Jaw Chucks Dealers

• Type: rotary table
• Place of Origin: india

Designed for smaller milling machines. Table diameter 100 mm table is graduated 360 degrees. Worm gear ratio -1:36, which means that the 1 handle rotation shall turn the table by 10 degrees. Center height in vertical position: 2-116" (50 mm approx) hand wheel is graduated in divisions of 10 min & can be set to zero. Can be mounted both in horizontal & vertical position. Description of the chuck a high quality 4 jaw independent chuck, the body of which is made from sg iron & jaws are of tool steel hardened & ground. Same jaws are reversible as well. Supplied with a mounting back plate & fixing tee nuts with screws. The back plate has been drilled in a manner that it will fit to a 3 slot or a 4 slot rotary table. The chuck mounting is standard unimat thread m14 x 1

• Application: CNC Machine
• Finishing: Coated
• Number of Jaws: 3
• Features: Easy to install, Anti corrosive, Sturdiness
• Size: 150mm to 1800 mm
• Color: Metallic

Our valuable clients can avail from us a premium quality range of Three And Four Jaw Chuck that is high on demand in the market. Our provided chuck is exclusively manufactured at our vendors end using the best grade raw material and modern technology in adherence to the set industry standards. Offered chuck is easy to install and can be availed by our precious clients at affordable price.

CNC Lathes are used particularly to machine small and medium sized batches. This involves frequent changeover of the chuck jaws which can be accomplished without undue cost by using chucks with quick change jaws. Power Operated Quick Change Jaw Chuck provides a super high speed range.

• Type: Jaw Chucks
• Material: Cast Iron, Steel
• Application: CNC Machine
• Condition: Good, New
• Finishing: Coated
• Packaging Type: Box, Carton
• Power Source: Electric, Hydraulic
• Number of Jaws: 3
• Country of Origin: India
• Brand Name: Seco, Turno, Zither
• Power: As Per Standard

• Diameter of Chuck: 100MM

Self Centring Lathe Chucks 3 Jaw These chucks are best suited to grip circular cross-section. These chucks are also used for gripping hexagonal cross-section. These are often used on lathe.

We offer spl 6 jaw power chuck for ring components machining wehre ovality problem of turned components has to overcome.

These chucks are called Master Gripping Chucks because the Jaws of these chucks are split into two parts. Master jaws (base jaw) and top soft Jaws Master Jaws has a slot on the Top, which helps to Mount reversable Top Hard Jaws &Top Soft Jaws with Bolts. They are highly used Chucks in Industry. The Top Jaws are mounted on Base Jaws with Allen Bolts. It is possible to mount many top Jaws on same base jaws to provide suitable and quick grip to a variety of jobs. The base Jaws can also be mounted with soft Jaws, in case of second operation, when higher repetitive gripping accuracy is required. When soft Jaws are used you can have repetitive accuracy of (.015mm) 15 microns. The chuck is supplied with one Top Hard reversible jaw set and a Set of Soft Jaws. These Chucks are available in 160, 200, 250, 315 & 400 mm sizes and are supplied in 2 Jaw, 3 Jaw, 4 Jaw and 6 Jaws configuration.

• Type: Self Centering Chucks
• Shape: Round
• Application: Machinery
• Color: Grey
• Finishing: Polished
• Brand Name: Unnat

SPECIAL NOTES : The width of jaws for 4" x 4" jaw chuck is 0.500 ins. The size of mounting bolt for 4" x 4" jaw chuck is 1/4" and the hole to suit it is 9/32"

  Independent Lathe Chucks are built specially for heavy duty and strong grips. Bodies of Semi-Steel are made from selected material. Brinel hardness is kept to the standard ratio. The body is grounded finished.   Features Reversible gripping jaws robustly proportioned care hardness and ground for precision work position. All gripping jaws individually tested for Rack well hardness between 55-60 to ensure reduced wear & tear. All gripping jaws accurately ground to give maximum bearing surfaces. Screws are made from tested materials and quality as double bearing type to ensure long life. Operating screws tested to Rockwell hardness of 30 to 35. Jaws and Screws are made in ACME thread. Body of chucks made from graded casting.

We are offering 200mm 3 jaw self centring chuck seco gold accessories with chuck's forward hard jaws , reversible hard jaws , operating handle , back plate bolts.

• Number of Jaws: 3 and 4
• Material: Cast Iron
• Automation Grade: Manual

Since the day of our inception, we are engaged in supplying jaw chuck and offering the same at competitive rates. From marketplaces of Tamil Nadu(India) to all the others, our organization is capable of providing the product to purchasers as per requirement.

• Size (ins): 3/8 ,1/2
• Available: Wooden, Plastic handle

Double speed with 3 jaw Chuck.

