Controls, which is mounted in a separate electric controls cabinet. The TabXpress-IV Tablet Press is offered in four different models viz. Tooling 45 Stn "D" Type, 55 Stn "B" Type, 69 Stn "BB" Type, 75 Stn "BB" Type. The Machine Ergonomics Design Concept : The TabXpress-IV has been completely new designed according to the most modern ergonomic aspects. cGMP confirm. Machine's basic construction with separate compression zone and drive zone and electric controls zone. Fast Cleaning and Changeover capability. Stainless Steel and Acrylic Glass Surrounding. Easy to Operate and Maintenance. Salient Features : Design Conforming to cGMP standards. Contact parts SS 316 and non contact parts SS 304. TabXpress-IV is high speed double sided tablet press with internal gear drive, pre compression and suitable for medium size batch production and offered in three model "D" , "B" & "BB" Tooling Simple and Convenient Operation, Changeover, Cleanliness, Operator Protection and Easy to Maintenance. Pre-Compression System to improve tablet quality All Controls like tablet thickness, weight adjustment, Pre-press adjustment are in front of the machine and outside the compression zone Turret Drive from Closed Gearbox through Internal Helical Gearing with Continuous Lubrication. Electro Magnetic Clutch Drive for Safety, Ease and Maintains Free operation. A C Frequency drive for Turret Motor and Feeder Motor. Force Feeder for Powder Feeding with Bottom side drive. Fast changeover and Easy cleaning designed with Easy removal Weight adjustment sector. Upper guard with Hydraulic Cylinder and Lower guard From S.S. 304 fitted Limit switch. Turret made from Special graded casting and option for 3pc.turret with S.S.316 Diepot. Hydraulic Power Pack for Pressure Loading & Overloading release. Auto Lubrication System for Turret gearing and fulcrum pins. Paint free Tablet Compression zone. Dust suction nozzle for Controlling Dusting. Closed Dust free Front Electric Control Panel easy Removal type Optional Features : Gravity feeder System. Powder level sensor in hopper. During Start and Stop Rejection and Sampling device Advance PLC controls with Touch Screen interface.. Safety Features : Interlocked upper guard and Overload relay protection. Overload pressure release mechanism. Emergency stop button.

The Double Rotary Tablet Press With Pre-Compression is suitable in industries that require use of compressed input for processing into final output. The press is equipped with ACVF drive for the main motor as well as force feeding motor, which enable operator to synchronize press feed with feeding. Available at affordable rate, this tablet press can be customized with optional parts as per customer requirements.   High Speed Tablet Press - Double Rotary with Pre-Compression : 45 / 55 / 69 / 75 Stations. It is High Speed Double Rotary type Tablet Press suitable for large batch production having capacity of higher table output and built with full consideration to GMP standards. Force Feeding Attachment and AC Variable drive with Electromagnetic clutch are standard features of the Double Rotary Tablet Press. High Speed Double Rotary Tablet Press is available in 37 station 'D' tooling or 45 station 'B' tooling, 55 station 'BB' tooling or 61 station 'BB' Tooling.

The Genesis Series Hydraulic Compression Press, Model G50H-19 ASTM is specially designed to vulcanize rubber sheets to provide samples for quality control, research and development and material comparison to prepare sheets for material property testing in accordance with ASTM D3182. Bump, breathe, degas Temperatures up to 500°F Features of the Rubber ASTM Presses: Specially designed platens for improved temperature uniformity (only on 2.5) 19″ x 19″ platens accept all standard sample mold sizes Adjustable clamp force: 8 to 50 tons Self contained hydraulic unit Allen Bradley PLC with operator interface 1/16 DIN digital temperature controllers Fully guarded clamp area with interlocked operator gate Optional contact gauge for quiet operation Optional low pressure system for operation from 2 to 50 tons Automatic bump

• Balling Chamber (W x H x L): 9
• Bale Size: 9
• Bale Weight (MS) Kgs (Approx): 10-35 Kg
• Power HP (3 Phase 1440 rpm): 5 HP
• No. of Compression: Single
• Door Opening: Manual
• Type: Single, Double, Triple, Fully Automatic

• Automatic Grade: Automatic, Semi Automatic
• Power: 1-3kw
• Capacity: 300 - 400 Ton
• Phase: Three Phase
• Brand Name: Perfect
• Control Type: Cnc, Non-cnc
• Roll Nip Adjustment: Manual , Motorized , Controlled by LVDT
• Day Light Gap: 5''''

With complete help and support of our team members, we deliver high grade and excellent range that commensurate to globally accepted standards. With the assistance of our reliable transportation facilities, we have become capable of delivering the orders on time.

