Energy Saving Switch Dealers

With the constant and well-organized distribution network, we manufacture and trade an ample range of energy saving smart switch hc-7c. It designed elegantly with all modern specifications as per the client’s requirements. This can be easily wall mounted which are suitable for living rooms, rest rooms, lockers, safe rooms and many morel. Due to its advanced technology it detects the infrared rays released by human body and start the load-light automatically. The light load switch must be operated manually and automatically according to the customer choice. specifications: the daytime to darkness adjustable it detection area is about max. 8 meters perfectly specified voltage range is 230v ac 50hz maximum load voltage of 300w.

• Application: Indoors
• Minimum Order Quantity: 50 Unit
• Dimensions(h x w x d): 80 x 80 x 20.5 mm
• Protection class: II
• Sensor type: Microwave
• Installation: Wall
• Detection angle: 180
• Reach: 1 to 8 m
• Response brightness: 2 - 1000 Lux
• Time setting: 1-255 min.
• IP rating: IP20
• Voltage (Volts): 230V AC 50 Hz

Intelligent street light controller specially designed for energy Saving in conventional street light systems. By using this controller you can save up to 33% energy by staggering the unwanted lights by midnight (Considering 50 % staggering time). Day light power saving scheme can also save some more energy.Apart from energy saving this can also save manpower, operating cost and can reduce manual operating errors. This controller is programmed on longitude & latitude base for the whole year for sunrise and sunset timings.Sunrise and sunset time changes On day to day basis and in one month there is a time change of about 30 minutes. For entire year sunrise and sunset time changes by about 190 minutes.With these much change of time a conventional timer will not serve the purpose. It can save energy up to 8 % against conventional manual operation, Photo sensors or conventional timers. Our controller incorporates a real time clock with in built battery backup for minimum 8 years. There is no need to reprogram the controller even if supply fails for long duration SpecificationsAdvance Microcontroller based design and real-time clock base systems. Real time clock with inbuilt battery with life of more then 8 years Data protection of user parameter by specially RAM which hold the parameters for more then 10 years with out any power Street light ON / OFF on Longitude, Latitude base sunset and sunrise time generation. Controller operates 365 days on real-time based clock with auto calculate sunrise and sunset times as per geographic location. In built auto recovery systems for power failure which helps in streetlight operation. Month wise civil twilight timings (Day light power saving) which helps precise ON / OFF time in all weathers (Advantage of Sunlight before sunrise and Sunlight after sunset). Password Protection. ( As the systems installed at remote location and in open conditions any body can fingered which create problem for street lighting operation) Scrolling display of events which helps to monitoring the systems. Very easy key board operation. Auto / Manual facility by way of relay operation for faster service mode. User settable On Delay up to 99 minutes between R Y & Y B Settable Individual lines Staggering facility to switch OFF and switch ON lights by late night can save energy when there is no traffics. (Can switch off one phase at 10 P.M. and another phase at 1A.M.) Three mode of staggering system 1) Rotation mode in this one phase will off at predetermine time and phase will selected on date basis to equal burning of all lamp. i.e to day R phase off tomorrow y phase OFF and day After tomorrow B phase will be OFF ( 33 % energy saving ) 2) Alternate phase system in which to day R phase off tomorrow Y and B Phase OFF . For equal burning of lamp. ( 50 % energy saving ) 3) Any phase can be switch off at any time and any time can be ON ( Energy saving in range of 33 to 100 % ) Eight Date range programming facility to disable staggering mode for festival and special occasion. Manual stagger off facility for special requirement. Power redundancy for controller even 1 phase 170 VAC controller can work.Technical Specifications Supply : 3 Phase 230 VAC/ph + / - 25 %, R Y B N 4 Wire supply Systems. 50 Hz (+ / - 10 %) Power Consumption : 2 W (Stand by) 5 W (on full load) Controller : 8 Bit micro controller Programming function : Switching on Longitude & Latitude base Real Time Clock : Inbuilt battery, with battery life of more then 8 years Parameter data protection : With special device which hold the data for more then 10 years without any power and Password protected. Display : 16 character and two lines LCD display with backlight. Contacts : 3 Potential free contacts for normal and staggering Redundancy : Operates up to single phase 170 V Ac By pass : Provision to by pass by way of Auto / manual switch Operating Temperature : 2 to 55' centigrade and humidity 90 % non-condensing Advantages No frequent time to be change according to season. Redundant Power supply to controller. Any phase up to 150 Volt controller will work and contactor will be operated up to 170 VAC Real-Time Clock with very high life of more then 5 years. No Battery.

