Jet Centrifugal Pump Dealers (35 products available)

Power : 1-3kw

Material : Metal

Motor Phase : Single Phase

Power Source : Electric

Application : Water

PP ACID PUMP : 25000

Capacity : Up to 1890 LPM

We offer Centrifugal Jet Self Priming Pump Set - CJS Series that features pump casing and ejector unit, which are designed carefully to give the best possible hydraulic efficiency and suction lift characteristics. Sealing is by means of a bellow mechanical seal made of carbon & ceramic is fitted over the shaft, which is ground to close tolerance. Most modern and highly sophisticated machinery and technology are employed in the manufacturing of these pump sets using quality raw materials, dynamically balanced impellers and rotors to ensure long life. These pump sets are powered by a totally enclosed fan cooled and AC induction motor is suitable for continuous duty. Motor stator is made of low watt loss steel laminations assembled under pressure and rigidly locked in the frame. Dynamically balanced rotor of our Centrifugal Jet Self Priming Pump Set - CJS Series ensures vibrations and noise free operations as well as increases the life of bearing and seal. The varnish impregnated windings made of enameled copper wire offer excellent resistance. Shaft is made of quality steel, precision ground of sample size for transmitting the rated Horse Power. Construction of motor frame and usage of quality materials result in high performance and low temperature rise thereby increasing the life cycle of the motor. T.O.P (motor protector) is incorporated in all single-phase motors. All single-phase pump sets require an adequate motor protection control panel. Applications : Shallow well Houses Small farms Domestic pressure boosting Gardens Small industries Drinking Water supply Salient Features : High operating efficiency resulting in lower power consumption Good Suction lift characteristics Dynamically balanced rotating parts including rotor and impeller Balanced and rigid construction Back Pull-out design for easy servicing & repair Single shaft ensures permanent & correct alignment Inbuilt thermal over load protector in all single-phase pump sets Pumped Liquids : Clean, thin, non-aggressive, non explosive, clear, cold, fresh water without abrasives, solid particles or fiber having the following characteristics.

Max Flow Rate : 800 LPM

Head : 25MTR

Brand : SHARK

Model : SJP 1.0

Features : Sturdy design, High efficiency, Low noise

CG Self Priming Centrifugal Jet Pumps are designed for application in Open and Shallow Wells, Sumps. Years of experience, superior design and better manufacturing techniques have resulted into an efficient, robust and sleek pump. Strict quality assurance standards, during the total process assures trouble-free and reliable operation requiring minimum maintenance.    

Power Source : AC Powered

Motor Phase : Single Phase

Brand : Megha Tough

We are a Centrifugal Jet Pumps Manufacturer, Exporter and Supplier in Bangalore, Karnataka. Our Centrifugal Jet Pumps are manufactured with the use of superior quality components and are very durable. Known for their high performance, these Centrifugal Jet Pumps demand low maintenance. The Centrifugal Jet Pumps that we offer are available at economic prices. Why Our Centrifugal Jet Pumps? Easy installationHigh performancePowerful motorLow maintenance

Direction Of Rotation : Clockwise viewed from driving end

Class Of Insulation : B

Type Of Duty : S1 (Continuous)

Nominal pumpset size in : mm 25x25

Power range : 0.37kW - 0.75kW (0.5 HP - 1.0 HP)

Speed : 2880 RPM

Versions : Single-phase 220 - 240V, 50Hz, AC supply (Permanent Spilt Capacitor - PSC)

Maximum Total head : Upto 45 m

Maximum flow rate : Upto 1.1 mps (4 m /hr)

Degree of Production : IP 54

Maximum suction lift : 9 m

  :  

Part Name : Material

Rear cover / Bracket : Cast Iron

Motor Frame : Aluminium

Impeller : Cast Iron

Shaft : SS AISI 410

Pump casing : Cast iron

Sealing : Mechanical Seal  (Carbon & Ceramic)

JET SERIES SELF-PRIMING CENTRIFUGAL PUMP Application :- Tank filling Domestic water supply Water transfer Pressure boosting 

Features : High water pulling capacity,Low power consumption which results in energy saving,Operates at wide voltage levels

Kw/Hp : 0.1 to 10

Supply Phase : 1 Ph

Delivery Pipe : 21 to 40

No. of Stages : 0 to 10

Residential Pumps Type : Centrifugal Shallow Well Jet

Type : Multi Stage Centrifugal Pump

Weight : 100-150kg, 150-200kg, 200-250kg, 250-300kg, 50-100kg

Color : Brown, Grey, Light White, White

Voltage : 110V, 220V, 380V, 440V

Condition : New, Used

Power : 1-3kw, 3-6kw, 6-9kw, 9-12kw

Driven Type : Electric

Warranty : 1year, 2years

Application : Industry

Automatic Grade : Manual, Semi Automatic

Capacity : up to 150 m3/hr

Total Head : up to 400 meters

Temperature : from –10* C to 140* C

Pump Speed : 1450rpm , 2900 rpm

M.O.C. : Std. All Cast Iron, CI with Bronze / SS Fitted Impellers or All SS-304 / SS-316

