Drum Heaters Dealers

The SME base drum heaters are manufactured in all metal construction and have thermostat control for temperature regulation upto 300 deg. C. The heat loads are purposely kept low to provide even and mild heating. Most of the chemicals. Adhesives require fairly mild heating Standard Base drum heater has approx. 22” diameter over which all types of drums can be kept. Certain materials do require heating from bottom and hence this arrangement is ideal. Catalog No. SME-BDHThermostat Control Supply Cord: 3 meters long

Sensoheat manufactures various types of drum heaters such as clamp on heaters, flexible pad heaters, Semi circular heaters for applications wherein barrel or drum is kept in horizontal position and drum heater covering entire drum.. Sensoheat flexible drum heaters can save time by heating stored viscous fluid to a pourable temperature. The heater is built to be tough, long lasting, and resistant to chemicals. Because few materials stick to its silicone rubber with fiberglass reinforced construction, it is easy to clean. When not in use, it rolls for convenient storage. .

Our organization has experienced tremendous growth in the international market by offering a reliable range of  Electric Drum Heater. These heaters are used to reduce viscosity of different liquids like tar, varnish, resin and grease to fill them in pumps and bottles. Our  Electric Drum Heater is made from best quality MS with proper insulation at our state of the art machining facility. Our precious clients can avail these heaters from us in safe packaging within stipulated time frame. Features: Corrosion resistant Durable service life Less maintenance Wattage: 2.5 – 5.5 kw at 230 V. AC 50/60 Hz Fixing: Design as per client’s requirement also TCO: Open 55°C and close 35°C Provided to control the air temperature through the coil and works automatically TF: Available in variable temperature as per client’s requirements generally required in 115, 170° C Element: Nc – 80 / 20 Frame: M.S. with insulators supporters

The base drum heaters are manufactured in all metal construction and have thermostat control for temperature regulation upto 200 deg. C. The heat loads are purposely kept low to provide even and mild heating most of the chemicals. Adhesives require fairly mild heating Standard Base drum heater has approx. 22” diameter over which all types of drums can be kept. Certain materials do require heating from bottom and hence this arrangement is ideal. Features Completely mobile due to castor wheels Individual temp controller Effective bottom heating Can also be used a pre heating option Application It is generally used as an add on with the vertical drum heater

Drum heaters provide uniform heat and prevents the sensitive material from scorching or degrading. They come with fixed or adjustable thermostat to be used in various applications and also provide freeze protection. Kerone offers a range of Drum Heaters for various applications and usages.

Our company is a nonpareil Manufacturer and Supplier of Clamp on Type Drum Heater. The Clamp on Type Drum Heaters we make available are suitable for applications where short heat up times and high temperatures need to be achieved. Buyers are free to place bulk orders of the Drum Heaters with us us and we ensure their timely execution. Details :Stainless Steel Clamp on heaters are ideal for applications where short heat up times and high temperatures need to be achieved. A low watt density multiform heating element is designed to wrap around the outside of the drum, held on by a stainless steel band with quick release toggle fasteners. Clamp on heaters are lightweight, portable and can be moved from drum to drum with ease. If more heat is required, extra clamp on heaters can easily be fitted.The clamp on heater is ideal for applications where the material or solution to heat cannot come into direct contact with the heating element. This makes them best suited for closed drum situations, e.g. solvent

Our team of experts is capable of entertaining the voluminous orders in shortest time possible. Designed and developed using the premium raw material and modern work methods; we guarantee high quality standards and longevity of our products. Also, we make sure that the raw material is sourced from the trusted places.Applications : Suitable for 55 gallon drums where it is desirable to be able to remove the heater for inspection or inserting into another drum. Standard with Stainless steel 316 sheath material, heater may be used to heat many different types of fluids. Over the Side Heater Easier mixing or pouring with lower viscosity! Fits through 2” or larger bung opening Up to 150°c heat-up with optional auto-cut-off Adjustable SS mounting bracket Unheated stem prevents low-level damage

We make Drum heaters which save time by heating stored viscous fluid to a pourable temperature. The heater Is built to be tough, long lasting, and resistant to chemicals. Because few materials stick to its silicone rubber with fiberglass reinforced construction, it Is easy to clean. When not in use, it rolls for convenient storage. The total wattage (number of heaters) and the material being heated inside of the drum must be considered when determining the actual temperature to which that specific material can be heated. The base heater for drums in the vertical position and is suitable for use with type Ti -129(B&C)drum heaters. The heating power is AC single phase.

