Jacketed Gaskets Dealers

TEADIT double-jacketed gaskets are particularly suited for applications like heat-exchangers and boilers. The gasket is constructed of a soft, heat resistant, non-asbestos filler material, which is completely enclosed in a two-piece metal jacket. When pass partition bars are required, we offer a welded pass bar construction. With a welded pass bar arrangement the fluid is retained by the primary seal at the inner diameter of the gasket. Thus the primary seal maintains its function, providing a seal of higher integrity. Material standard       • Metal jacket: carbon steel, soft iron, 304 (1.4301), 316L (1.4404)       • Filler material: graphite Many standard bar configurations are available, special configurations on request.

A gasket with a metallic outer shell and either a metallic or non-metallic compressed fiber filler is Metal Jacketed Gasket where the filler material offers resilience and metal jacket protects the filler and resists pressure, temperature and corrosion.Metal jacketed gaskets manufactured at Goodrich Gasket are used as heat exchanger gaskets and also in pumps, valves etc despite of their limited recovery and resilience property. Gasket sealing is effective under high bolt loads, smooth flange surface finish and flange flatness.  

The double-jacketed, double-shelled gasket is similar to the double-jacketed gasket except that instead of using a shell and a washer, two shells are used in the fabrication of the gasket. It has the advantage of a double lap at both the I.D. and the O.D. of the gasket, adding greater stability to the gasket. The construction will withstand higher compressive loads. Double-shell gaskets are normally restricted to use in high pressure applications.

Metal Jacketed Gasket can come in different styles like Double Jacket, Single Jacket or Solid Metal, Soft Compressible filler material can be flexiable graphite, PTFE or Non Asbestos Compressed Sheet The filler material gives the gasket resilience, while the metal jacket protect the filler and resists pressure temprature and corrosion.

All gaskets are custom built to provide accurate & easy assembly of pass partition bars into tube sheet grooves. Metal jacketed gaskets are custom built gaskets with or without ribs & can be supplied in Carbon Steel, Soft Iron, SS304,& SS316.

Metal jacketed gasket Aiflon Metal Jacketed gasket(MJG)is made from graphite, ceramic, non-asbestos etc. Filler covered with thin metal jacket, such as stainless teel, carbon steel, copper etc., special used in sealing spots of heat exchanger, pressure vessel etc. This gaskets highly resistance against blow-out, suitable for high assembly stress 6200DJ Double Jacketed plain gasket 6200DC. Double Jacketed corrugated gasket 6200H DJG for Heat Exchanger 6200S DJG with special shape Filler material Jacket meterial Temperature Pressure. Graphite, Asbestos Non-asbestos Ceramic PTFE Carbon steel 300 6.4 Copper 400 6.4 3.4 316 530 6.4

Metal Jacketed Gaskets consist of a metallic outer shell with either metallic or non-metallic compressed fiber filler. The filler material gives the gasket resilience, while the metal jacket protects the filler and resists pressures, temperatures, and corrosion. Special used in sealing spots of heat exchanger, pressure vessel etc. This gaskets highly resistance against blow-out suitable for high assembly stress.

Double Jacketed Gaskets, offered by us, are highly appreciated for their durability and strength. These Double Jacketed Gaskets are available with us at the most affordable prices. We stand tall in being a leading Manufacturer and Exporter of Double Jacketed Gaskets in the market. We manufacture these Double Jacketed Gaskets by using state-of-the-art technology such as CAD & CAM. Features : The filler material is completely enclosed by a two piece metal jacket, which covers both the inside and outside diameters and both contact surfaceDouble Jacketed Gasket can be with or without Corrugation. Highlights : Superior qualityStrong makeDurableReasonably priced

A semi-metallic gasket system. Also called per tradition heat exchanger gaskets, which indicates the typical application. The gasket consists of soft filler encapsulated with a metal cover. The metal jacket provides compressive strength and blow out resistance. The filler provides compressibility and resilience.

Double jacket gasket premium quality raw material and modern methodologies. Clients can avail these products from us in different sizes and specifications as per their requirements.

Metal Jacketed Gasket can come in different styles like Double Jacket, Single Jacket or Solid Metal, Soft Compressible filler material can be flexiable graphite, PTFE or Non Asbestos Compressed Sheet. The filler material gives the gasket resilience, while the metal jacket protect the filler and resists pressure temprature and corrosion.

