Nitriding Steel Dealers

Nitriding steel, Nitriding steel are accessible in round bar, level bar and steel plate. Nitriding is a warmth treatment prepare that acquaints nitrogen into the surface of a steel and dependant on the material and nitriding process, a nitride case profundity of 0.05mm up to 0.50mm can be accomplished. With a high surface hardness nitriding steel grades offer expanded wear resistance. This can enhance exhaustion life furthermore enhance the corrosion resistance (however not for stainless steel grades). Nitrided steels are for the most part medium-carbon (extinguished and tempered) steels that contain solid nitride-framing components, for example, aluminum, chromium, vanadium, and molybdenum.

Material is usually supplied in the hardened & tempered condition in which state it is readily machineable. After Nitriding, a minimum surface hardness of 950Vickers (VPN), equivalent to 68 Rockwell is achieved.

20mncr5 Steels • 16mncr5 Steels • Aluminium • Angle, Channel & I Beam • Bearing Steels • Brass Copper • Case Hardening Steels • Construction Steels • Die Blocks • En – 31353354 • En-2419364147 • En-1A35111516 • En-89 Steels • ERW CRCA PIPE • Free Cutting Steels • HCHCR WPS Steels • High Speed Steels • Hot Work Steels • HR CRCA Sheet Plate • Mild Steels • Nickel Chrome Steels • Nitriding Steels • High Speed Steels • OHNS Steels • Open POT Die Forging • Pneumatic Steels • Profile Cutting • Silver Steels • Spring Steels • Stainless Steels

When it comes to choosing dependable Nitriding Steel Exporter and Supplier in Mumbai, we are counted by many manufacturers. This is because we offer high quality Nitriding Steel for use as raw material. Nitriding Steels are special grades low alloy surface hardened steels containing Carbon 0.3 to 0.45% and Cr-Mo as alloying elements with or without Al. These alloys when heated at about 500-525o C, in contact with cracked ammonia and nascent nitrogen diffuse into surface and form complex alloy nitrides imparting very high hardness resulting in high wear resistance and corrosion resistance besides anti spalling properties. Nitriding Steel containing Al develops hardness up to 1100 HV. Used To Make Injection Molding EquipmentHydraulic CylindersGears and PinionsDie InsertsValve and Gate PartsCamsPiston Pins Technical SpecificationsGrade%CMnSiNiCrMoSPAIEn-41BMin0.35Max0.1Max1.40.1MaxMax0.9

Bright Bars are of 2 types-1. Cold Drawn and Peeled 2. Turned.In a Cold Drawn Bright Bar the Hot Rolled Bars are pickled and drawn through a Tungsten Carbide Die as Cold Rolled, no heating is required, that is why it is called a Cold Drawn Bright Bar.Secondly in Peeled Turned Bright Bar the Hot Rolled Bar is fed into a Turning machine and the surface is turned removed to the required size of the Dia. This is also a Cold process, no heating is required. Bright Bars can be further Ground Finished for special applications.Bright Bars have a smooth and a Bright surface with Accurate Tolerance on the Dia. Accurate Tolerance means the tolerance of the Dia is very restricted i.e 0.10 mm approximatly depending on the size of the Dia and as per the customer’s specific requirement. These are the reasons why a Bright Bar enjoys advantages over a Hot Rolled Bar. Bright Bars can be used in automatic Machines for making Steelcomponents whereas a Hot Rolled Bar cannot be used.

Nitriding Steel, Forged Square Bar, Alloy Steel Full Hardening Stee

Nitriding Steel, Alloy Steel, Case Hardening Steels, Industrial Carbon Stee

Carbo Nitriding, Stress Relievin

Carbo Nitriding, Carburizing Service, Precipitation Hardenin

We are offering all types of nitrading steel that are available from us at very nominal prices.

en-41b, IRON & STEEL, High Speed Steel, Hot Die Steel, Carbon Steel, en-4