Design Features Go to Top The CHP / CM – Series Pumps are Horizontal Foot Mounted Design, Single or Multi Stage High Pressure Centrifugal Pumps of Ring Section type with vertically split suction , intermediate and discharge casings. The intermediate casing are clamped together by external tie-bolts and sealed with gaskets/o-rings as required by the design. The pumps are fitted with integrally / externally cast bearing housing at both ends of the shaft. The pumps are also available with extra cooling chamber when handling hot water in application. Application :   The main application of CHP / CM-series pump is pumping feed water in Steam Boiler as Boiler Feed Pumps or Condensate Pumps. These High Pressure Multistage Centrifugal Pumps are suitable for irrigation, water works, sprinkler installations, condensate pumping, hot water, fire fighting , cooling water, R.O. Systems etc. applications.

Applications Rural and Urban Drinking Water Installations. Water Supplies for High Raise Buildings. Lawn & Garden Watering. Water Circulating Systems. Agricultural – Lift, Sprinkler and Drip Irrigation. Industrial Service Water Supply Schemes. Standard Features Most modern and latest in design. All the units are thoroughly tested for field conditions. Superior design materials & manufacturing processes assure a longer life. Easy installation. High Efficiencies – better than Internationalvalues, leading to energy saving. Silent, Vibration- free running. The components are made of selective materials under strict quality control. Effective After – sales service. Suitable for 160/240v in 1 ph and 300/440v in 3 ph. Manufactured by ISO 9001/14001 andOHSAS 18001 Company Special Features Available in both SPDP & TEFC constructions.

Frequency : 50/60 Hz

Motor Horse Power : 1-5 HP

Voltage : 110-240 V

Phase : Single Phase

Type : Centrifugal Pumps

Usage : Water

Weight : 100-150kg, 150-200kg, 200-250kg, 250-300kg, 50-100kg

Color : Brown, Grey, Light White, White

Voltage : 110V, 220V, 380V, 440V

Condition : New, Used

Operating Type : Manual, Semi Automatic

Power : 1-3kw, 3-6kw, 6-9kw, 9-12kw

Driven Type : Electric

Warranty : 1year, 2years

Voltage : 160-240V

Power Rating : 0.37 kW to 0.75 kW (0.5HP to 1.0HP)

Pipe Size : 25 x 25mm

Head : Upto 40 metres

Capacity : Upto 3600 LPH

Liquid : Clear Water / 40°C

Applications Residential Bungalows, Hotel Storage Water Tanks Small Farms Lawns and Gardens General Industries Water Circulating Systems Fountains Features Suitable for High Head Applications Self priming upto 8 metres at mean sea level Fitted with Thermal Overload Protector (T.O.P.) to prevents motor Burning Capacitor start and run type Motor and no need of centrifugal switch Suitable for wide voltage operation - 160 to 240V Extruded aluminum motor body Provided handle for Ease in handling Designed for more efficiency in wide range of operation

Power ( H.P.) : 0.5 / 1

Version : SP, 240 volts, 2880 RPM, 50Hz, AC Supply

Discharge Range (LPM) : 15 LPM - 60 LPM

Head Range (Meters) : 6 - 36 Mtrs.

Pipe Size (MM) : 25 X 25

Product features    High performance in terms of discharge as conventional Self priming and minimonoset Pumps.  Self priming up to 8.0 meters at mean sea level.  Optimally designed for higher efficiency in wide range of operation.  Fitted with thermal Overload Protector (T.O.P).  Totally enclosed fan cooled (TEFC) motor to prevent entry of dust & moisture.  Centrifugal Impeller with adequate clearance.  Unique Motor Design-cap Start & Run (PSC Motor) avoiding centrifugal switch.  Suitable for wide voltage operation - 160 to 240 V.   Applications Use for water supplies to: Residential Bungalows & Hotels Storage water tanks Small farms Lawns & Gardens   Technical Data

AQUAGROUP'S "TEXMO" Single phase high speed Self priming mini monoblocks pumpsets are Rugged and Reliable where the water requirement is fairly high. High efficiency with lower power consumption than the other types of small self priming pumps.   Applications Suitable for portable water transfer applications. Pressure boosting for residential water supply. Lawn and garden watering. Domestic water supply. Car washing. Overhead storage water tank filling.

Most modern and latest in design.  Easy installation.  Superior design materials & manufacturing processes assure a longer life.  All the units are thoroughly tested for field  conditions. Effective After - sales service.  Silent, Vibration - free running.  High Efficiencies - better than  International values, leading to energy  saving. Suitable for 160/240v in 1 ph  The components are made of selective materials under strict quality control. Manufactured by ISO 9001/14001 and  OHSAS 18001 Company

Frequency : 50 Hz

Type : Jet Pump

Voltage : 220 V

Motor Phase : Single Phase

Power Source : Electric

Motor Speed : 2250 RPM

Model Name/Number : J1032

Brand : Bindhu

Motor Horse Power : 0.5 HP

Frequency : 50 Hz

Voltage : 220 V

Country of Origin : Made in India

Phase : Single

Brand : KSB