Cylinder Auto Changeover System
90,000 Per piece
For uninterrupted supply of gases into a system through manifold, manual change-over system or auto change over-system are being used. CHEMIX design manifolds with both manual and auto change-over system as per the requirement of particular service, no of cylinders, output pressure and considering the safety in handling.
Cornsil Schlenk Line Setup
Get Price Quote
50 pcs (MOQ)
We deal in Schlenk Line Setup is specially designed chemistry apparatus that features various ports. From more than two decades, we are functioning as Schlenk Line Setup Manufacturer, Exporter and Supplier from Pondicherry, India. We have a team of experts to precisely design the Schlenk Line Setup, keeping in mind the danger involved in its use. Schlenk Line Setup can be purchased at reasonable price from us. Details : The Schlenk line (also vacuum gas manifold) is a commonly used chemistry apparatus developed by Wilhelm Schlenk. It consists of a dual manifold with several ports. One manifold is connected to a source of purified inert gas, while the other is connected to a high-vacuum pump. The inert gas line is vented through an oil bubbler, while solvent vapors and gaseous reaction products are prevented from contaminating the vacuum pump through a liquid nitrogen or dry ice/acetone cold trap. Special stopcocks or Teflon taps allow for vacuum or inert gas to be selected without the need for placing the sample on a separate line. Schlenk lines are useful for safely and successfully manipulating air sensitive compounds. The high vacuum is also often used to remove the last traces of solvent from a sample. Vacuum gas manifolds often have many ports and lines, and with care it is possible for several reactions or operations to be run simultaneously.
Best Deals from Gas Manifolds
Gas Manifold System
17,500 Per Piece
5 Piece (MOQ)
Backed by rich industry experience, we are highly engaged in offering an optimum quality range of Gas Manifold. Owing to its flawless finish and durable features, our offered manifold is highly demanded among our precious clients. In synchronization with the set industry standards, the provided manifold is well designed and manufactured by our skilled professionals using premium grade raw material and superior technology. Furthermore, our clients can avail this manifold at industry leading price.
AUTOMATIC CHANGEOVER MANIFOLD
Get Price Quote
1 piece (MOQ)
Auto Gas Changeover
20,000 - 55,000 Per Set
1 Set(s) (MOQ)
Range AUTO GAS CHANGE-OVER (SEMI / FULLY AUTO) AUTO GAS CHANGE OVER-MECHANICAL (LEVER TYPE) AUTO GAS CHANGE OVER-MECHANICAL (PANEL TYPE) TWO CYLINDERS ATTACHMENT
Gas Manifold Header
20,000 Per Piece
1 Piece (MOQ)
Manifolds are used to connect two or more high pressure cylinders together for higher flow rates or for higher storage capacity. The manifolds could be arranged in a single row or in cases where space is a constraint, could be arranged facing each other. In most cases, to ensure zero downtime, at a time only cylinders in one of the rows are used. When gas in this row is depleted, the gas in the other row is used and cylinders in the earlier row are sent for refilling. The manifold system could be made of brass or SS. See below the CAD layout of a 6 x 6 manifold system. The cylinders are connected using flexible hose to the manifold block valve mounted on the manifold block. The manifold blocks on one arm of the system are connected by a header pipe. The pressure on manifold arm is indicated by the pressure gauge. The manifold arm is connected to the pressure regulator through a non-return valve and a needle valve. The drawing on the right illustrates the connection details of the manifold valve and the pressure gauge on the manifold. S.S BLOCK WITH ISI BRASS CYLINDER VALVE S.S SEAMLESS MAIN LINE PIPE TAFLON STEEL BRAIDED HIGH PRESSURE PIGTAILS M.S CHANNEL FOR MOUNTING MANIFOLD MORE AS PER CUSTOMERS REQUIREMENTS
Gas Cylinder Manifold
Get Price Quote
Gas manifolds allow uninterrupted gas supply. Our gas manifolds are designed in such a way that they let you connect and disconnect multiple cylinders of industrial gases with ease and in a safe and cost-effective manner. The pressure in a gas container, cylinder or bundle is controlled by a gas manifold. Typically, a manifold consists of a supply unit and a backup unit. At a basic level, the entire gas manifold system consists of : A source Vaporizer Pipelines Pressure regulators Manual and service shut-off valves Pressure release valves Pressure monitors and alarms. Benefits of a gas manifold : Streamlines the handling of gas cylinders Reduced transport costs Reduced cylinder lease costs Reduces the need for space Makes gas cylinders easier to handle in the event of an emergency. Gas manifolds are either manual or fully/semi-automated, with an alarm function to give a warning when gas is running out are also available. Gas pipes are usually constructed from materials selected on the basis of the application and features of the gas in question. Pipe system classifications are based on the following factors : Hazardousness of the chemical Form of the chemical (gas/liquid) Nominal pipe size (DN) Maximum working pressure (PS) From the gas pipe networks, the gas is accessed at the end-use location via an outlet connection where the gas pressure and flow rate are controlled. The outlet units consist of a shutoff valve, pressure regulator, a possible flow meter and a hose connector. We can supply these gas manifold units as a whole. We can also supply various individual components of the unit like hose pipes, valves, regulators etc.
