Dial Indicators Dealers

• Display Type: Analog
• Material: SS
• Features: Resistant to corrosion, Latest technology used, Fine finishing .
• Brand Name: VTC
• Application: Industrial
• Shape: Round

waterproof dial indicator - we have complete range of measuring tools..

• Material: Stainless Steel
• Shape: Round
• Color: Metallic
• Application: Industrial, Laboratory
• Display Type: Analogue
• Type: Dial Indicators
• Country of Origin: India
• Metric Range: 0-10 Mm

KANN brand dial gauges are made in INDIA with the utmost precision  in our  modern factory. Having a thick knurled bezel for zero setting . The 8 mm stem is made of stainless steel duly hardened & ground. The plungers are of stainless steel with high precision grinding and lapping.

Dial snap gages-series 201series 201features designed for quick gong judgment of diameters of cylinders and shafts in machining processes. Dial indicator is optional. Anvil retracting stroke: .078ã�â¢ã¯â¿â½ã¯â¿â½2mm anvil positioning range: 1ã�â¢ã¯â¿â½ã¯â¿â½25mm wide (.53 x .47ã�â¢ã¯â¿â½ã¯â¿â½13.5 x 12mm), flat carbide anvils. Both front edges of the anvil are chamfered for easy insertion. Technical data accuracy: refer to the list of specifications anvil retracting stroke:.078ã�â¢ã¯â¿â½ã¯â¿â½2mm anvil positioning range: 1ã�â¢ã¯â¿â½ã¯â¿â½25mm anvil flatness: .00004ã�â¢ã¯â¿â½ã¯â¿â½1ã��ã�âµm

• Range: 0-10mm
• Material: Stainless Steel
• Shape: Round
• Brand Name: TRUSIZE
• Meter Type: Analog
• Graduation: 0.01MM

We offer a superior range of dial test indicator, which is extensively used as a holding device for dial indicators. These are heavy and rigid in construction and the column can move to and from to full base length. Both faces of the base can be used and our range is offered with the facility of fine adjustment for accurate settings. It is based on advanced technology and is tested at regular intervals during the production cycle indicator.

Salient Features: Includes actual calibration certificate. Supplied to company standard. Suppled in INCH and METRIC least count.  

• Tool post holder: 9.5 * 19 * 150
• Upright spindle: 8 dial * 115 L
• Universal Clamp: 6.5 and 8 holes
• G – Clamp: 33 capacity round or flat

Rectangular Holder type AM 8 mm*4.8 mm pin diameter 4 mm.Rectangular Holder Type BM 13 mm*6mm, pin diameter 4 mm.Cylinder Holder Type CM 9.5 mm diameter, pin diameter 4 mm.Swivel Clamp with Dovetail Holder (Metric models) Bore diameter 4 – 9.5 mm.Knuckle Joint Holder (Dovetail).Rectangular Holder Type A 5 / 16 “ * 3 / 16,pin diameter 1 / 4 “Cylindrical Holder Type C 3 / 8 “ diameter pin diameter 1 / 4 “.Swivel Clamp with Dovetail Holder (Inch models) Bore diameter 1/4–3/8 ”.   Extra contact points With Domed Anvil and Round Anvil Tommy bar. Hole attachment with indicator Mounting hole and swivel Arm 9.5 hole for dial indicator.

Staffed with latest machines and leading technology, we make certain that the material we use is as per the stated norms and meet the international standards. We are supported by an advanced packaging system and make use of only high quality packing materials for ensuring complete safety during handling, warehousing and transit.

PRODUCT DESCRIPTIONFeatures : Shock proof metalised dial mechanism provided with 2plates{lug back and flat back

• Graduation: 0.01 mm
• Measuring range: 5 mm

Product Description We are instrumental in catering to the variegated requirements of the customers by bringing forth Dial Indicators. These dial indicators are manufactured under the supervision of expert professionals at our vendors end. Post production, our vendors make these dial indicators pass a quality check so as to ensure their flawlessness.   Specifications: Small type dial indicator with 15 mm stem length Can be fixed with Jigs and allied certainly