Metal jacketed gaskets specially designed as Heat Exchanger Gaskets are widely used on smooth flange applications. They are ideal for Heat Exchangers, Auto claves, columns, flue stacks, boilers, gas mains, valve bonnets, pumps and similar services. Camprofile gaskets used as Heat Exchanger Gaskets consists of a metal core with concentric grooves on either side with sealing materials. The Sealing layers (depending on the service duty) can be Graphite, PTFE (Teflon), CAF or Metal (e.g. Aluminium or Silver). Camprofiles can be used without sealing layers to provide an excellent seal but there is a risk of flange surface damage

Spur Corporation has been supplying Jacketed gaskets to top corporations all over the country.Jacketed gaskets combine the superior temperature resistance of a metal jacket with the sealing performance of a filler material. The filler material is fully enclosed by a two-piece metal jacket, which covers both inside and outside diameters of the jacket and the contact surfaces on both sides. Such gaskets are designed for high temperatures such as Fahrenheit, that is encountered in heat exchangers,boilers and similar type of applications.Heat Exchanger gaskets are more compressible than sole-metal corrugated types and offer better compensation for flange irregularities when high pressures are to be seale.We have adequate capacity to produce any shape and size with many compartmental ribs made out of different materials.They can be used for heat transfer equipment, condensers ,coolers,joints etc. We fabricate jacketed gaskets from any metal in any thickness customised to the requirement to provide compressive strength and blow out resistance, depending on the application’s corrosive conditions. For excellent compressibility and resilience, our filler materials for jacketed gaskets include flexible graphite ,non-asbestos, ceramic, PTFE and corrugated metal. Jacketed Metal are available in following varieties : SINGLE JACKETED GASKET: This type of gasket is widely used in engineering applications and air tool applications where space is limited, relatively low compressive forces are available for seating the gasket and gasket seating surfaces are narrow.The majority of applications for single-jacketed gaskets are normally 1/4" or less in radial width. DOUBLE JACKETED GASKETS: The application of the Double-jacketed gaskets lies in heat exchanger applications and are the most commonly used style of gaskets. Any material that is commercially available in 26-gauge sheet, and where the service is not critical, this type of gasket are available. Another application of the same lies in standard flanges. SINGLE - JACKETED OVERLAP: Where maximum flange width is approximately 1/4", single-jacketed overlap construction gasket is used. This finds application when the flange width makes it impractical to use a double-jacketed gasket and total enclosure of the soft filler material is required. DOUBLE JACKETED, CORRUGATED GASKET: The double-jacketed corrugated gasket is an improvement on a plain jacketed gasket in the sense that it will provide an additional labyrinth seal in the corrugations on the gasket. A double-jacketed corrugated gasket still relies on the primary seal on the inner lap. It also provides the advantage of reducing the contact area of the gasket, enhancing its compressive characteristics. ONE PIECE, TWO PIECE, THREE PIECE ONE SIDE OPEN, French type gasket: French type gaskets finds application in a one-piece jacketed construction for narrow radial widths not exceeding 1/4" and in two- and three-piece constructions for wider applications. The most commony used French type gaskets are fabricated using copper sheath. When the application requires the outer edge of the gasket to be exposed to fluid pressure,this type of gasket can also be used with the jacket on the external edge of the gasket.

Gaskets with a soft pliable core, surrounded by a metal jacket that totally or partially encloses the filler material. Pass partition bars can be incorporated, either integrally or welded into the gasket. Jacket may be corrugated. Metal jacketed gaskets are specially designed and widely used for heat exchangers, autoclaves, columns, pressure vessels, flue stacks, boilers, gas mains, valve bonnets, pumps and similar services. The gaskets are manufactured from a soft, pliable filler core surrounded by a metal jacket, chemically and thermally resistant to the working conditions, which may totally or partially enclose the filler.

We are engaged in presenting an extensive range of Reinforced Graphite Gaskets to our clients. These products are offered in various sizes as per the requirements of patrons. These are tested by our expert quality controllers to check their accurate dimension and fine finish.

Jacketed gaskets to tailor Stainless Steel Coils to fit you requirements. RK Steels (India) offers quick and reliable delivery for both small and large orders.

  Jacketed gaskets combine the temperature resistance of a metal jacket with the sealing performance of a soft filler. The jacket and filler materials are selected to optimizes temperature and chemical performance; construction style is dictated by pressure needs, gasket geometry and sealing issues.

We are among the leading names of the industry to offer an exquisite collection of Metal Jacketed Gaskets. Manufactured in different sizes and styles using machines based on advanced technology, these gaskets are high in demand. Our experienced professionals make sure that the presented range complies with the industry standards and exhibits supreme functionality.Features:• Supreme functionality• Advanced technology• Reliable