Gas Manifold
65,000 Per Pack
1 Pack(s) (MOQ)
Relying on our expertise in this domain, we are into offering Gas Manifold System.Features: Compact design Fine quality Low maintenance
4 Stage Gas ManIfold
19,000 Per Piece
1 Piece (MOQ)
Oxygen Gas Filling Manifold
Get Price Quote
Our material handling procedure is very well managed by a team of experts and thus we ensure zero damage of the stored products stocked in our capacious warehousing unit. Our organization is renowned among reputed suppliers of premium and superior grade Gas Manifold across the nation. Product Details: Simple to use Long lasting Exact dimensions Seamless finish High strength Light in weight
LPG Gas Manifold
Get Price Quote
Gas Manifold System
2,175 - 5,500 Per Piece
1 Sets (MOQ)
Emergency Gas Manifold
3,500 - 150,000 Per Piece
Oxygen Gas Filling Manifold
Get Price Quote
1 Unit (MOQ)
Chlorine Gas Manifold
Get Price Quote
The manifold is constructed out of ASTM A 106 Gr. B 20 NB seam-less carbon steel pipe with forged fittings and flanges of ASTMA grade. The manifold is supported on an angle iron which is firmly grouted to the floor. The manifold is fitted with manifold valves which are as per IS 3224. The manifold valves are used to connect the tonner in use or isolate the tonners which are not in use. The manifold is also provided with a pressure gauge with an isolating valve.
CO2 Manifold System
Get Price Quote
CO2 manifold system enables a consumer to draw CO2 gas at a single point and avoids mishandling of CO2 cylinders at different locations at the shop floor. This battery system for using the cylinders at one point eliminates the carriage of individual cylinders at different locations where MIG welding sets/user/water dosing systems are located. With our Pressure Reduction Station the pressure of the gas is reduced at the battery itself so that low-pressure gas (as required by the user) is sent through the pipeline. With proper instrumentation and inter-locking, a safe system is designed for trouble free service. The system consists of minimum two links whereas one is connected with the outlet and other with inlet.CO2 is transported in liquid phase either in cylinders or in storage tankers but it is used in gaseous state in beverages and other uses. CO2 is evaporated and expanded to lower pressure, in this expansion operation cooling occurs which can choke the entire system, resulting in pressure oscillation and CO2 losses can take place. SSGLA system avoids all such problems. The main equipment out of this is the SSGLA Filter cum SCRS system, with which we can achieve the following advantages. No internal freezing. No pressure oscillation. Clean CO2 as the impurities get filtered off. No interruption in CO2 supply during cylinder change. Saving of energy, CO2 and time are the main advantage. No outside heater/steam required. Neat and clean system which leads to near surroundings. No full time operator required. Our system makes it possible to supply gaseous CO2 at any desired outlet pressure.
Gas Manifolds
Get Price Quote
We offer qualitative gas manifolds that are used to connect two or more high pressure cylinders together to achieve high flow rates or extra storage capacity. The products may be arranged in different configurations depending on flor space availability.
Gas Manifold System
Get Price Quote
We are a well-known organization engaged in manufacturing and supplying a quality range of Gas Manifold System for Oxygen & Nitrogen. We are offering Oxygen Gas Manifold System, Nitrogen Gas Manifold System, CO2 Gas Manifold System and LPG Gas Manifold System as our range of Gas Manifold System. These Gas Manifold Systemare highly functional, and are known for their durability. We offer Gas Manifold System in safe packaging at competitive prices.
