Hot Runner Heaters Dealers (58 products available)

Elmec produces hot runner heater by placing nickel chrome resistance wire in the tube made of nickel steel filled with magnesium oxide powder for effective heat transfer. The heaters are made to acquire strength so that it could be bent into any shape. Tape Heaters, Heater Pads and Thermocouples are also available.

• Application: Industrial
• Voltage: 220V
• Condition: New
• Power: 1-3kw
• Driven Type: Electric
• Material: Metal

• Material: Chrome Nickel
• Voltage: 240 V
• Condition: New
• Power Source: Electric
• Warranty: 1 Year
• Available in cross sections: 3 mm X 3 mm, 3.7 mm X 3.7 mm, 3.3 mm X 3.3 mm, 4.5 mm X 4.5 mm, 3.2 mm X 1.8 mm, 4.2 mm X 2.2 mm, 1.8 mm, 3.3 mm, 3.7 mm
• Watt density: 90 watt per square inch
• Sheath temperature: Up to 800 degree C

Applications Of Hot Runner Coil Heaters : Heat sealing Molds & Dies Nozzle heating Hot runner Nozzle heating Injection moulding Sprue bushing Automotive, medical industry Higher watt densities Rugged & Durable Construction Resistance to mechanical shocks High construction results

• Voltage: Upto 250V
• Section: 3.3 , 4 , 3 x 3 , 4 x 4 , 2.2 x 4.2 , 4 x 6 , 4.6 x 8.6
• Diameter Tolerance: ± 0.15mm

Anupam's Micro Tubular Heaters are manufactured in round, square or rectangular section to guarantee the greatest thermal exchange keeping an excellent efficiency and a good reliability. These heaters can be manufactured with built in thermocouple J or K type. Construction : The resistive wire is uniformly distributed in a compacted MgO insulation, with a CrNi-steel outer protection sheath. The heaters are annealed after manufacturing, thus acquiring a high malleability that allows their being subsequently bent into any complex shape, with extremely narrow bending radius

• Material: Metal
• Voltage: 230 V
• Watt density: 90 Watt Per Square Inch
• Condition`: New

By using quality packing material, we make sure that the products are properly packed and there will be zero damage during transit. Moreover, our packaging experts stringently check the entire lot before making the final dispatch. Only quality-tested material is used for preparing the offered lot. As a result of which, we our offerings stand high on the expectations of the clients.

The range is 100% quality checked and you can rest assured us for the same. We along with our quality auditors make certain that even the raw material used go through varied stages of checking. One stop destination for the best in class and exceptional assortment of Hot Runner Mold Heater; we are a reliable Supplier amidst the customers. The offered Hot Runner Mold Heater has wide contact surface offers high thermal conductivity towards the body that needs to be heated.

• Color: Grey
• Application: Industrial
• Warranty: 1year
• Material: Metal
• Power Source: Electric
• Features: Optimum Heating Capacity, Easy to Use, Compact Design, Thermal Stability

With the great support of our in-house storage facility, we are capable to undertake bulk and urgent requirements of the customers. This facility helps us in keeping the stock away from dust, moisture, rain and others damaging factors. We procure the inputs only from the trustworthy vendors present in the market. We know the importance of the raw materials and thus make sure that their quality will never be compromised. The Hot Runner Coil Heater, made available by us, is manufactured with great excellence, hence is quality assured.

we offer Hot Runner Coil Heater . DESCRIPTION Coil heaters are an advance concept of thermal engineering which has a construction similar to high watt density cartridge heaters. These heaters are also known as high performance tubular heaters or cable heaters. The basic construction of these heaters consist of compacted MgO, high temperature resistance wire and Chrome Nickel Steel tube. These heaters can be constructed with or without built in thermocoup APPLICATIONS Hot Runner Nozzles & Bushings Tube Extrusion Pipe Forming

• Power(Watts): 200- 800 W
• Size: Customized
• Voltage: 230-440 V

In order to append and respond to the assorted requirements of respectable clients, we are able to offer coil heater that is widely used in different industrial applications. The offered heater is manufactured from the top most grade raw material as well ultra modern technology by our qualified professional. Apart from this, the offered heater is available in variegated sizes and also modified as per the requirement of our prestigious clients. specification: - standard voltage: 240 in case of 440 v please consult - maximum temperature: 750 degree - high voltage tested features: - optimal insulation results in very long life of heater. - with or without thermocouple j or k type. - heavy ã�â¢ã¯â¿â½ã¯â¿â½duty construction results in very high resistance to mechanical shocks. Application: - nozzle of injection moulding machinery - other dies. - packaging industries. - plastic machinery. - hot runner nozzle. Ordering information - inside diameter in mm - outer diameter in mm - length in mm - voltage & wattage - with or without thermocouple - photo or drawing of heater.