A wide range of Klido Energy Saving Switches is available at the best prices. We stand tall among the leading Importers, Exporters and Suppliers of Klido Energy Saving Switches from India. Made with complete precision, these switches are suitable for normal lighting and connecting air conditioners in establishments. Our Energy Saving Switches come in a variety of color options such as White, Off White, Golden, Silver and Black & Silver to choose from. We hold expertise in fulfilling small as well as bulk orders of Klido Energy Saving Switches with utmost ease.Specification : 220-230 V 30A Can take the load of lighting and Air conditioners in the room 20 seconds delay time, when the card is taken off LED indicator of ESS in darkness Available in Bright white, Silver, Gold and black

• Country of Origin: India
• Type: Energy Saving Switch
• Material: Plastic
• Color: White
• Condition: New

Quick Sense Timer switch (Qs-T1) PRODUCT INSTALLATION: 1. Press the program button and release. The first on setting can be made now 2. Press the week button to set the day or blocks of days. Set the time by pressing the hour button and then the min button. 3. Press the prog button again to finish the first on set and enter into the first offsetting. By repeating 2 to make the first offsetting. 4. Press the prog button again to finish the first offsetting and enter into the 2 on set. Repeat 2 and 3 to program the remaining settings. 5. After completing the setting, press the clock button and the timer is ready to operate.  

• Type: Light Sensor
• Material: Plastic
• Application: Automobile Use
• Color: White
• Condition: New
• Power: 0.45W
• Alarm Range: 12mtr.
• Country of Origin: India
• Brand Name: Shoptron
• Beam Angle(°): 180
• IP Rating: 65
• Light Source: Led
• Color: White
• Product Name: Infrared Motion Sensor
• Usage: Indoor, Outdoor

• Rated Voltage: 230 V AC 50 Hz
• Load Wattage: Max. 300 W incandescent bulb or Max. 150 W fluorescent lamp
• Detection Area: Max. 8 meters
• Detection Angle: Max. 90º
• Time-delay: From 10±5 seconds to 4±1 minutes adjustable
• LUX Control Level: From daytime to darkness adjustable
• Protection Class: IP 20

These Energy Saving Smart Switches can detect the infrared Rays released by human body motion within the Detection area and then start the load-light automatically. This unit is designed to use with Incandescent light (indoor use only). With this switch, light-load can be operated manually as well as automatically as per your requirement. It has a normal switch, which is special in the PIR Sensor. Some customers want to make the lamp always on or off can achieved by this switch. The HC - 7C is better for indoor use, such as living room and restroom and so on.Applications: Living rooms / Rest rooms Toilets / Stores Lockers / Safe rooms And many more

• Application: Home , Office
• Material: Plastic
• Phase: Single
• Voltage: 120 - 180 AC
• Size: 85 *85 * 42mm
• Maximum Power: 6000 W
• Delay Time: 8 - 15 Seconds
• Mechanical Life: 15 Years

Energy Saving Switch, Electric Mini Kettle, Pre Rinse Unit Deck Mounted

While purchasing the product from us, you can choose to make payment through any mode. Our personnel will assist you to pay for your purchases conveniently. Our well-maintained and capacious warehouse helps us in managing systematically arrangement of goods and meeting massive requirements of the clients at a time. We have become a known firm engaged in the provision of premium quality Energy Saving Switches. These switches are manufactured in accordance to industrial quality guidelines by using raw materials of premium quality. These switches are used to save energy and electricity. These are an excellent alternative to the conventional switches because of their potential to drastically reduce the electricity bill.   Feature : Energy-efficient Reduces electricity bill Easy to install Long service life

