Motion Controllers Dealers

FEATURES : 1.All-in-One Multi-function          - motion control, servo drive, and PLC function included 2.Max 8 axes control at once          - simultaneous control 4 channels individually 3.Easy extension from 2 axis to 8 axis          - Door type hardware structure 4.Various options available          - Touch panel, Vision I/F, I/O, Joystick 5. RS232C or RS422 interface

VFD Supply, Drives, Programming, Repair and Installations of AC Drives in the range of 0.5Hp to 100HP. Siemens make SINAMICS, MICROMASTER model Drives. AllenBradley make 2300, PowerFlex 4, PowerFlex 4M, PowerFlex 40, PowerFlex 40P, PowerFlex 400, PowerFlex 70, PowerFlex 700, PowerFlex 700AFE, PowerFlex 700H, PowerFlex 700L, PowerFlex 700S, PowerFlex 753 and PowerFlex 7000 model Drives. TELEMECANIQUE make AC Drives. Altivar / ATV; Altivar 11 / ATV11 model Drives. Yaskawa make J1000, A1000, V1000 and VS mini model Drives DELTA Make C2000, VFD-VL, VFD-M, VFD-S and VFD-F Series model Drives. FUJI ELECTRIC Make FRENIC-Mini, FRENIC-Multi and FRENIC-Eco model Drives. Mistubishi Make A500, A700, A701, D700, E500 and E700 Series model Drives.

We are offering motion controller. The dmc-500x0 ethercat controller is galil motion control's newest entry in its latest generation of digital motion controllers. Incorporating all of the features of our flagship accelera series controller and designed with compatibility and flexibility in mind, the dmc-500x0 allows integration of remote ethercat drives into new and existing applications with just a handful of configuration commands. The dmc-500x0 is offered in 1 through 8 axis formats. Axes 1 - 4 can be configured as either local or ethercat drives while axes 5 – 8 can be configured for additional ethercat drives. Unique to the motion control industry, this ability to mix and match local and ethercat drives on the same controller provides increased flexibility for any application. In addition, the dmc-500x0 is fully compatible with galil’s internal servo and stepper motor amplifiers as well as third party external drives

Sony PS3 Accessories allow higher quality voice-chat on PS3 among many other functions.. Mute status, volume level, battery fuel gauge, charging status and connection status is displayed up on PS3's on-screen display. The headset can be used as a microphone when docked in the charging cradle (voice output from PS3 is automatically transferred to the TV in this case) and allows for easy storage of Headset when not being used. Range Dragon Age Origins SGGioteck PlayStation 3 HF1 ControllerGioteck PS3 Wireless HeadsetPlayStation Move Motion ControllerReal Arcade Stick Pro 3Sony PS3 Wireless Bluetooth

4 MHz step frequency, 4 axes. USB 2.0 connection. 100 Mbit Ethernet connection. 1 Status LED’s. Full  3  axes interpolation. 24 Standard CNC outputs. 0-10V output for spindle conrol. 36 Standard CNC inputs. Powered by +24V external. Field upgradable firmware. Runs on single core atom PC. Features Shortest possible  CNC production time, especially 3D work, depending on the product, can be up to 2 times faster . This is thanks to the advanced Look Ahead Feed Algorithm that works for all motion segments, lines and circles by looking at their curvature and reduce speed only when absolutely necessary. Simple one screen operation, UI designed for and by professional CNC operators. Nesting mode execution for multiple production. Optimized tooltip feed calculations for 4th axis milling, no tool breakage due to wrong tool-tip feed. Feed Override control while running 0-150%. Easy start half way in g-code file, using search method Slave axes, for systems with dual motors (tandem) on X, Y or Z axis. Special homing sequence for tandems, sets tandem straight. Tangential knife, you need to program only X.Y coordinates and the tangential knife follows, also in circles and lifts automatically up when needed. Backlash compensation. Spindle proportional ramp-up time. Collision detection when g-code job is loaded prevents machine damage. Running time estimation when job is loaded. Thread cutting (Lathe). OpenGL graphics allows real-time PAN/ZOOM/ROTATE Super long file mode allows endless files,  tested with 100.000.000 lines g-code. User interaction from G-Code with DlgMsg command and a lot more. Automatic tool change can be programmed entirely in G-code. Pause, Jog away, resume run in middle of g-code run. Hand wheel jog with position and velocity mode. Build in 2D CAM for drilling, engraving, profiling and pocketing, reads DXF . PLC for  customized Input/Output’s.

Get from us easy-to-use Elevator Speed Controller at rates that will never burn a hole in the pockets of the clients. We are ranked among the reliable names to get Premium Elevator Speed Controller. These Elevator Speed Controllers are made using the leading-edge technological concepts. Why Our Elevator Speed Controller? Easy to useLong-lifeFail-safe operations guaranteedPocket-friendly

  PVI,VME & PC104 formates standalone or bus configurable 1 to 32 axes,expandable to 128 axes devalopement tool for pmac application system built with 3 u format motion control board and accessories combination of motion controller and drive

MP3200iec The MP3200iec controller is the flagship of the MPiec series, offering up to 62 axes of motion control and up to 8 slots for option modules. MP3300iec The MP3300iec controller is the latest installment of the MPiec series. It offers up to 32 axes of motion control and up to 3 slots for option modules. MP2310iec The MP2310iec offers up to 16 axes of motion control and 3 slots for option modules. MP2300Siec The MP2300Siec is a single option module slot controller that offers up to 16 axes of motion control. MP2600iec The MP2600iec rounds out the MPiec Series by offering a single axis of motion control while combining controller and servo amplifier in one unit.

  KEB (Made in Germany) & Yaskawa (Made in Japan) make Multi-Axes Motion Controllers. From 1to 256 Axes of Synchronized Control. Programming using CoDesys (IEC 61131-3 Standard), a leading Programming Tool.

Salient Features   Spinpro – 9A Speed programmer works with all spinning machines SPINPRO – 9A IN G5/1 Production Improvement observed by 5-15% Displays: Length delivered, Delivery Rate, TPI/TPM, Spindle Speed, No. of doffs, Hanks, downtime, Runtime, Delivery speed, Production kgs and flickering length Optimum Production verses Energy Utilization Less waste & Yarn Breakages Uniform Hanks in Production Maintains set speed at supply voltage / frequency fluctuationsProduction in hanks and Doffs (Shift wise & Total). Spindle Speed, Delivery rate, TPI, TPM, Run time and Down Time are recorded Length based Speed pattern can be set up to 25 steps Speed pattern can be pre-programmed for nine different counts Speed reduction Percentage Ring traveler pattern can be programmed Password control for tamper proof operation Programmable slow speed facility RS 485 Serial port to connect with computer