Moisture Analyzer Dealers

• Display Type: Digital
• Automatic Grade: Semi-Automatic
• Accuracy: 0.0001 G To 0.001 G
• Voltage: 220 V
• Readability: 1 Mg
• Power: 400 W
• Frequency: 50 Hz
• Capacity: 110g

• Type: Automatic
• Display Type: Digital
• Capacity: 71 g to 51 g
• Resolution: 0.001% to 0.1%

Details : Low moisture content measurement at 10 ppm (0.001%) resolution (MS-70) Fast and uniform heating with halogen lamp and innovative Secondary Radiation Assist (SRA) technology Accuracy verification with Sodium Tartrate Dihydrate (standard with MS-70, MX-50, and MF-50) sing the special “WinCT-Viscosity” software

• Brand Name: Michell instrument- U.K

We are offering dry check moisture measurement. The drycheck system, consisting of filter, flow meter & indicator, is an economic instrument package with good accuracy and stability, which could be easily installed for use in a number of dew point measurement applications. drycheck - application examples compressed gas drying of plastics breathing air general engineering power generation drycheck - technical specifications range: 100 to +20°c dew point power supply: 85 to 265 vac, 5060 hz output: 4-20 ma, corresponding to degree c or ppm, relays accuracy: ±2°c dew point operating temperature: -5 to +50°c flow rate - 1-5 litres min ingress protection – ip65 filtration: 99.5 % removal of 0.3 micron

• Brand Name: Shimadzu
• Display Type: Digital
• Readability: 0.001 g
• Maximum Capacity: 62 gm
• Pan Size: 95 mm Dia
• Temperature Range: 50 to 200 Deg C
• Heating Technology: Halogen heater
• Model Name/Number: MOC63u

• Type: Moisture Instruments
• Material: Metal
• Application: Industrial, Laboratory
• Grade: Technical Grade
• Color: Black
• Power Source: Electric
• Phase: Single Phase
• Warranty: 1 Yr

The edgetech instruments model ppm2 is a portable battery powered trace moisture analyzer designed specifically for monitoring moisture levels in dewpoint and ppm units. This trace moisture analyzer utilizes an electrochemical (p2o5) sensor in combination with a proprietary semi permeable diffusion membrane. The principal of operation applies the faraday's law of electrolysis which measures the dissociation current making it a fundamental measurement of the moisture present. The ppm2 is ideally used in relatively clean, dry, inert gas applications. Ppm2-fv positive pressure application, a portable battery powered trace moisture analyzer with a flow valve. Ppm2-vp atmosphere / vacuum application, a portable battery powered trace moisture analyzer with a vacuum pump.

We are offering portable moisture analyzer.features applications  -110°c to +20°c dewpoint sensor  fast, accurate and repeatable  built-in temperature compensation  small & lightweight  state-of-the-art electronics & software  advanced user-friendly graphical interface  programmable data logging  battery backed clock calendar  built-in sensor desiccant store for rapid results.

We present Omnimark Moisture Analyzer to our admired customers. Sustaining supreme quality tops our priority list. For that purpose, we have an exceptional team of capable quality auditors. This team matches the highest parameters of quality set by industry. It is popular for its low level moisture performance and built-in temperature and weight calibration. We make certain its durability by the protective packaging in which we provide our product.Description : The principle of operation of the Mark 3 is loss on drying. The instrument finalizes on a programmed rate of weight change compared to the actual initial weight of the sample over a programmed window of time. The Mark 3 analyzer is compared to a convection oven, vacuum oven or Karl Fischer titration to verify accuracy and precision. Accuracy is stated by the average of repeat tests compared to the standard AOAC or ASTM reference value while precision is established by the standard deviation of repeat tests on the Mark 3. Features : Thermally isolated balance with superior low level moisture performance of less than 50 ppm Up to four heater modules can be run with one control module Serial, USB and Ethernet for bi-directional connectivity Built-in temperature and weight calibration feature Backward compatibility to the Mark 2

