ggbs powder
2,200 - 2,300 Per Ton
500 Ton (MOQ)
Ground Granulated Blast Furnace Slag
Get Price Quote
1 Ton (MOQ)
What is GGBS? Ground Granulated Blast Furnace Slag is a waste product of the steel industry that can be upcycled in cement to increase the strength and durability of concrete. A by-product of the steel-making industry, Ground Granulated Blast Furnace Slag (GGBFS) is produced by the rapid cooling of iron ore slag. Application of GGBS: GGBS is used to make durable concrete structures in Combination with ordinary Portland cement and/or other pozzolanic materials. The application of GGBFS is mainly as a clinker substitution in blended slag and normal cement production, and as a supplementary cementitious material in ready-mixed and site-batched concrete production
Best Deals from Granulated Slag
granulated blast furnace slag
Get Price Quote
Granulated Blast Furnace Slag or GBFS is formed when Blast Furnace Slag or BFS is successively at a fast rate quenched from the furnace rather than left for cooling. It has a density of about 60% to 70% that of natural sand. This material has a much increased resistance to sulfate attack. This eventually leads to better performance in countering acids of any type. In GBFS, no type of reaction related to alkali and silica occurs. Also the material provides a huge saving in connection to carbon dioxide emission which is an extra boon. What constitutes GBFS are its properties that consist of durability, appearance, higher ultimate strength than concrete which is made up of Portland cement and high sustainability level of the product made out of this material. Type of Production process at Royal Mineral The composition of the slag varies as per the impurities that are present and also on the composition of the raw materials through which the product has to be extracted. So first of all, the molten Blast furnace slag or BFS is separated from molten iron. Then the slag is made to run into or transported to ground area for air-cooling purposes. Here it solidifies and converts into a rock. The rock is called crystalline Blast furnace slag. Now the quenching of molded slag is done rapidly by passing it through high pressure trough and then consequently into high pressure sprays of water. This procedure eventually causes the molten slag to overheat and this leads into its explosion. This explosion that occurs forms what we know as Granulated Blast Furnace Slag or GBFS. This is then stocked in piles where it is dewatered and collected with conventional front-end loaders.
Ground Granulated Blast Furnace Slag (GGBS)
2,800 - 3,000 Per Metric Ton
100 Ton (MOQ)
GGBS can be used to replace cement in any product as below where cement (OPC) ise used Fly Ash Bricks Pavor BLock/Kerb Stone/Divider AAC Block RMC Precast Concrete Slabs General Construction
Ground Granulated Blast Furnace Slag
Get Price Quote
20 Ton (MOQ)
granulated blast furnace slag
Get Price Quote
100 Kilogram (MOQ)
We are engaged in offering the 100% compliant Granulated Blast Furnace Slag (GBFS) to the global market. We are associated with the league of #1 Manufacturers, Exporters, and Suppliers of Granulated Blast Furnace Slag from Gujarat, India. We end up with the best grade slag during the steel-making process. The slag, we offer, does not contain any metallic item, but consist of glass containing silicates and alumino silicates of lime. Â Features : Is extracted from steel-making process and is quenched to form granules Is the by-product obtained in the manufacture of pig iron in blast furnaces at around 1400oC to 1500oC in the molten form Is obtained by rapidly chilling the molten ash from the furnace by means of chilled water and is grounded about 400 m2/kg of fineness by using state-of-the-art grinding mill to make GGBS
Granulated Slag
Get Price Quote
We offer quality granulated slag manufacture of high performance concretes, especially those used in the construction of bridges and coastal features, where its low permeability and greater resistance to chlorides and sulfates can help to reduce corrosive action and deterioration of the structure.
Granulated Slag
Get Price Quote
Granulated blast furnace slag is a sand-type slag, which is manufactured by spraying high-pressure water on blast-furnaces molten slag. The product is sold for domestic and overseas markets as a ground granulated blast furnace slag and a cement material, as well as a material for civil engineering and construction work, silicate-calcium fertilizer, and raw material for high-grade glass. We know the value of time in this industry and thus we strive to supply our genius quality granulated slag within stipulated time period. Due to our result oriented and best quality granulated slag, we are counted among the renowned granulated slag suppliers in India. The concentration of granulated slag is Chemical Properties Percentage Calcium Oxide 32-45% Silica 32-42% Alumina 7-16% Iron Oxide 0.1-1.5% Magnesia 5-15% Sulfur 1-2% Moisture Content
Granulated Slags
600 - 1,400 Per Ton
10 Metric Ton (MOQ)
Granulated Slag
Get Price Quote
Granulated slag is formed by quenching molten slag in water to form sand-sized particles of glass. The disordered structure of this glass gives the material moderate hydraulic cementitious properties when very finely ground into granulated blast furnace slag, but if it can access free lime, the granulated blast furnace slag develops strong hydraulic cementitious properties.
Ground Granulated Blast Furnace Slag
5,000 Per Metric Ton
located in chennai(india), we are a high-flying name when it comes to quality-centralized and cost-effective products.you can rely on us for all the online and offline transactions, we have stringently made payment logs to make sure that no misunderstanding or inconvenience arises. the ground granulated blast furnace slag is widely used in various construction sites.