• Brand: Mitutoyo
• Application: Industrial, Laboratory
• Range: 12.7 mm
• Resolution: 0.001 mm
• Model: 543-390
• Accuracy: 0.003 mm

SPECIAL FEATURES :-  INDICATES GATE OPENING OF RADIAL & VERTICAL GATES. VERTICAL OPENING OF RADIAL GATES. CONTACTLESS ELECTRONIC LIMIT SWITCHES FOR FULL CLOSE AND FULL OPEN POSITIONS. WEATHER PROOF GALVANISED POWDER COATED LOCKABLE ENCLOSURE. HEAVY DUTY BRASS GEARS ASSEMBLY. ON SITE  SELECTION OF CLOCKWISE AND ANTI-CLOCKWISE MOVEMENT OF INPUT SHAFT. BALANCED ALUMINIUM HANDS & ALUMINIUM DIAL SUITABLE FOR VARIOUS TYPES OF MOUNTING POSITION. Vidyut Mechanical Dial Indicators are designed and manufactured specially for Dam Duty keeping in view the need to improve and overcome the limitations and maintenance problems of existing Dial Indicators. To overcome various problems and to increase the reliability, VIDYUT dial Indicators have the following unique features:The Dial Indicators are made from Heavy Gauge sheet Steel Box duly Electro Galvanized, Powder Coated & Oven baked at 200° C to avoid the problem of corrosion against humid atmosphere at dam site.The door is provided with Rubber Packing and Acrylic front window with the double-flanged rubber packing, to protect against Rainwater and insect.The coupling between the gate floating shaft or end reduction gear shaft and the Dial Indicator input shaft is through chain or flexible coupling so that misalignment doesn’t affect the performance of Dial Indicators. The input shaft of the Dial Indicator is of 19 mm with support of 2 nos. sealed ball bearings. The mounting accuracy and centrality is maintained by special double holding Bracket which holds the gear shaft on one side and bearing shaft on other side. The Dial and hands are made from Aluminum and painted with Epoxy Paint baked at 200°C so that it is not affected by the weather.  The scale markings are screen printed with scratchproof ink or engraved. The dial can be marked in Radial or Vertical opening for Radial gates. The movement of the Pointer is generally clockwise. However, to match with the movement of the gate shaft, clockwise and anti-clockwise movement of the input shaft can be selected at site. The gears of the Dial Indictor are made of brass mounted on the accurately drilled brass plates with brass output shaft. Screws and Nuts used for the fittings inside and the Dial Indicator are of Stainless Steel. The Limit Switches provided are of NON-CONTACT Electronic type totally sealed weather proof switches. As there is no physical contact like Cams, etc. and no mechanical force required to operate the limit switches, the operation is very smooth and accurate.  The limit switches being totally sealed, the question of vermines and insects going in and jamming the contacts is not possible. The Limit Switches are set from the front with the screw driver arrangement so that setting procedure is very easy and Limit Switch can be accurately set as required. The Dial Indicator is provided with Siemens type locks and provision is also there for putting a padlock.The INPUT SHAFT of the Dial Indicator can be connected to the Gear of the Gate Shaft by any one of the following ways: The Dial Indicator can be mounted on the Hoist Motor Cabin where the starter is provided, so that the operator can see clearly what is the gate opening and can stop at the desired opening of the gate.  The Input Shaft is connected with Floating Shaft by Heavy Duty DUPLEX Chain and Sprocket. This is the most convenient position from the point of safety, operation of gate and accuracy. The Input Shaft of the Dial Indicator is connected to the extended Shaft of the End Reduction Gear with Flexible Coupling. The Dial Indicator is supported on a stand over the floating shaft on the bridge and connected to the Floating Shaft by Duplex Chain and Sprockets. In hydraulic hoist the mechanical dial indicator input shaft can be driven by Chain or rope coming from the gate and counter weight system. 