We are offering 22 inch 4 jaw lathe chuck. our company manufactures and supplies a wide range of optimum quality lathe chucks. The comprehensive array of lathe chucks which we offer is especially used for the manufacturing of for heavy duty and rigid gripping products. Due to the quality rich features, our entire range of lathe chucks is highly demanded in far east and middle east countries. These are made from high grade greated caustings and mild steels. We provide the wide assortment of lathe chucks in excellent wooden boxes. gni manufactured specially for heavy duty and rigid grippingbodies of semi-steel are made from selected materialbrinell hardness is kept to the standard ratiosmooth finish test every chucks after completion is put on testthe gripping and alignment of jaws is tested by dia-indicator grinding round back and front surfaces of body are grinded for accurate runningevery step of jaws is tested by dial indicator supervision every jaw is checked with the micrometer under specialized supervision every time guarantee these chucks are fully guaranteed against defect from either faulty workmanship or faulty materialthe chuck is covered during its working life against breakdown or failureevery chuck carries one full year unconditional guarantee and services big bore the 4-jaw independent chucks have larger bore than normal chucksthese are suitable where machine is light and the job demands larger boreoperating key, mounting bolts and inspection report is provided with each chuckallen key & tap is provided with gni chucks brand specialists in fitting top quality of gni chucks is due to its efficient control & distributed tension of jaws over the bodyit is maintained by fitting the third (back) sliding surfaces of jaws closely into the third of actual

• Material: SS
• Application: Industrial
• Brand Name: BKI
• Finished: Polished

• Material: Matel
• Condition: New

• Features: Reasonable prices , Long Life , Maximum Gripping Power .

• Type: Jaw Chucks
• Application: CNC Machine
• Packaging Type: Box
• Country of Origin: India

Shop jaw Chucks available at Daljit Machines in 3 and 4 jaw chuck versions useful in metalworking production made from superior quality material. Self-aligning 3 jaw chuck is a general type that best suited to grasp hex bar stock whereas the main aim of 4 jaw independent chuck, a specialized metalworking accessory with its with four independent jaws can be centered to high precision and supplies versatility to keep hold of rectangular stock as well as other non-cylindrical shapes. The Chucks are made of special kinds of clamps in rotating nature which grip materials or tools together. 4 jaw chucks are different from 3 jaw chucks that holds square, round, hexadecimal shapes type work pieces in which the chunk wrench is used to adjust each chunk independently. Furthermore, reverse side of the diameter jaws are useful to seize hold of the superior work. Daljit Machines has mastered in offering brilliant quality of chucks to their clients.

These are special 2-Jaw Self Centring Chucks.These chucks usually have high height jaws with threaded holes. These jaws are kept soft so that machining or welding can be done on them. Special type of fixture can be mounted on the Jaws to suit special jobs.

This chuck is available with 3 jaws and is reffered as LOC-3. This is light weight lever operated chuck is specially designed for use by craftsmen on instruments, watchmaker's lathe, bench lathes, grinding machine as well as on small sized machine tools. The body of this chuck is made out of SG Iron to avoid breakage due to slim design of body. The grip of these chucks is limited as the design is without gearing. However this feature has advantage aiso. The sensitive movement avoids the danger of crushing and have great versatility for gripping fragile materials and components. Knurled ring, which operates the jaws, give ample grip for light work when hand operated, but a lever is provided for use where a stronger grip is required.

• Material: Cast Iron
• Shape: Round
• Color: Grey
• Size: 10"
• Diameter: 110 mm to 600 mm

We are named amidst the major Manufacturers, Exporters, and Wholesale Suppliers of cutting-edge 3-4 Jaw Self Centring Chuck (Zither Chucks) in Maharashtra, India. The 3-4 Jaw Self Centring Chuck is designed as per the set industrial quality standards. The 3-4 Jaw Self Centring Chuck is efficient in performance and long lasting in nature. Attributes Robust construction Meets industry standards Unmatched performance Longer functional life

6" to 4" Single Slott16" to 48" Double Slott

3 Jaw Self Centering True Chuck.  The width of jaws for 4" x 4" jaw chuck is 0.500 ins. The size of mounting bolt for 4" x 4" jaw chuck is 1/4" and the hole to suit it is 9/32"

• CHUCK SIZE INCH: 4, 6, 8, 10, 12, 14, 16, 18, 20, 22, 24, 26, 28, 30
• CHUCK SIZE: 100, 150, 200, 250, 300, 350, 400, 450, 500

Independent 4 Jaws Lathe Chuck Have Each Jaw Mounted On A Thread Spindle Allowing Independent Adjustment. Hardened Solid Jaws. Sizes Up to 96”. Bigger sizes also available.

Heavy Duty chucks refereed as HD, are suitable for normal working conditions. However these chucks will stand well ahead in Quality, Load carrying capacity and Life if compared with other competitive brands available in the market. Where other brands of chucks fail to give service, our chucks will give trouble free service for long period. The jaw-ways in body are of robust proportion which can withstand heavy loads. The diameter of screws is large enough to tolerate heavy cutting pressure and moreover large diameter of screws provide more contact area with threads of jaws. ACME threads of screws are very strong as the same have 29 degree taper. These do not break easily due to strength provided by large base of taper thread. Chucks from 160mm onward have double type thrust bearings of robust proportions which provide great strength. Operating Key, Mounting Bolts & Inspection Report is provided with each chuck.