Ground Granulated Blast Furnace Slag
3,000 Per Metric Ton
Ground Granulated Blast Furnace Slag
Get Price Quote
Ground Granulated Blast Furnace Slag (GGBS or GGBFS) is obtained by quenching molten iron slag (a by-product of iron and steel-making) from a blast furnace in water or steam, to produce a glassy, granular product that is then dried and ground into a fine powder. Application GGBS is used to make durable concrete structures in combination with ordinary Portland cement and/or other pozzolanic materials. GGBS has been widely used in Europe, and increasingly in the United States and in Asia (particularly in Japan and Singapore) for its superiority in concrete durability, extending the lifespan of buildings from fifty years to a hundred years. Two major uses of GGBS are in the production of quality-improved slag cement, namely Portland Blast furnace cement (PBFC) and high-slag blast-furnace cement (HSBFC), with GGBS content ranging typically from 30 to 70%; and in the production of ready-mixed or site-batched durable concrete. Use of GGBS significantly reduces the risk of damages caused by alkali�silica reaction (ASR), provides higher resistance to chloride ingress � reducing the risk of reinforcement corrosion - and provides higher resistance to attacks by sulfate and other chemicals. The use of GGBS in concrete results in following environmental benefits Saves energy Reduces emission of carbon dioxide Conserves natural resources.
Ground Granulated Blast Furnace Slag
Get Price Quote
We are entrusted with the task of making available Ground Granulated Blast Furnace Slag all over India. Used in different construction purposes, we bring it from dependable sources. Ground Granulated Blast Furnace Slag offered by us has negligible adulterants. Owing to our well-maintained stock, we can cater to large orders within stipulated time. Packing is another criterion which we take care of! Contact us for price quotes. Highlights : Ground granulated blast furnace slag (GGBS) is a by-product of Iron and Steel making from a blasting furnace. It is used to make durable concrete structure in combination with Portland cement and other pozzolanic material. Below are the Typical Chemical Composition : Calcium oxide : 40% Silica : 35% Alumina : 13% Magnesia : 8% Typical Physical Properties : Colour : off-white Specific gravity : 2.9 Bulk density : 1200 kg/m3 Fineness : >350m2/kg
Granulated Blast Furnace Slag (GGBS Cement)
225 Per Bag
30 Metric Ton (MOQ)
GGBS is obtained by quenching the molten ash from the furnace with the help of water. During this process, the slag gets fragmented and transformed into amorphous granules, which is then grounded to desired fineness for producing GGBS. The chemical composition of GGBS contributes to the production of superior cement. Over the period of time, its load-bearing properties continue to increase as it absorbs surplus lime released during hydration to form more calcium silicate hydrates. These hydrates add to the strength of the cement. The multi-fold advantages of GGBS when used with Portland cement Ensures higher durability of structure Reduces the temperature rise and helps to avoid early-age thermal cracking Improved workability Lighter than PSC Cement A Green building material for sustainable constructions Where GGBS can be used? High-rise buildings. Marine applications such as dams, shore protection construction. Effluent and sewage treatment plants. Cement products such as bricks, tiles, pipes, blocks, etc. RMC, Batching Plants, Concretes.
Slag Lumps
Get Price Quote
From the sourcing of raw material till the final dispatch, our quality auditors keep a stern eye on every sage. All our payment terms and conditions are as per the requisites of law. A payment agreement signed with the patrons is fulfilled by us ethically and with a high level of transparency.
granulated blast furnace slag
Get Price Quote
We follow strict payment procedures for the transactions that ensure that no third party is involved in this. You can rely on us and we will offer you to make payments online or offline. Our entire range of products is produced as per international quality standards. Therefore, they are dependable and worth the price. The offered Granulated Blast Furnace Slag is suitable for long durable constructions.
Ground Granulated Blast Furnace Slag
2,500 Per Metric Ton
15 Metric Ton (MOQ)
We take care of all the raw materials used in the product manufacturing and designing. The inputs (raw material) used are quality certified and are remarkable for the production. We have automated warehousing system to keep pace with the latest trends and to meet the clients' requirements. Our professionals make certain that the products are kept safely.
Ground Granulated Blast Furnace Slag
1,100 - 1,650 Per Metric Ton
5000 MT (MOQ)
Ground Granulated Blast Furnace Slag
Get Price Quote
We are one of the prominent Exporters and Suppliers of Ground Granulated Blast Furnace Slag. Our Ground Granulated Blast Furnace Slag is procured from the trusted vendors who have always matched up with our expectations. The Ground Granulated Blast Furnace Slag is demanded by construction industry as it is used in concrete as cement for strengthening the structures. Our Ground Granulated Blast Furnace Slag is known for its temperature resistance and low moisture content. Features : White in color More strength Makes your projects resistant to chloride attack Increases the life of the structure more than 50% Used In : Construction industry Chemical Properties : SiO2 : 60% Al2O3 :19 % Fe2O3 : 3% Na2O : 2% CaO : 0.4% TiO2 : 0.2% MgO : 1.7 % K2O : 0.1 % H2O : 7.75 % LOI : 4.5 % Packaging Available : 20 Kg Bag 500Kg Bag 1000Kg Bag
Cities
