PCM Cables Dealers (53 products available)

Focused towards delivering the utmost product range in terms of quality, we conduct frequent quality checks. We offer a variety of packaging options to our patrons and even provide customized packaging solutions. The labels on products are superior grade and do not smudge during shipping. Features : Heavy duty Quality standard compliant Long life

• Type: pcm
• Material: PVC
• Insulation: 1.0 mm
• Conductor dimension: 0.4/0.5 mm
• Operating Temperature: -20 degree C - +50 degree C
• Outside Diameter: 2.70 nom
• Length: as per your requirement - 100 mtr to 500 meter
• Cable Conductor: copper
• Brand Name: Tele-Plus
• Color: Grey

The pcm cables manufactured by our organization find wide usage in mobile communication and installation of antennas. These allow flawless communication between control rooms and transmitters that emit low level signals. We offer our entire range in standard sizes, and can also manufacture them as per the needs of the clients 0.50mm solid annnealed bare copper foam pe insulated 2 core twisted in pair , polyester tape , almyler tape with 0.50 mm drain wire individual shielded ,1,10,16 pair laid up togather polyester tape ,al myler tape,polyester tape with drain wire over all screened, rip cord ,pvc st-1 sheathed cable

• Voltage: 220 V to 1100 V
• Pair Range: 2 pair to 63 pair
• Insulated Material: PVC
• Durability: Long Life
• Salient Features: Low Crosstalk, Low Attenuation
• Specification: 4 Pairs to 64 Pairs +1 Drain Wire

• Insulation: PVC insulation
• Available Range: 2 pair to 63 pair (0.5mm
• Conductor: Annealed Tin Copper Wire
• Drain Wire: Alloy Drain Wire
• Screen: Braiding & Polyester Tape with ALU foil and mylar Tape
• Application: This Telecom cable is used in the Internal wiring in Exchanges

We introduce ourselves as one of the major Manufacturers, Exporters, and Suppliers based in India. The company offers the highest-grade PCM Cables to the valued clients. These PCM Cables are extensively used as a transmission medium for various industrial purposes. Our PCM Cables are skillfully fabricated using innovative technology and premium raw materials. Moreover, the clients can avail these PCM Cables in various specifications, as per their requirements. 100 Ω/120 Ω Balanced PCM Cables for Transmission Equipment Installation : Ref. Standards : Lucent, Ericsson, Alcatel & TEC Conductor : Solid plain annealed copper to IEC 60228 Insulation : PE/Foam PE Pair Colour : A Wire-Red, B Wire-Blue Lay-up : Two insulated conductors twisted to form a pair, Screened with numbered Aluminium mylar tape with 0.5mm ATC earth wire. Required number of pairs are laid up, stranded together to form a compact circular cable Wrapping : Polyester or polyethylene tapes are taped around the cable for isolation Screening : Aluminium mylar tape lapped with overlap. Nominal thickness of tape is 0.05mm with earth wire 0.5mm ATC Braiding (Optional) : 0.15mm ATC braiding with minimum coverage of 30% and 35-40o braid angle Sheath : PVC/FR/FRZH 0.4, 308.0, 5000, 2000, 120, 2.5, 70, 0.5, 187.9, 5000, 2000, 120, 2.5, 70 Relemac twisted paired cables are best suited for telephone and switchboard cabling applications. The conductor is made of solid annealed, high conductivity bare copper. The conductor is insulated with special grade high-density polyethylene different colors. The insulated cores are twisted with uniform lay to form pairs and are bunched together in such a manner so as to minimize cross talk. In 50 and 100 Pair cables the units of 10 and 20 pairs respectively are identified with color binders and stranded to form the laid up cable. The laid up cable is taped with polyester tape and further jacketed with a grey / black color PVC with high oxygen and temperature index. The cables can be used for switchboard and internal telephone wiring in high-rise buildings, offices, factories, hotels, residential complexes etc. They generally conform to ITD specifications G/WIR-06/02 May 94. Salient Features : Low Attenuation Low Crosstalk Application : Used as a transmission medium for carrying 2 Mb/s digital signal Add for More Details Please Send You Requirements with Technical Details Inquiry Now!!!!!

• Insulation: PVC insulation
• Application: This Telecom cable is used in the Internal wiring in Exchanges
• Lengths: 250/500/1000 meters.
• Available Range: 2 pair to 63 pair (0.5mm, 0.6mm )
• Conductor: Annealed Tin Copper Wire
• Drain Wire: Alloy Drain Wire

• Insulation: 0.9 mm HDPE
• Specification: 4 Pairs to 64 Pairs +1 Drain Wire
• Conductor: Annealed Tin Copper Wire
• Drain Wire: Tin Copper Drain Wire
• Screen: Braiding & Polyester Tape with ALU foil and mylar Tape
• Sheath: Fire Resistant PVC Coating
• Colour Code: International Colour Specifications.

"SUPERCAB" has specialized in PCM cables. Such cables are generally used in mobile communications antenna installation. the perfect construction of "SUPERCAb" PCM cables are perffered by majority of the market. We provide-80-85 of braiding coverage.

PCM Cables are available in multi core shielded construction and various sizes. These cables are available in Tin-Copper braided cables also. These high quality cables provide smooth communication between low level signal from transmitters to the control room.