Moisture Analyzer DR 166   (With or Without Printer) Moisture Analyzer use halogen lamp as a heating source, warming rapidly and uniformly heating. Intelligent software, humanized keyboard layout with large and clear back-LCD display so that the operators process more simple, and compact, strong adaptability Widely applied to industrial, agriculture , medicine and laboratory fields. some typical applications tobacco ,paper, food, tea, corn, chemical ,row materials, pharmaceutical material and textile materials etc.. Description ● Three analyzing mode. Auto mode：when the weight of evaporated water in every minute is below 1mg, the testing will stop automatically. Time mode：Finish testing within the preset time. Manual mode：Start or Stop testing by pressing “START” or "STOP” key. ●Three heating mode. Normal heating mode : Heating up to the set temperature directly after start. Quick heating mode: in first 5 minutes after Start, heat at high power that used at 150 degree , then, decrease and adjust the power of heating to make temperature at set point. Slow heating mode : Heat at a reasonable power to make temperature go up gradually  then keep the temperature at set point. Technology parameters: Weight range Readability Measuring scope Data output 0-100g 0.01%0.001g 0.2%-100% bidirectional RS232 communication Heater Setting Temperature Environment Temperature POWER 300W Halogen lamp 50℃-150℃ 10℃~40℃ AC220V±10%  50Hz±1Hz Pan size Dimes ion Weight Recommended analycal weight Φ95mm 370×260×230mm 8.5kg 1-10g Display content Standard configuration Moisture percentage, weight of sample, analyze and heating mode, sample No., preset temperature, preset time and running time. 1pcs communicate line; 1pcs power line;  2pcs sample pans; 1pcs Manual;    

we are offering Moisture Analyzer. Capacity 50gm to 200gm accuracy 0.1mg to 1mg pan size 100 ã� external calibration,lcd backlit display, glpgmp procedure,automatic finish of drying process.

• Warranty: 1 Year
• Shape: Rectangular
• Material: Metal
• Use: Industrial
• Feature: Durable
• Quality: Best

Speed, Simplicity and AffordabilityThe new OHAUS MB23 and MB25 Basic Moisture Analyzers combine high quality and durable construction into a sleek, compact design. The MB23 and MB25 offer dependable, accurate, results for a widevariety of applications.Standard Features Include: Flexible Performance –The OHAUS MB23 and MB25 provide accurate results at either 0.1% or 0.05% readability. And with your choice of infrared or halogen heating, they are ideal for textiles, wastewater, ceramics, food and other applications that require IR heating elements and measurements to 0.1% or 0.05%. Simple to Operate –Set up and operation is extremely easy. Just press and hold the temperature or time buttons to set drying parameters, add your sample and begin the test process. This makes the MB23 and MB25 ideal for routine tasks performed by operators of all skill levels. Compact, Easy-to-Clean Design –The compact footprint (17 x 13 x 28 cm) of the OHAUS MB23 and MB25 is designed to take up less space. Their easy-to-clean heating chamber is ideal for frequent use and inexpensive maintenance. Industry Leading Quality and SupportAll OHAUS MB Series Moisture Analyzers are manufactured under an ISO 9001:2000 Registered Quality Management System. Our rugged construction and stringent quality control have been hallmarks of all OHAUS products for over a century.

This fully microprocessor controlled precision moisture analyzer is a high technology solid state unit designed to operate in rough field service is available as a portable, field mounting rack/panel mounting versions. The high-quality LC-display shows the moisture in ppm. Compatible with most gases/vapors Designed for rough field use High-quality lc-display Direct ppm moisture measurement Fast response Very high sensitivity Zero- / span – calibration Regeneratable sensor

• Color: Grey
• Display Type: Digital
• Application: Laboratory
• Brand Name: Nipro
• Automatic Grade: Automatic
• Warranty: 1 Year
• Accuracy: 3.500 gm
• Calibration: External