• Brand Name: Axtech
• Platen Size: 650*550 mm
• Automation Grade: Automatic
• Surface Treatment: Painted
• Material: MS
• Power Source: Electric

• Application: Used to make bundles of all kinds of light metal scrap, mild steel scrap, turnings and borings, shavings of stainless steel, chips, wire rods, miss rolls, tin, CRCA & G.I. sheet Cuttings, aluminium, brass and copper scrap.
• Brand Name: First House
• Condition: Good
• Country of Origin: Raipur,Chattisgarh
• Feature: Its rigid make, efficiency and hassle free operations.
• Product Name: Double Compression Scrap Baling Press.
• Min. Order Quantity: 1 Number

Our company is actively engaged in manufacturing and supplying of Double Compression Scrap Baling Press. We develop Double Compression Scrap Baling Press of various capacities that is used to make bundles of all kinds of light metal scrap, mild steel scrap, turnings and borings, shavings of stainless steel, chips, wire rods, miss rolls, tin, CRCA & G.I. sheet Cuttings, aluminium, brass and copper scrap. Clients appreciate the Double Compression Scrap Baling Press offered by us owing to its rigid make, efficiency and hassle free operations.

Our Compression Molding Press is built-to-last long and requires the least maintenance. We are backed by a team of quality controllers who make sure that the offered lot is in complete conformity with the quality standards. Our reliable and superfast shipping facilities will not let you wait much and will efficiently deliver the range to your doorstep.

The range of Compression Molding Presses we offer are as follows We manufacture 5 tons & 30 tons capacity hydraulic compression Molding presses for various laboratory applications.

Triple compression Scrap baling Presses, balers are used for reducing three dimensions of the scrap material by using hydraulic force from three different angles. The two horizontal cylinders of the Triple compression Scrap baling Presses are arranged at right angles to each other.

• Brand Name: HIND
• Supply Ability: 10 Unit/Units per Month
• Packaging Details: We follow all the standard packaging norms as per the requirments.
• Model Number: N.A
• Lead Time: 5
• Place of Origin: Haryana, India

• BALING CHAMBER: 40" x 48" x 84" (H x W x L)
• BALE SIZE: 20" x 20" x 10-20" (H x W x L) 
• BODY: FABRICATED
• OIL DRIVE: GEAR CUM PLUNGER PUMP
• THICKNESS OF THE PRESSURE PLATE: 24"
• FORCE ON EJECTOR CYCLINDER: 12 TONS
• TYPE OF EJECTION: TOP EJECTION
• WORKING PRESSURE: 3300 PSI
• HARD LINER PLATES: PROVIDED
• SHEARING BLADES: PROVIDED
• STARTERS: PROVIDED 2 NOS.
• WEIGHT OF  THE BALE: 150 - 240 KGS.
• IDLE CYCLE TIME: 100 SECONDS (APPROX)
• WEIGHT OF THE MACHINE: 25 TONS (APPROX)
• OIL TANK CAPACITY: 1800 LTS.

We offer hydraulic presses for Moulding Hydraulic Press maximum 600 tons and in higher capacities as per customer requirements. these presses are made out of tested materials, press frame is made out of tested ms plates, stress relieved after fabrication and machined for accuracy, hydraulic cylinders are made out of tested ms seamless pipes, ram is made out of carbon steels, imported seals are used in the hydraulic cylinder, reputed make hydraulic pumps and valves are used in the hydraulic system, shell and tube heat exchanger is provided in the hydraulic system to avoid temperature rise of hydraulic oil.electrical control panel with relays, is provided for manual operation of the press..platens either electrically heated type with digital temperature controllers.

• Brand Name: Shree
• Power: 11-15 kW
• Voltage: 220 V
• Warranty: 1 year
• Material: Mild Steel
• Working Pressure: 2500-3000 psi
• Motor Power: 30 HP
• Frequency: 50-60 Hz
• Bail Weight: 60 to 75 Kg
• Machine Weight: 1000-1200kg
• Bale Size: 36*27*24 inch
• Scrap Pressing Time: 45-50 Sec

Slach Hydratecs hiteck four post compression and transfer moulding presses are specifically designed for multy purpose use for rubber and polymer industry. Engineered for trouble free, minimum maintenance and compact construction with maximum energy utilisation by advanced hydraulics and electricals. Extra strong frame with stress proof tie rods and X-ray tested bolsters are used as standard with highest degree of precised machining and tolerences for parallism within press frame and rigidity during clamping and curing.

Hydraulic Compression Press: The Equipment is known as Hydraulic Compression Press, Compression Test Machine, Hydraulic Compression Press for Plastic Lab, Test Lab Press, Hydraulic compression press used for Research and Development, Plastic Laboratory Testing Equipments, Compresson Tester, etc.  

