Mixer Amplifier Dealers

Product Description: We take pleasure to introduce ourselves as one of the renowned firm of Bosch Mixer Amplifier. Features: Robust design Easy usage Durability

240W Network audio mixer Class D amplifier Designed IP PA Amplifier for the small size multiple room application such as warehouse, hospital, school and office Built-in Audio Controller and 240W Class D(constant voltage of 100V) amplification Multiple music programs could be matrix distributed from server to different zones Built-up over existing LAN/WAN network system, non-dedicated network system is needed Power up time is

All Purpose 7 Channel PA Mixer Preamplifier Each input channel has a 1/4 " balanced phone jack for Mic/Line & accepts both balanced & unbalanced signals. Independent USB playback channel with BASS, TREBLE and LEVEL controls. Built-in digital effects processor with Delay, Repeat & Level controls.

hitune bass two zone pa mixer amplifier with digital player htza 4000bt400 watts pa mixer amplifier with digital player and recorder with bluetooth. ac & 24v dc operation 6 mic & 2 aux inputs. box speaker/driver unit selector switch for each zone. Bass boost defeated at driver unit position for safer operation of driver units. Zone on/off facility. facilitates connection and operation of two separate groups of speakers simultaneously on ‘mono’ mode. Ideal for places of worship. line input & output on each zone for connecting to a mixer and booster amplifier respectively. Preamplifier output for recording. resettable circuit breaker for protection against overload and short circuit. ‘stereo’ music operation for dj programmes. instant transfer to dc power (car battery) if ac power fails. power output: 300w + 300w max., 200w + 200w rms at 10% thd, 180w + 180w rms at 5% thd, 165w + 165w rms at 2% thd output regulation: ≤ 2 db, no load to full load at 1khz input channels: mono 6 × mic 0.6mv/4.7kω, 2 × aux 100mv/470kω, stereo l/r 200mv/100kω, line l/r 1v/50kω frequency response: 50-15,000hz ±3db signal to noise ratio: 60db tone controls: bass: ±10db at 100hz, treble: ±10db at 10khz outputs: preamp 200mv/600ω, line 1v/1kω speaker outputs: 4ω, 8ω, 70v & 100v for each zone power supply: ac: 220-240v 50/60hz dc: 24v (2×12v car battery) power consumption: ac: 700va dc: 9a dimensions: w510 × h172 × d385 mm weight: 24.2kg

The Plena system pre-amplifier is a versatile, highperformance unit with call and mono BGM (background music). It fulfills a wide variety of public address requirements at a surprisingly low cost. It can provide dual channel operation for simultaneous calls and BGM for up to six different zones, using two Plena amplifiers.   Functions The call channel provides two inputs for the Plena call stations, LBB 1941/00 (all-call) or LBB 1946/00 (six-zone), with loop-through capability, and universal, balanced input. One is a 3-pin XLR connector for microphone or line level (selectable), and the other is a 5-pin DIN-connector with all‑call priority contact, which may also be used to start one of the available chime attention signals.The microphone input has a selectable speech filter for improved intelligibility, a volume control, and bass andtreble tone controls with shelving characteristics optimized for speech. The call channel is available on the balanced XLR master output.   » Six-zone system pre-amplifier, with single or dual channel operation » Two input channels for call stations » Universal input for microphone/line, with speech optimized tone control » Three inputs for BGM selection and music optimized tone control » Front panel zone selection for BGM and call station zone selection for calls » PC and trigger inputs for automated calls, alarm tones and chimes to selected zones   The BGM channel provides three inputs on stereo cinchconnectors, converted to mono, with front panel selection, volume control and bass and treble tone controls with shelving characteristics optimized for music. The BGM channel has a direct output on balanced XLR for dual channel operation. It can also feed the master output, with the lowest priority, for single channel operation. Zone selector switches on the front panel control the BGM routing. An overload protected 24 VDC output provides power for driving external relays, often making an external power supply unnecessary.An emergency/telephone input with signal level detector (VOX) and volume preset has the highest priority to allzones. Two trigger inputs (contact closure) activate alarm or time signals to pre-selected zones. Many different chime tones are available. A PC audio input with RS-232 control provides software controlled zone configuration, or automatic messaging in combination with the LBB 1965/00 Plena Message Manager. There are six levels of priority available for BGM, microphone, call stations, trigger inputs and emergency input. A set of relays directs the amplifier output(s) to different loudspeaker groups (zone switching).

he PLENA all-in-one mixer amplifier is a versatile solution for public address, emergency announcements and back-ground-music (BGM) requirements. This high-performance device is easy to install and operate.   Typical applications of PLENA all-in-one 180W mixer amplifier include use in supermarkets, restaurants, schools, retail chains, canteens, places of worship, gymnasiums etc where BGM provides the right atmosphere, at the same time announcements can be made clearly and with ease.   The All-in-one amplifier is mixer amplifier with inbuilt music source.The All‑in‑one unit can provide hours of uninterrupted music from USB or SD flash memory.The unit also has a built in FM tuner with presets. To ensure for optimum performance, the All‑in‑one unit has no moving parts, such as hard drives that can fail or wear out. The unit is supplied with an IR remote control for controlling the music source.The unit can be rack mounted by using the brackets that can be procured seperately. feature Two Zone output 4 microphone inputs with independent level control USB drive and SD card for MP3 playback Built-in FM tuner with preset memories 100V/Telephone input with priority and VOX Parts included : All-in-one mixer amplifier, Power cord, Remote control for Music source, FM Antenna with connector specification Electrical: Mains Power Supply: Voltage 230 VAC, ±10%, 50 Hz Inrush Current PLN-1AIO090-IN: 13A Battery power supply Voltage: 24VDC ±15% Current: 9A Performance: Max/Rated Output Power: 270W/180W Frequency response: 80Hz to 18kHz Distortion: 5 kOhm (line) S/N at rated power: ≥60 dB (mic); 65 dB (line) CMRR (mic.): >40 dB Phantom power supply: 9 V via 1.2 kohm (mic) Speech filter: -3 dB @ 315 Hz Music Input:  Connector: Cinch, stereo converted to mono Sensitivity: 200 mV to 300 mV Impedance: 22 kohm S/N at rated power: ≥70 dB

Mixer Power Amplifier with Equalizer, Public Address Syste

We are well known supplying company of Mixer Amplifier.

Mixer Amplifier, Speakers, Public Address System, Projector

P. A. High Power Mixer Amplifiers, USB Playe

Mixer Amplifier, Amplifier, Connectors, Bulk Cable, Cable, Video Cable

Mixer Amplifier, Amplifier, Ceiling Speaker, Cinema Loud Speake

Microphone Mixer Amplifier, Amplifier Sound Speaker, Microphone RCA Cabl

Power & Mixer Amplifier, Cassette Player Amplifier, Amplifier

Plena Mixer Amplifier, HID Proximity Reader, HID Microprox Ta

Bosch LBB 1906 / 10-60 Watt Mixer Amp, CCTV CAMERA WITH NIGHTVISIO

Mixer Amplifier 120W, DVD Portable Player, Integrated Amplifier