Moisture analyzer is an ideal instrument used to measure moisture and the amount of dry mass as well as the consistency of fixed and volatile substances with high accuracy. The testing instrument is highly used in the industrial sector to analyze adhesive materials, woods, mass, dusts for the production and control of materials. The measuring system of moisture analyzer is integrated with all the advanced properties of modern balance. In addition to this, Presto offers an extensive range of testing machines for moisture determination. Presto’s Moisture Analyzer is fitted with halogen heating with precision weighing technology to effectively, quickly and accurately assess moisture content of the test sample under the test procedure. It is perfect for chemical, pharmaceutical and research industries for getting accurate and consistent results.     Moisture Analyzer MB-45 is a unique product used in labs and in production units for following quality control measures. The instrument is equipped with a round halogen lamp along with ramped voltage that permits uniform heating of test specimen to 200 degree Celsius. The round lamp mounted in the machine ensures better accuracy by heating the test specimen consistently with controlled voltage that enhance to lamp efficiency and directly enhances the life of the bulb. It offers quick and easy procedure for testing. It also provides multiple ventilation options that suit many moisture analysis applications. It is inbuilt with 50 drying programs in memory that enhances efficiency. It offers accurate temperature programming that provides high quality results.

• Country of Origin: India
• Type: Moisture Analyzer
• Application: Industrial, Laboratory, Moisture Analysis, Industrial Use
• Color: Grrey, White
• Condition: New
• Display Type: Digital
• Automatic Grade: Automatic
• Power Source: Electric

Specifications: No solvents or calibration No calibration model updates Determine free or chemically-bound fat Direct fat and moisture technique Accurate results in minutes Not affected by changes in color or texture Easy-to-use Check raw materials & pre-blends Analyze cooked or finished products for final release Maximize yield Analyze low-fat products Transmit data to printer or computer for statistical control   Rapid Moisture, Fat & Protein Analyzer Fast, accurate analysis Test precision to 0.01% Complies with standard methods Stable platform with reproducible results Upgrades easily to analyze fat, lipids, oils & protein

5E-MW6510 Automatic Moisture Analyzer is used to determine the total moisture and air dry basis moisture in coal, coke, biomass and other solid substance, which is widely applied in thermal power plants, coal industry, metallurgical, petrochemical, cement plants, research institutes and inspection company.

Our Moisture Analyzer is made to measure moisture content in products that do not experience chemical change when exposed to infrared radiation. We are identified as one of a reputed Moisture Analyzer Manufacturers in the national and international markets. Following stringent quality standard during production process, we have developed Moisture Analyzer which renders accurate reading of moisture in a product instantly. Features : High accuracy and repeatabilityEasy to clean designSimple to operateDurableConsistent performanceAffordable Apt to determine moisture content in : FoodPlasticAgricultural soilLight powdersTextileCeramicHeavy grained productsCoalCashew nutsRicePharmaceuticals Technical Specifications :ModelBasic Moisture Balance Model ARICO -23 Basic Moisture Balance Model ARICO -25 Capacity110 g110 gRepeatability0.3% (3 g sample)0.2% (3 g sample)0.2% (3 g sample)0.05% (10 g sample)Readability0.1% / 0.01 g0.05 / 0.0005 gSample size3 g to 20 g typical, 0.5 g min.3 g to 20 g typical, 0.5 g min.InterfaceBidirectional RS-232Bidirectional RS-232Timer1- 99 minutes, second increments to 60 minutes1- 99 minutes, 30 second increments to 60 minutesHeating technologyInfrared (no glass)HalogenPower100 to 240 VAC, 50/60 Hz100 to 240 VAC, 50/60 HzTare rangeTo capacity by subtractionTo capacity by subtractionOperating temperature range5oC to 40 oC 5oC to 40 oC Display typeCustom backlit LCDCustom backlit LCDPan sizeDiameter 90 mmDiameter 90 mmDimension17 x 13 x 28 cm17 x 13 x 28 cmNet weight2.3 kg2.3 kgShipping weight3.9 kg3.9 kg

• Material: Stainless Steel
• Application: Laboratory
• Display Type: Digital
• Finishing: Color Coated
• Automatic Grade: Automatic
• Power Source: Electric
• MOQ: As Per Customer