• Platen Size: 250 x 250 mm
• Condition: New
• Country of Origin: Made in India
• Capacity: 60 Tons
• Machine Type: 4-Pillar Type
• No. of Station: Single
• No. of Daylight: One
• Stroke Length: 150 mm
• Bore Diameter: 180 mm
• Motor Power: 3 HP

Description / Specification of Compression Press We are involved in offering a wide range of Compression Press to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.We introduce ourselves as an eminent trader and supplier of an extensive array of  Compression Press. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.Features: Sturdy design Highly durable Application specific design   

We offer Powder Compression Press. It contains metal container for filling a certain amount of powder that can be compressed into solid form. Our powder compression press is used extensively in various industrial segments where compression of powder into solid form is done. Special attributes : easy to uselow maintenancespecifically designedcost effectiveexcellent performance yieldingdurable application areas : cosmetics industryother powder compacting industries

We bring for our clients a comprehensive range of Double Compression Baling Press that is reputed for excellence in performance, quality, workmanship and dependability. These double compression (with ejector cylinder, manual door) baling press are appropriate for all types of ferrous and non-ferrous light metal scrap material including stainless steel, MS scrap, aluminum, brass, copper and other industrial tin sheets. Salient features: The production capacity ranges from 1 ton to 8 tons per hour and more as desirable The operation of press is done by hand lever operations, semi-automatic function & fully automatic operation through PLC Programmable Logic Control Shearing blades and replaceable wear-resistance plates can be provided for the long life of the feeding chamber All parts contacting the scrap is covered with 40 HRC hardness, 10 mm thickness having hardened sheet metal resulting in lengthened machine life Hydraulic pistons are designed to work under hard conditions and are installed with the most suitable sealing In presses, there are 2 compressing systems. In 2 compressing systems; after the scrap is put in charging box, first cover lid compresses scrap. It also closes the charging box, secondly main ram moves forward and after pressing the scrap pushes the bale out All the machines are rigorously tested prior to the delivery

• Power: 440 V AC, 3 Ph.
• Model No.:  
• Capacity: 10, 30, 50 ton (Optional)
• Temperature: Room Temp.
• Timer: LED. 0.01sec.
• Heat Plate Area: 315 X 288 mm
• Cooling method: water (Optional)
• Dimension (WXDXH): 100 X 70 X 150 cm
• Weight: 765 Kg.

Hydraulic Compression Press Fully Automatic Operation. Capacity : 0-15 tones and as per reqirement Platen size : 250mm x 250mm and as per reqirement Day Light : 150 mm Platen movement : by hydraulic system (up strokes) Individual micro processor based digital temperature controller for both platens. Two number of digital timers for curing & cooling cycle. Heating & cooling system in platens.

Vertical Compression Baling Press for Book-Binders for handling of waste paper/corrugated boards, stationery (shreded and unshreded), plastic / fill waste etc. Ideally suited for the pressing of Paper waste, Corrugated boards, Stationery etc. and manually bundling the pressed bales for saving in storage space, transportation and manpower. Our Vertical Compression Baling Presses are known for their quality, workmanship and reliability since 1984. Our presses are available in single compression. These presses are capable of compressing various leftovers metal structural, hdpe/pp woven sack bags and wooden waste. Salient common features: The production capacity ranges from 0.5 ton to 10 tons per hour and more as desirable The operation of press is done by hand lever & semi automatically. Hydraulic pistons are designed to work under hard conditions and installed with the most suitable sealings All machines are rigorously tested prior to the delivery

Our range of Hydraulic Rubber Compression Moulding Presshas a compact design and is an easy to operate system. These Rubber Moulding Press are highly durable in nature and available in the market at affordable prices. The offered power packs are designed and developed by the professionals of our firm in accordance with customer's requirements.Features: Fine finish Durable performance Superior strength Innovative designs

hydmark’s ability to engineer & manufacture custom hydraulic presses, per the specific demands of our customer’s applications, can greatly impact an operation’s overall efficiency & profitability. Having the right tool for the job is paramount, and hydmark’s decades of experience building presses which are optimized to handle specific tasks, makes us the go-to manufacturer for custom hydraulic press equipment.    application  die decamping

Features: 1.Highly Automated but very simple in operation through two nos 2.Manually operated Direction Control Value. 3.One to operate the top lid and another to press the scrap 4.Single compact unit mounted over channel, Front Door Operation Manually (Closing & Opening) 5.No Civil Foundation is required.

• Press Capacity: 20 T / 40 T / 60 T / 100 T
• System Status: Digital
• Temperature Controller: Micro processor based double display digital PID controller
• Temperature Range: Ambient to 200°C
• Timer: Micro processor based double display digital timer with Hooter
• Timer Range / Resolution: Up to 999.59 min. / 1 sec.
• Insulation: Heat insulator in form of Teflon sheet inserted between heating & cooling plates
• Ram Movement: Down acting
• Distance Between Tie Bars: Distance between tie bars is 260mm
• Motor: 1.5kW
• Ram Closing Speed: 3.5mm/sec.
• Ram Opening Speed: 5mm/sec.
• Max. Daylight: 250mm or optional
• Min. Daylight: 50mm
• Max. Stroke Size: 200mm or optional
• Power Supply: 440V AC, Three phase, 50Hz