• Color: White
• Usage/Application: Home, Office, Hotels, Apartments
• Power: 40 A
• Phase: Single
• Voltage: 240V
• Brand Name: Ovlox India

The amazing sensors automatically turn on lights when they detect a presence and conversely turn them off according to the pre set time. It also has an inbuilt brightness (Lux) controller for day and night setting. All our sensor switch products are tried and tested by many satisfied home, institutional & corporate users in India.                   “SO  BUY THIS WITH CONFIDENCE”   This lighting switching system has created a revolution in home and office lighting automation area.Motion sensor  is able to detect infrared rays emitted by human body … Our  Motion Sensors are sensitive to the temperature of the human body and are able to detect the presence of a human being in a room.     Just install this smart PIR sensor in your home or office   Godown, parking area, hall store backyard,  street light or   staircase and watch your electricity bills reducing.    SPECIFICATIONS: Auto switching of lights/Fans or other fixtures based on human occupancy in residential and commercial buildings. Operating voltage range: AC 220V – 50 Hz Quiescent Current:

• Model: Ts-PROG
• Voltage: 180V
• Current: Max 30A
• Colour: White

• Color: WHITE
• Usage/Application: Energy saving switch
• Power: AC220V, AC110V
• Phase: Single
• Voltage: 220V
• Brand Name: ESSL
• Energy Consumption: 22W POWER CONSUMPTION

• Max. Current: 220 V DC
• Circuit Type: 1 Way
• Number of Module: 1 Module
• No. of Module: 2M
• Color: Mid Grey
• Current Rating: 5A
• Application: Hotels
• Phase: Single
• Energy Consumption: <20mW
• Power: AC Current
• Voltage: 220V

• Application: energy saving switch in hotel, motel, hospital and guest house
• Color: White
• Material: ABS
• Voltage: 220V input
• Brand Name: TECH 24
• Energy Consumption: 30A
• Model Number: CLK-1004-IIS

* Power Supply: Insert card into the switch to make the power supplying ,when guest enter the room.* 5-10 seconds after taking out the card from the energy saving switch.* Adopt transformer to make the energy saving switch long life.* Cover adopt anti-fire ABS material, which means high secure ability.  

• Material: Plastic
• Country of Origin: Made in India
• Usage/Application: Hotel, Resorts, Guest House, etc.
• Power: 6000W
• Phase: Single
• Voltage: 280V AC
• Brand Name: TES
• Model Name/Number: TES-SW01G
• Size: 85x85x42 mm
• Delay Time: 8 sec
• Maximum Current: 40A
• Mechanical Life: 15 years

ICIR-750 is a state-of-the-art energy saving auto-switch with different types of control functions for different applications. This light control sensor switch can be mounted with the single switch box with 60mm screw pitch. By utilizing IR-TEC\'s patented power supply technology, Solo series are able to activate various kinds of lights with only 2-wire connection, exactly the same as the traditional wall switches.        Features:   Single switch box recess mount Temperature compensation Super wide angle detection Superior RFI/EMI immunity 1 minute fixed delay time Full time control (no ambient light sensor) Specifications:  Power supply: 230VAC   Maximum load: 1.50A             Delay time: 1 min Infrared sensor: Dual element, Low noise DetectionRange: 140° wide, 10m @ 25°C Detection speed: 0.15~3 m/sec. Mounting height: 1~1.4 m Op. temperature: -20°C~50°C (-4°F~122°F) Dimensions (mm): 80 x 80 x 50mm

Energy Saving Smart Switch, Morpho Aadhar Kit

Energy Saving Smart Switch, Pir Motion Sensor

Energy Saving Switch, Time Office Z100 Fingerprint Attendance System

Energy Saving Switch, Panic Button, miniature toggle switches, push switch

Energy Saving Switch, hotel mini bar fridge, Portable Car Fridge, key tags

Energy Saving Switch, Rfid Hotel Locks, DND ELECTRONICS DOOR PLATES

Energy Saving Switch, Mounting Option Switch

Energy Saving Switch

Energy Saving Switch, Remote Managed Service, Biometric Exit Reader

Energy Saving Switch, Electronic Card Swipe Locks