Al-Ham Exports is acknowledged amongst successful Manufacturers and Suppliers of Hot Runner Heaters. These Hot Runner Heaters are manufactured in compliance with international quality standards. At the outset we have attempted to provide you with accurate and complete information regarding our products we manufacture. Apart from the standard sizes available with us we also specialize and cater to requirements as per customers specifications which includes special exits, Shapes & Sizes, Tolerances, Wattage and Wattage distribution, Voltage, Thermocouple placement, �U� slots etc. Since it is not possible to display all details what we can cater to, you may feel free to contact our office along with product specification and details preferably with detailed drawings. We shall be glad to cater to your requirements. Energy Saving Mica Band Heaters Available in Brass, MS & ChromeNickel Steel Sheathing.Expandable to fit around the BarralO.D. Easy installation & removal.Designed for Temperatures upto 4000C. Strining Features Technically advanced robust designsRequires low maintenanceHighly efficientSuperior performanceLonger functioning lifeAvailable in Premium, Economy & Power Saving OptionsChoice of terminal existsAvailable in Various Lead Terminations & ClampingEasy installation & removalEnergy Saving options availableHighly Non-corrosiveRobust Terminal Junction with Specially Designed Protection Cap. Note : Wide Range of Hot Runner Heaters and Mould Heaters available in custom sizes as per requirement.

• Sheath Material: High-Nickel Alloy ( CrNi-Stell, Material No: 1.4541 )
• Heating Conductor: Nickel / Chromium ( NiCr 8020, Material No: 2.4869 )
• Insulation Material: Highly Compressed magnesium Oxide ( MgO )
• Voltage Range: 240-250V ac
• Leakage Current: <0.5mA
• Insulation Resistance: Approx. 10MOhms
• Wattage tolerance: +/- 10%
• Thermocouple: Type' 'J' Fe/CuNi
• Standard Cold Length: 2.2 x 4.2 = 90mm, 3.2 x 3.2 = 100mm, 3mm dia = 150mm
• Max. Operating Temp.: 5000
• Min. Forming Radius: Flat         : 2.2 x 4.2 = 5.00mm, 1.8 x 3.2 = 4.00mm Square    : All sizes = 6.00mm Round      : 4.0 = 6.0mm, 3.0 = 4.00mm

• Round: 3,4,4.5,5 mm dia
• Square: 3x3, 3.2x3.2
• Flat: 2.2x4.3, 2.5x4.3, 2.5x4.5, 3x4.5, 3x5.2

Features Higher Watt density Built in type J or K thermocouple Max operation Temp 800 C Even Temp profile Max. heat transfer due to more contact area Max. total length upto 3000 mm Applications Moulds & Dies Nozzle heating Medical equipments Hot runner bushing

We are offering hot runner heaters. Mifa system now represents international reputed process control companies.ulti channel – 4 to 64 heater control- phase angle fired up to 40 amps. Hmi- 5-7″ to 10″ or ipc based, colour monochrome, touch keys, heater break.

• Unheated Length: 35mm (Standard)

Elmec hot runner heaters are made of nickel chrome resistance wire placed inside chrome nickel steel tube filled with mgo powder and compacted for faster and efficient heat transfer. The micro coil heaters are annealed to acquire malleability for bending into any shape. Hot runner heaters with built in thermo couple are also available. Hot runner bushes are produced with hot runner heaters of different cross section with inner brass and outer stainless steel cover.Moulds & dies Manifolds Hot runner nozzles and spruce bushes Packaging machineries Manifolds Injection moulding machine nozzle

Hot Runner Coil Heaters to our clients. These are made up of nickel chrome resistance wire to ensure faster and efficient heat transfer. Our offered range of Hot Runner Heaters and Bushes manufactured using high quality raw material and advanced technology. Molds & Dies Nozzle heating Sprue Bushing