Features • Manual Power On/Off, Zero, Tolerance & Metric/Imperial buttons • Zero setting at any position • Metric/Imperial system conversion at any position • With data output interface (Cable 40-406) • Low measuring force

• Range: 10mm
• Material: Stainless Steel
• Brand: Mitutoyo
• Model Name/Number: 2046S
• Graduation: 0.01mm
• Series: 2
• Dial Face: 0 - 100
• Stem Diameter: 8mm
• Height: 6.09 cm
• Item Volume: 0.001 Cubic Meters
• Item Weight: 130 Gram
• Width: 8.38 cm

• Resolution: 0.01 mm
• Range: 1 mm
• Brand: Insize
• Dial Reading Scale: 0-100-0
• Range Per Revolution: 0.20 mm
• Size: 12cm x 8cm x 5cm
• Accuracy: 0.001 mm

• ACCURACY: ±0.008 mm, ±0.003 mm

Top Quality mechanism with clear graduations. Metric models include 2 dovetail stem of dia. 6 mm & 8 mm. Inch model includes 2 dovetail stems of dia. 532" & 38".

• Display Type: Large easy read LCD display
• Range: 12.7 mm/0.5",25.4 mm/1",50.8 mm/2"
• Resolution: 0.001mm/0.00005" or 0.01mm/0.0005"
• Features: Strong built , Durable , Precision designed
• Usage/Application: Industrial
• Accuracy: 0.004mm/0.00016" to 0.015mm/0.001"
• Speed: No response speed limit
• Brand Name: KANGAROO

Lever Dial Indicators We are distributor & trader of Lever Dial Indicators. Features:   Jeweled bearings assure higher sensitivity and accuracy. Reversible measuring direction. Two holding bars are supplied. (Full sets only.) Fully adjustable bezel/dial face. Contact point is adjustable within 220°. Bezel is sealed with on O-ring to keep out water/oil.

• Features: Energy efficient, Optimal endurance, Easy to operate .

• Range: 0.8 mm
• Country of Origin: Made in India
• Model Name/Number: 2380-08
• Usage/Application: Laboratory
• Graduation: 0.01 mm
• Accuracy: 0.013
• Dial Diameter: 2inch
• Hysteresis: 3um
• Measuring Range: 15.7mm
• Brand Name: Insize

• Range: 10mm
• Brand: Insize
• Model Name/Number: 2301-10
• Usage/Application: Industrial
• Measuring Range: 10mm
• Size: 10mm

• Model Number: 2046S
• Brand Name: MITUTOYO
• Supply Ability: 100 Piece/Pieces per Day
• Port: CHENNAI

• Mounting: Surface, Panel, bottom or back entry
• Type: Capillary distance or Rigid stem type
• Accuracy: -/+1% FSD
• DIAL SIZE: 100, 150, 200, 250mm
• CASE: W.P Cast AL.or Stainless Steel
• CAPILLARY PROTECTION: 3 Mtr. Long Copper, PVC or StainlessSteel Capillary.
• BULB & STEM: Mild Steel or Stainless Steel
• BULB, STEM LENGTH: Std. 12" long or as required
• BULB & STEM DIA: 3/8", 1/2" OD or as required
• CONNECTION: 1/2" BSP(M) or as required

Null balance pressure system Analog indicator. Range +/- 0.04mm / Least Count 0.001mm. Range +/- 0.02mm / Least Count 0.0005mm. Single knob Calibration Facility. Tolerance Pointers. Compatible to all types of APG and ARG. Unit mounted Filter Regulators.

We are offering flexbar precision dial indicators featuring unique combination of central lug and magnetic back plate. Each face has dual scale continuous & balanced. Inch and metric models available. Specifications and quality features: • tolerance pointers standard • bearings made from special brass. • bezel clamp standard. • lug back is integral with case. • constant measuring pressure return spring lever. • hardened and lapped pinions. • stainless steel hardened stem. • superfinished stainless steel rack spindle. • revolution counter on face. • rotatable bezel with positive clamp for zero setting. • unbreakable crystal. • all parts interchangeable. • totally enclosed case protects movement from dust and oil. Model no. 11998, dial indicator • graduations: .0005" • range: 1" • dual scale: 0-100 • diameter stem: 38" • mounting: central lug 14" diameter hole.

• Application: Industrial
• Display Way: Dial
• Body Material: Stainless Steel
• Size: 0.3mm

SKU: V2 Brand: Baker Product Details: Range: 25mm/1" Resolution:0.01mm/0.0005" Type: V2