Environmental Testing Services

• ISO 17020 Accredited Inspection Agency: ISO 17025 Accredited Testing Laboratory

CIL provides 'Ingress Protection Testing' services in Patna. IP65 Testing, IP67 Testing, IP55 Testing, etc. Here are the standard ratings for ingress by foreign objects and dust how to interpret them:  IP0X: This rating indicates the item is not protected at all against ingress from foreign objects.  IP1X: This rating stipulates the item is protected against access from the back of a hand and solid foreign objects that are greater than 50 mm (about 2 inches). IP2X: This rating indicates that any hazardous parts cannot be accessed by a finger or solid objects greater than 12.5 mm (about half an inch). This is tested using a “jointed finger” that is 12 mm to 80 mm long.  IP3X: This rating is given for items in which hazardous parts cannot be accessed using a tool, such as a screwdriver, or by solid foreign objects greater than 2.5 mm (about one-tenth of an inch). This is verified using a 2.5 mm access probe, which cannot penetrate the item.  IP4X: This rating applies to items in which hazardous parts cannot be accessed even with a wire, or foreign objects greater than 1.0 mm. This is tested using a 1.0 mm access probe and by inspection to ensure any dust that enters would not interfere with the part’s functionality.  IP5X: This rating applies to hazardous parts that can’t be accessed, even with a wire, and protection against ingress from dust is also applicable. This is tested using a 1.0 mm access probe and by inspection to ensure any dust that enters would not interfere with the part’s functionality.  IP6X: There can be no ingress of dust at all for this rating. Otherwise, it is similar to IP5X with the exception that the item is completely sealed off from dust.    Next, here are the ratings for ingress by liquids:  IPX0: This rating indicates the item is not protected at all against ingress by liquids.  IPX1: This rating illustrates the item is protected against vertically-falling liquid drops, meaning any that fall on the item will have no harmful effect.  IPX2: This rating extends IPX1 by ensuring protection against falling liquid drops at an angle up to 15 degrees.  IPX3: This rating is given when an item is safe from ingress from spraying liquid. This is tested by spraying water at an angle up to 60 degrees of vertical and establishing that no harm came from this. The spray can come in an oscillating pattern with a flow rate that depends on the item tested.  IPX4: This rating extends IPX3 to include protection against ingress from splashing liquids. It is tested by establishing that splashed water has no harmful effect on the item.  IPX5: This rating applies to items that are protected against ingress from jets of liquid. It is given after testing with water jets, and it shows there were no harmful effects.  IPX6: This rating is given for items that can provide protection against ingress from powerful jets of liquid. It’s an extended version of IPX5. The water pressure in this test can reach 14.5 pounds per square inch (PSI).  IPX7: This rating goes further and indicates protection from temporary immersion in liquids. The rating is given after immersing an item in 1 meter of water for 30 minutes with no harmful effects.  IPX8: This rating extends the IPX7 rating for water immersion to a greater depth and longer periods of time. The conditions of the water immersion are agreed upon between the manufacturer and the testing facility. The specifications have to be marked plainly on the product.  These ratings are established in an ANSI test standard called IEC 60529. Some rating systems extend the second number to a possible 9, which indicates protection from steam-jet cleaning.  Testing is verified in each case by a testing engineer, whose job it is to inspect the tested item immediately after the test is completed to determine the result. It’s very important that the test engineer be well-trained and knowledgeable in conducting the test and reporting the results. 

• Mode of Report: hard Copy, Soft Copy
• Service Mode: Offline
• Duration: 1-2 Days
• Location: PAN India

What is the significance of a testing environment testing service? You can have an excellent test case specification while also being a highly experienced testing engineer. However, to fully use the power of your test cases and testing engineer, a well-designed test environment is essential.   A test environment gives precise feedback on the quality and behaviour of the programme being tested. A test environment, in other words, provides you with the appropriate configuration to perform your test cases.   A test environment also assists you by providing a dedicated environment in which you may isolate the code and evaluate the application’s behaviour. This assures that no other actions on the server are influencing the results of the testing.

Our Competency Automotive Testing & Validation Services deliver expert assessments to ensure vehicles meet performance, safety, and regulatory standards. We specialize in rigorous testing for durability, fuel efficiency, emissions, and safety systems, employing advanced technology and methodologies. Our services offer precise data analysis and validation, supporting design optimization, reliability enhancement, and regulatory compliance. With a focus on quality and thoroughness, we help you achieve high standards and informed decision-making in vehicle development.   SR industries is company supplying test instrumentation and services in the area of Vehicle testing.  We are able to provide end to end solutions for Road Load data acquisition.  Vehicle Ride & handling measurement.  ABS test.  Duty cycle measurement.  Benchmark activities.  Field testing/monitoring.  Vehicle performance testing    We provide complete solution in this field including supply of Sensors, Conditioning systems, Data acquisition systems & software for data analysis & report generation.    We develop and supply customized software for all the above tests. 

ENVI ECOTECH SERVICES PRIVATE LIMITED. is specialized in offering Analytical Laboratory Services. We have advanced Analytical Laboratory for performance different types of Analytical Testing.   Analytical Laboratory Division The Analytical Laboratory Division of ENVI ECOTECH SERVICES PRIVATE LIMITED.. Faridabad -121004, is accredited from NABL (Deptt. of Science & Technology, Govt. of India). Accreditation Certificate Number s T-3478 for Chemical Testing. Environmental Lab Testing Services The Environmental Testing is a process that is performed to characterize and monitor the quality of Environmental Parameters Ecotech Laboratory has been providing the quality analytical services since 2008.  We offer a wide array of Analytical Laboratory Services to support environmental investigations focused on Environmental Chemistry, Fuel and Chemical Testing.   Water and Wastewater Quality Monitoring and Analysis Ground Water Quality as per IS: 10500 : 2012 Surface Water Quality as IS: 3025 Process Effluent Quality as per IS: 3025 and CPCB â�� EPA Act-1986. Drinking Water / Mineral Water Quality as per BIS Specification. Construction Water as per IS: 456 :2000 DM Water / Cooling Water and Boiler Feed Water. Water Audit as per guideline of SPCB/CPCB and EMS. Disinfection of Drinking water as per IS: 10500 : 2012 AMBIENT Air / INDOOR AIR AND STACK Emission Monitoring and Testing. Ambient Air Quality Monitoring as per IS: 5182 & NAAQMS-2009. Stack Emission for Boiler, D.G. Sets, Furnace and Paint Booth Stack Emission as per Guideline of CPCB / EPA-1986 and IS: 11255. Indoor Air Quality Monitoring as per Factory Act -1948 and Amendments ,ISO: 14001 | OHSAS : 18001 Total  Dust Level Concentration Personal Exposure. Work Place Air Monitoring. Shop Floor Environmental Monitoring. IIIuminance Light Level Measurements. (LUX Monitoring). Noise  Level Monitoring ( dB (A) and Leq â�� Values) Meteorological Data Wind Speed Wind Direction Temperature Relative Humidity Cloud cover Hazardous waste (SLUDGE ) and soil TESTING. Soil Testing (Physical and Chemical) as per IS: 2720 & SMCA. Toxic Metals Organic and Inorganic Matter. Other relative test parameters. Fuel and Chemical Testing Diesel Fuel Oil (HSD/LSD) Furnace Oil Lubrication Oil, Bitumen / Coal / Pet-Coke Soda Ash (Na2 Co3) / Salt (NaCl) and Lime Acetic Acid / Acid ( H2 So4 and HCL) Bleaching Powder