Flow Control Valves Dealers

• Country of Origin: India
• Size: 1.1/2inch, 1.1/4inch, 1/2inch
• Material: Stainless Steel
• Feature: Blow-Out-Proof, Casting Approved, Durable, Investment Casting
• Brand Name: Jindal
• Body Style: Globe Type

The flow control valve fittings are used to reduce the actual flow rate in a definite section of a pneumatic circuit. This serves to decrease the actuator speed of the system. While a needle valve controls the flow in two directions, a flow control valve fitting is used to direct the system flow in only one direction. This way, free flow of the gas or liquid is allowed in the opposite direction.The system has a critical need for the flow stream to reach the right place at the suitable time. The actual control of the flow and pressure, to direct the energy transfer within the system, is of secondary importance. The secondary function of the directional valves and fittings, ensure the proper timing of the cyclic events.

• Material: Metal, Stainless Steel
• Number Of Way: 2way
• Application: Water Fitting
• Pattern: Plain
• Pressure: High Pressure, Low Pressure, Medium Pressure
• Feature: Investment Casting, Non Breakable

Designs available in 5 LPM @0.5bar pressure, 10LPM and 15LPM. Made from SS Extrusions (Machined) and not from castings, hence reducing the chances of manufacturing defects like blow holes and shrinkage. Can be manufactured from SS 316/55 304/55 202 based on project technical specification CNC machined for better dirnensional accuracy resulting in precise output flow Fully automatic working, hence no manual flow adjustment required. Output flow has a saturation knit; hence water loss due to installation of suction pumps is prevented. Single body design prevents unnecessary fiddling and reduces water losses as in case of conventional brass ferrule. In built NRV (Non return valve) hence only unidirectional flow allowed. FCV is designed to withstand high line pressures. Zero maintenance. Factory calibrated design hence, once installed immediately ready to use. FCRI Tested for output flow calibration for given line pressure. 

• Country of Origin: India
• Size: 1.1/2inch, 1.1/4inch, 1/2inch
• Material: Metal
• Certification: ISO 9001:2008 Certified
• Feature: Blow-Out-Proof, Casting Approved, Durable, Investment Casting
• Brand Name: Janatics
• Pattern: Plain

• Weight: 5Kg, 10kg, 15kg
• Packaging Type: Wooden Box, Carton, Pallets
• Valve Size: 1inch, 1/2inch, 1.1/2inch, 1.1/4inch
• Voltage Range: 24 V AC, 24V DC
• Diameter (mm): 50mm, 60mm
• Overall Length: 6-10 Inch, 20-30 Inch
• Specialities: Non Breakable, Investment Casting, Heat Resistance, Casting Approved
• Diametre (milimetre): 100 To 1000 Mm

We use high-quality brass to manufacture our Flow Control Valves, which can work under the pressure of 1.0-1.6Mps.  The Control Valves are rated with the average flow rate of 200 l/m.

• Country of Origin: India
• Material: Stainless Steel
• Number Of Way: 3way
• Media: Water
• Type: Industrial Valves
• Application: Water Fitting
• Specialities: Non Breakable, Investment Casting, Heat Resistance, Durable, Casting Approved, Blow-Out-Proof

A control valve is a valve used to control fluid flow by varying the size of the flow passage as directed by a signal from a controller.This enables the direct control of flow rate and the consequential control of process quantities such as pressure, temperature, and liquid level. In automatic control terminology, a control valve is termed a "final control element".

• Max. Operating Pressure: 160 Kgf/cm2
• Rated Flow Valve: 130 L/min
• Min. Required Pilot Pressure: 15 Kgf/cm2
• Max. Drain Line Back Pressure: 1 Kgf/cm2

High Response Type Proportional Electro-Hydraulic Directional and Flow Control valves   This valve pursues the ultimate performance of proportional electrohydraulic directional & flow control valves and make themselves to have high response feature. The closed loop is composed in the valve inside by combination of a differential transformer (LVDT) and a power amplifier. Thus, high accuracy and reliability are provided. In addition to control in the open loop, this can be used for the closed loop system as a simplified servo valve.