Gas Manifolds
1,430 Per Piece
1 Piece (MOQ)
Offer on the product: Free Shipment on bulk purchase Contract Manufacturing service Discount Pricing on volume purchase
Auto Changeover Manifold
Get Price Quote
Gas Manifold
Get Price Quote
We believe in transparency when it comes to payment of advance or full cost. We provide our patrons with numerous payment options for their convenience and ensure the methods are safe. Based is Belgaum(India), we are entrusted with the chore of providing top-notch products in the domestic market.
Gas Manifold Systems
Get Price Quote
We are offering gas manifold systems. We are an established name amidst the trusted gas manifold systems manufacturers, exporters & suppliers. The gas manifold systems are manufactured by us using latest technologies for meeting various application-specific needs. Available with latest features, the gas manifold systems offer dependable performance with less maintenance needs, making them total value for money systems. We can offer many types of gas manifold systems as mentioned below : gas generators (hydrogen, zero air, nitrogen) gas purification panel ultrasonic bath hplc column washing pump nitrogen concentratorevaporator digital gas flow meter hplc columns hydraulic press ultrasonic bath with chiller air compressor vacuum pump recirculating water chillers uv spectrometer
Medical Gas Manifold System
Get Price Quote
Genesys™ medical gas manifold systems lead the industry in reliability and innovative features: transducers instead of pressure switches, 400 psig pressure differential rated solenoid valve(s), easy to service 2D layouts and union fittings before and after all serviceable components. In addition they are designed to allow the medical gas manifold cabinet to be converted in the field (i.e.- from standard flow to high flow or from cylinder by cylinder use to liquid by cylinder or liquid by liquid). These design features: improve safety, reduce manifold system costs, make the units easy to service and provide the utmost in reliability Adjustable single stage line regulator 0 – 125 and 0 – 200 psig Flexible stainless braided pigtails (except Oxygen service – rigid copper pigtails provided per NFPA 99) CGA gas specific pigtail connections Complete system cleaned for use with Oxygen Cylinder contents gauge and delivery pressure gauge included Outlet connection – 1/4 Male NPT Wall mounting bracket included Maximum inlet pressure 3,000 psig Optional remote audio visual alarm Five year warranty
Gas Cylinder Manifolds
Get Price Quote
one Set(s) (MOQ)
we are offering gas cylinder manifolds. gas cylinder manifolds are used for filling as well as discharge of gas into and from cylinders to machines
Medical Gas Manifold System
Get Price Quote
We are counted amidst the well-known names involved in providing quality products from Karnataka(India). Staffed with a pool of deft professionals, we are capable to deliver high quality lot to the patrons. And, we also make sure that the products are packed using the best quality material.
LPG Gas Manifold System
Get Price Quote
With support of our excellent team workers, we have been delivering the best quality range of LPG Gas Manifold. The offered manifold is connected to one or more cylinder to common gas supply. It is designed by our trained professionals using finest grade metal and contemporary techniques in compliance with set industry standards. Our offered manifold is made available in number of specifications for our clients to choose from. Features : Anti corrosive Sturdy construction Heat resistance
Automatic Manifold System
Get Price Quote
1 Piece (MOQ)
Automatic Manifold system provides continuous gas flow.Unissi offers Fully automatic control panel as well as Semi-automatic control panel.The control panel comes with Analog / Digital display to display the pressure of each incoming bank (Right or Left) and mainline gas pressure.As soon as the gas in one bank runs below the set pressure the control panel it sounds an alarm. The fully automatic control panel switches the bank automatically whereas it is manually changes in case of Semi-Automatic control Panel.The Display includes LED lights to indicate working conditions and alarms.The panel comes with Modbus interface for BMS connectivity.
Automatic Gas Changeover Manifold System
20,000 Per Piece
Gas Manifold
Get Price Quote
We are engaged in fulfilling the requirement of Gas Manifold by various industries. Our Gas Manifold has garnered widespread acclaim for its sturdy construction and efficient performance. We package the Gas Manifold in durable material so that there is no risk of damage during transit throughout country. That is why we are a celebrated Manufacturer and Supplier of Gas Manifold from Mumbai, Maharashtra.
Gas Manifold System
1 - 100,000 Per Bag
1 Nos (MOQ)
Gas Mainifold
Post Free Ad
