Paper Testing Equipments Dealers

Powerful. Comprehensive. User-friendly.   As the only device that measures TAPPI brightness, opacity, color, and fluorescence, the Brightimeter Micro S-5 facilitates the measurement and control of optical properties.Designed to conform exactly to the TAPPI Official Test Methods for the pulp and paper industry, this user-friendly instrument easily replaces several individual instruments. Measures under Illuminant C/2° Observer. Multi-function measurement routines facilitate operation and the quick collection of data.

The NEW Internal Bond™ Tester is designed to determine the internal bond strength of a variety of Paper and Board materials according to TAPPI T 569. The instrument design is based on a falling pendulum which creates a high speed impact on a paper specimen. The paper specimen is sandwiched between two double-coated tape substrates. The pendulum impact measures the total energy required to delaminate the internal fibers of a specimen in a "Z" type direction into two separate piles. The system also incorporates an automatic sample preparation station which allows five specimens to be accurately prepared simultaneously. APPLICATIONS Newsprint, Fine Paper, Liner Board, Book Stock, Carton Board, Medium, Coatings, Laminates FEATURES Storage and editing of up to 500 readings Selectable units (ft.lb/in², J/m² and kg•cm) RS-232 serial output Report printout with built-in printer Magnetic hammer release and magnetic brake Automatic calibration Automatic specimen hold-down during test sequence Settable limits, statistics-average, standard deviation, high/low results Automatic cutting of samples saves you time and keeps you safe 5.7 inch LCD color display with 320 x 240 resolution 15 Character alphanumeric keypad 6 function keys for easy test setup 10 soft key icons allow simple intuitive navigation of test functions Conforms to TAPPI standard T 569 Sample Prep Station A precision sample Preparation station with digital display and direct read out in kPa and psi units is available to prepare up to 5 test pieces at the same time. The Sample Prep Station is supplied to provide a consistent adhesive transfer when pressing the test specimen between the double-sided tape and aluminum platens. Included with the Sample Prep Station are 5 aluminum platens with a sample size of 25.4 x 25.4 mm (1.0 x 1.0 inches). The clamping pressure is adjustable from 345 kPa (50 psi) to 1379 kPa (200 psi). During the pressing operation a selectable dwell time can be set by the operator from 0-4 seconds. The factory setting is 3 seconds in accordance with TAPPI T 569. The system is designed with a reinforced anvil to prevent deflection during sample preparation. Reinforced anvil system prevents sample deflection during preparation! Prep Station Specifications Pneumatic clamping force: 50-200 psi Dwell time: 1 to 4 seconds Sample Press Timer: user adjustable 1-4 seconds 5 Aluminum platens: sample size of 25.4 x 25.4 mm (1.0 x 1.0 inches) Sample thickness range: up to 1.25 mm (0.050 inches) Clamping pressure adjustment: 345 kPa (50 psi) to 1379 kPa (200 psi) Clamping pressure resolution: 7 Kpa (1 psi) Clamping pressure control: at 690 kPa (100psi) is better than ± 21 kPa (7 psi)at 1034 kPa (150psi) is better than ± 34 kPa (5 psi)   Software Program Screen displa Provides a web-like page navigation menu driven user interface. Normal Mode Calibration mode INSTRUMENT SPECIFICATIONS Ranges: 0 -1050 J/m² (0 - 500 ft.lb x 10-3 ), 0 - 1575J/m² (0 - 750 ft.lb x 10-3 ) and 0 - 2100 J/m² (0 - 1000 ft.lb x 10-3 ) Pendulum Release: Magnetic Peak/Angular Resolution: 0.04° Standard: ½ ft.lb/in² pendulum standard, ¾ ft.lb/in² and 1 ft.lb/in² available for stronger materials. Options: ¼ ft.lb/in² and other weights also available Results directly in: ft.lb/in², J/m², kg.cm Statistics: Average, Standard Deviation, Minimum, Maximum and Calibrate function

NAUGRALABS LABORATORY PRODUCT NAME: MIT FOLDING ENDURANCE TESTER FOR TESTING LAB NaugraLabs Laboratory Product Code: NLE-Export-320007 Description and Specification for Lab Tenders Mit Folding Endurance Tester.  Mit Folding Endurance Tester - Folding or creasing plays a very important part in use of paper. Almost all varieties of paper are subjected to either single or repeated folds in the course of their application. Determination of folding resistance is thus of prime importance in assessing suitability of any paper for the end use.   The MIT Folding Endurance Tester for paper consists of a motor, pulley set, and linkage mechanism to give the desired angular oscillation to the folding head. A set of five interchangeable folding heads is provided to the papers of various thicknesses. A spring loading clamping jaw constrained to move without rotation in a direction perpendicular to the axis of rotation of the folding head and having its clamping surface in plane of this axis holds one end of the test specimen while the other end is held in the folding head civil lab equipments manufacturers.  Paper Testing Lab equipment manufacturers,exporters and Paper Testing Lab suppliers

Learn the art of perfect packaging with our premium quality Paper and Packaging Testing Equipments. Products are exported for industrial applications and educational use in colleges and university departments. Our comprehensive line of testing equipments includes GSM Balance, Box Compression Tester, Cobb Tester and many more. Quadrant Scale for GSM is a simple and quick device which directly indicates the weight per unite area in grams per square meter (GSM) on a sector scale when a sample of selected size is suspended from a clamp fixed to the pointer arm. GSM Balance measures the GSM of fabric, paper, flooring, PVC film and other flexible sheet material. The system is supplied with two templates. The GSM Balance is designed to give the weight per unit area of textile fabrics directly.

rightness, & Opacity Tester (ISO) The instrument measures brightness, opacity and color by diffused reflectance according to relevant ISO standards. It gives an instantaneous digital readout, which shows the Brightness, Opacity, Rx, Ry, Rz and ERIC values of pulp, paper, paperboard, coating agents, filter ,mineral and other similar materials. Made with imported opticals. Brightness, Opacity & Color Tester -ISO (Microprocessor based) The instrument measuring brightness, opacity and color by diffused reflectance according to relevant ISO standards. Gives out instantaneous digital read / printout, which compute worked out details such as CIE, Tri stimulus color, Rx, Ry, Rz, x,y,z, CIE Lab, Hunter Lab, ERIC values materials. It includes built-in/external Printer and different ranges of measurement routine. Made with imported Opticals.

we are offering cone collapsing strength tester. it is used to evaluate the collapsing strength of paper tubes, paper cores & paper cones for: radial compression crush. flat horizontal compression crush. flat verticalcrush.

For paper & Corrugated Board – Manual Clamping through rotation of wheel handle, automatic pressure & standard pressure gauges range : 0–7, 0-10, 0-35, 0-40 kgcm2.