As we follow the automated warehousing system, we ensure safe assembling as well as storage of the entire lot. Moreover, the system is well managed by our team of experts. Our payment procedures are well documented, legal, and safe. We provide our clients with numerous online and offline options for making purchases and make sure they are protected.

Flow Control Valves that we offer regulate the flow or pressure of a fluid. Flow Control Valves, offered by us, normally respond to signals generated by independent devices such as flow meters or temperature gauges. Our Flow Control Valves are normally fitted with actuators and positioners. Pneumatically-actuated globe valves and diaphragm valves are widely used for control purposes in many industries, although quarter-turn types such as (modified) ball, gate and butterfly valves are also used.Flow Control Valves, offered by us, can also work with hydraulic actuators (also known as hydraulic pilots). These types of valves are also known as Automatic Control Valves. The hydraulic actuators will respond to changes of pressure or flow and will open/close the valve. Automatic Control Valves do not require an external power source, meaning that the fluid pressure is enough to open and close the valve. Automatic control valves include: pressure reducing valves, flow control valves, back-pressure sustaining valves, altitude valves, and relief valves. An altitude valve controls the level of a tank. The altitude valve will remain open while the tank is not full and it will close when the tanks reaches its maximum level. The opening and closing of the valve requires no external power source (electric, pneumatic, or man power), it is done automatically, hence its name.Process plants consist of hundreds, or even thousands, of control loops all networked together to produce a product to be offered for sale. Each of these control loops is designed to keep some important process variable such as pressure, flow, level, temperature, etc. within a required operating range to ensure the quality of the end product. Each of these loops receives and internally creates disturbances that detrimentally affect the process variable, and interaction from other loops in the network provides disturbances that influence the process variable. To reduce the effect of these load disturbances, sensors and transmitters collect information about the process variable and its relationship to some desired set point. A controller, then processes this information and decides what must be done to get the process variable back to where it should be after a load disturbance occurs. When all the measuring, comparing, and calculating are done, some type of final control element must implement the strategy selected by the controller. The most common final control element in the process control industries is the Flow Control Valve. Flow Control Valves manipulate a flowing fluid, such as gas, steam, water, or chemical compounds, to compensate for the load disturbance and keep the regulated process variable as close as possible to the desired set point.

• Material: SS 304
• Packaging Type: Packet
• Valve Size: 3/4 Inch
• Condition: New
• Specialities: Durable
• Type: Flow Control Valves

• Material: Stainless Steel
• Brand Name: TOKYO KEIKI
• Application: Industrial
• Type: Flow Control Valve
• Model Name/Number: FN1/FN4/FNG
• Power: Hydraulic
• I Deal In: New Only

• Material: Aluminium
• Media: Air
• Working Pressure: 10 Bar
• Diameter: 12mm
• Application: Regulate the Flow Rate of Compressed Air

We make available Flow Control Valves which are manufactured using Aluminium, Brass, and stainless steel. The Flow Control Valves are available in 25mm to 100mm size range. Our Flow Control Valves have maximum flow rate up to 650 l/m.

• Country of Origin: India
• Application: INDUSTRIAL
• Color: Grey
• Warranty: 1yr
• Type: Cooling Tower Flow Control Valves
• Condition: New

A cooling tower flow control valve is a device that is used to regulate the flow of water in a cooling tower system. The valve is installed in the water supply line that feeds the cooling tower, and its primary function is to maintain a consistent flow rate through the tower.   The valve is typically controlled by a controller or a control system that monitors the flow rate and adjusts the valve position to maintain the desired flow rate. This helps to ensure that the tower operates at peak efficiency and provides the necessary cooling for the process or equipment that it is serving.   There are different types of cooling tower flow control valves available, including globe valves, ball valves, and butterfly valves. The choice of valve depends on various factors such as the application, flow rate, pressure, and temperature requirements.   Proper maintenance of the cooling tower flow control valve is essential to ensure its reliable and efficient operation. This includes regular inspection, cleaning, lubrication, and replacement of any worn or damaged components.