• Square: 3x3, 3.2x3.2
• Flat: 2.2x4.3, 2.5x4.3, 2.5x4.5, 3x4.5, 3x5.2
• Applications: Moulds & Dies,Nozzle heating,Medical equipments,Hot runner bushing

Features Higher Watt density Built in type J or K thermocouple Max operation Temp 800 C Even Temp profile Max. heat transfer due to more contact area Max. total length upto 3000 mm

Tubular Heaters are ideal for rough daily use, reliable and easy to maintain. Formed tubular heaters are available in round and square cross sections and various sizes and shapes as per manifold's design. These types of heaters are made of stainless steel or Nicolay with sheath diameter of 8 mm. The heating wire is helical wounded and made of high temperature resistant Ni-Cr alloy and the insulation consists of Magnesium Oxide (MgO). The connection ends are sealed with sealing components to protect the heater from moisture. Heaters are available in square and rectangular cross sections and various sizes as per our Hot Tip Nozzles / Hot Sprue Series Model.

Sunrise Products, an ISO 9001-2000 certified company, is a manufacturer of electric heating elements for low and high temperature applications as per the specific requirement of customers at competitive prices. These are manufactured by in different types of materials, viz., brass, copper, stainless steel, titanium, aluminium, incoloy, lead silica glass, ceramic, mica, etc. 

Elmec hot runner heaters are made of nickel chrome resistance wire placed inside chrome nickel steel tube filled with Mgo powder and compacted for faster and efficient heat transfer. The heaters are annealed to acquire malleability for bending into any shape. APPLICATION Moulds & dies Manifolds Hot runner nozzles and spruce bushes Packaging machineries Manifolds Injection moulding machine nozzle

• Voltage: 220V
• Power: 600W
• Driven Type: Electric
•  :  

we are offering Hot Runner Heaters & Thermocouple. Tubular Heaters are ideal for rough daily use, reliable and easy to maintain. Formed tubular heaters are available in round and square cross sections and various sizes and shapes as per manifold's design. These types of heaters are made of stainless steel or Nicolay with sheath diameter of 8 mm. The heating wire is helical wounded and made of high temperature resistant Ni-Cr alloy and the insulation consists of Magnesium Oxide (MgO). The connection ends are sealed with sealing components to protect the heater from moisture.

• Material: Stainless Steel
• Power: 230W
• Color: White
• Usage/Application: Injection Moulds
• Power Consumption: 500 - 1000 Watts

Micro Electric Corporation hot runner heaters are made of nickel chrome resistance wire placed inside chrome nickel steel tube filled with mgo powder and compacted for faster and efficient heat transfer. The heaters are annealed to acquire malleability for bending into any shape. Hot runner heaters with built in thermo couple are also available. Hot runner bushes are produced with hot runner heaters of different cross section with inner brass and outer stainless steel cover. Moulds & Dies. Manifolds. Hot runner nozzles and spruce bushes. Packaging machineries. Manifolds. Injection moulding machine nozzle. Available in following cross section     3.0 x 3.0, 3.30 x 3.30, 4.50 x 4.50 mm 4.20 x 2.20, 4.50 x 2.50, 3.20 x 1.80, 1.30 x 2.30 mm 3.30, 1.80, 1.60, 1.35 mm   Any other cross sections can be manufactures and supplied on request. Features Sheath temperature upto 800oC   Higher watt densities Build in Type "J"  (or) "K" Thermocouple Rugged & Durable Construction. Available as per customer's specifications

We are the manufacturer of Hot Runner Coil Heater cast in brass having an outer casing of stainless steel. Available with an added feature of built-in thermocouple its applications are similar to coil heaters such as hot runner nozzles, die casting nozzles, tube extrusion and pipe forming, but have some advantages over the latter.Advantages :•Highly non corrosive•Maximum heat transfer due to more contact area•Even temperature profile•Precision fit on hot runner nozzles•Higher watt density•SS casing acts a heat insulator

• Power: 100KW
• Material: Nichrome
• Power Source: Electric
• Voltage: 230V
• Usage: Induction Heater
• Packaging Type: Carton Box