We are offering electric drum heater that is used to melt material within the drum that can be extracted or removed. The standard drum size is 200 kg that is fitted with side heaters and bottom heaters. Flp control panel is available separately with the unit and is fitted with the digital control to ensure accurate temperature control. We have drum heater in which entire drum is inserted and semi-solid materials can be liquefied. Our ms electric drum heater is available with separate temperature control panel that can wall-mounted. types flameproof drum heater non-flame proof drum heater features heaters are fabricated flame proof by covering the various heating elements with s.s. Tube insulated with m. G. O. Powder.ptr 100 ohms sensor is available in the sensor for the exact measurements of temperaturestandard 9 k.w. Load is applied to the drum heatertemperature controller ensure that temperature does not shoot up beyond set valueworking temperature of the drum heater is 150°c max..

We are best manufactures for Drum Heaters. Drum Heaters are ideal for heating materials that require sensitive temperature control. Each unit heats and thermostatically controls the air temperature around the sides of the drum. This eliminates many of the problems associated with heaters that come into direct contact with the drum or contents. These heaters are available in a variety of voltages and wattages in both single and three phase

We offer drum heaters. Heated by flexible surface electric heating elements suitable for 45 gallons ( 200 ltrs.) drums. max. Surface temp. 250 oc. rating 1 k.w. ( base heater) 34,000.00 rating 4 k.w. ( vertical heater ) 50,500.00 rating 6 k.w. ( vertical heater ) 72,500.00

This is a convenient and efficient mode to melt nitrotoluence and may other viscous and solidified materials such as Grease & heavy Oils, Phenol, Glucose, Wax, Varnish, Paints, Fats, Tar, Bitumen Asphalt, etc.STT Drum Heaters : They operate in the black heat temperature range and act as thermostatically controlled mobile ovens. Heater drum is uniformly heated avoiding risk of overheating of the contents and damaging heat sensitive materials. The DRUM HEATER is designed to provide maximum heat flux at the bottom. This enables faster and uniform heating. Sectional heating can also be provided when partially filled drums are to be heated. EXTERNAL SURFACE REMAINS AT LOW TEMPERATURE TO ENABLE SAFE HANDLING OF THE HEATER EVEN WITH BARE HANDS. THERE ARE NO HOT SPOTS.THESE DRUMHEATERS CAN ALSO APPLIED IN HAZARDIOUS APPLICATION STT Drum Heater  consists of a cylindrical metal/ PVC cover carrying flexible heating elements. A 2” thick thermal non-conductive material of glass wool provides insulation and the metal/ PVC casing makes for a rugged unit that can be wrapped snugly around the drum. In addition to the simplicity and safety associated with surface heating. STT offers all the advantages of electric heating such as cleanliness, easy control and operating efficiency.

We are offering drum heaters drum heater provide an easy, efficient, clean & economical way for the handling of viscous or low melting point solidified materials in drums. Such materials include asphalt, bitumen, fats, gelatin, glucose, grease, lubricating oils,paints, petroleum jelly, phenols, plastics, sodium tar, vegetable oils, varnishes, waxes etc. drum heaters are mobile ovens heated by flexible surface heaters made from imported nichrome 80/20. They are made in rugged designs and stand normal usage in chemical industries. They can be used for heating the contents of drum kept in the vertical or horizontal positions. The content may either be melted completely and rmoved as a liquid, or they may be melted only at the surface touching the drum walls and removed as a solid block by tilting the drum. the heating in drum heater is gentle and uniform, and there is no chance of local overheating. base heater for drum is also available. technical specification : • inner dimeter : 2 feet • maximum surface temperature : 2500c • capacity : 200 ltr. • type of control : energy regulator or digital contoller • input power : 9 kw • input supply : 440 v three phase ac application : • chemical industry • oil heating • tar heating

For heating viscous materials in standard drums offers flexible electric surface heating pads which can be wrapped on drums to melt the material in the drums. These heating pads are made with nichrome wire and fiberglass cloth Teflon coated fiberglass cloth. heating pads are highly flexible and will have a proper contact with the surface of the drum allowing no air gap. These pads are highly efficient in producing uniform heat to the entire barrel. The element in the heater is insulated with fiberglass yarn and the heater is backed with 40mm thick insulation to avoid the heat losses to atmosphere. On each drum a single pad or multiple pads can be used. Available in different wattages.