The PCM cables manufactured by our organization find wide usage in mobile communication and installation of antennas. These allow flawless communication between control rooms and transmitters that emit low level signals. We offer our entire range in standard sizes, and can also manufacture them as per the needs of the clients.   Some of the other features include: Tin-copper conductor of 0.51mm. Electrolytic type reflects 99.9% purity. Provides 80-85% of precise braiding coverage. Available in multi-core shielded and tin-copper constructions.

We are reckoned as one of the leaders in the market for manufacturing a specialty range of PCM cables, PCM cables that makes use of tin copper conductor of 0.51 mm size and electrolytic type that reflects 99.9% purity. Majorly applicable in mobile communication and antenna installation, these PCM cables are provided in pair form which is done in close and uniform throughout its length to provide better transmission. These precision engineered cables provide 80-85 % of braiding coverage and are also offered as armoured cables for underground application

The twisted Pairs are stranded in a single unit of 10,20&25 Pairs, Wrapped helically with an identification colour binder. For higher number of Pairs cable, a number of units are stranded together to form a super unit. A coloured identification binder is wrapped around the super units for easy identification

Telephone cables is a pair of copper wires runs from a box at the road to a box (often called an entrance bridge) at your house. From there, the pair of wires is connected to each phone jack in your house. Along the road runs a thick cable packed with 100 or more copper pairs. Depending on where you are located, this thick cable will run directly to the phone company's switch in your area or it will run to a box about the size of a refrigerator that acts as a digital concentrator. All sizes of telephone cables are available from 2 pairs to 60 pairs.

• Available Range: 2 pair to 63 pair (0.5mm, 0.6mm, 0.7mm, 0.9mm)

These cables accurately combine the PCM signals of many lines, further transmitting them over a single cable or any other medium. Available Types:- Armoured Pulse Code Modulation Cables Unarmoured Pulse Code Modulation Cables Description:- Mitushi make PCM Cables, Annealed Tinned copper conductor, PE insulated and PVC sheathed. Individual & Overall shielded with Aluminium backed mylar taped with Annealed tinned copper conductor drain wire in continuous contact with aluminium side of tape, Armoured/Unarmoured Cable conforming to BS:5308/11/1986 & IS: 1554/Part-I/1988.

• lengths: 250/500/1000 meters.

Annealed baretinned high conductivity copper. PVCPECellular PE insulated. Insulated cores twisted to form a pair. Pairs laidup in sub-unitsunits in concentric layers. Taped. Overall PVC sheathed. Individual and or overall shielding with Aluminium-Mylar tapecopper tapelappingbraiding provided depending upon the requirement. Armouring provided with an extruded inner PVCPE sheath and overall sheath of PVCPE wherever required.

We manufacture, export and supply the best quality PCM Cables. These PCM Cables are high frequency cables and are separated in two compartments to enable enhanced functioning. One compartment is meant for carrying signals whereas the other one brings back signals with same efficiency. There is precision in the design for dealing with different applications in various industries. Features Better conductivityDurableHigh efficiencyCost effective Applications Transmission medium to carry 2 Mb/s digital signal

We are renowned as one of the most distinguished PCM Power Cables Manufacturers in India. The unmatched quality and inexplicable performance of the PCM Cables in respective applications attracted various leading industries to place huge and repeated orders. Additionally, the materials used in the manufacturing of the Pulse Code Modulation Cables are of excellent quality that ensures high durability, flexibility and resistivity to various non-supportive conditions. Customers are also facilitated with the availability of the PCM Cables in varied sizes and dimensions so as to meet the requisites of the application.

Our company is recognized as one of the major PCM Cables Manufacturers and Exporters from India. The unmatched quality and inexplicable performance has attracted various national as well as international clients to place bulk orders for the Pulse Code Modulation Cables. Moreover, customers are also eased with the availability of the PCM Power Cables in varied specifications. Ref. Standandards: Lucent, Ericsson, Alcatel & TEC Conductor: Solid plain annealed copper to IEC 60228 Insulation: PE/Foam PE. Pair Colour: A Wire-Red, B Wire-Blue Lay-up: Two insulated conductors twisted to form a pair, Screened with numbered Aluminium mylar tape with 0.5mm ATC earth wire. Required number of pairs are laid up, stranded together to form a compact circular cable. Wrapping: Polyester or polyethylene tapes are taped around the cable for isolation. Screening: Aluminium mylar tape lapped with overlap. Nominal thickness of tape is 0.05mm with earth wire 0.5mm ATC. Braiding (Optional): 0.15mm ATC braiding with minimum coverage of 30% and 35-40° braid angle. Sheath: PVC/FR/FRZH

hese cables are used for Transmission of Low voltage Signals, Electric Motors, D.C. Power Transformers. Panel Boards, Battery cables etc. “Poly Flex” brand PVC insulated Wire unsheathed with bright annealed plain copper conductor bunched andor stranded & good flexibility, voltage up to & including 1100 volts grade with IS-69490 mark.

We provide PCM cables for use in different industries. The specification for these cables is listed below. 100 Ω120 Ω Balanced PCM Cables for Transmission Equipment Installation Ref. Standandards: Lucent, Ericsson, Alcatel & TEC Conductor: Solid plain annealed copper to IEC 60228 Insulation: PEFoam PE. Pair Colour: A Wire-Red, B Wire-Blue Lay-up: Two insulated conductors twisted to form a pair, Screened with numbered Aluminium mylar tape with 0.5mm ATC earth wire. Required number of pairs are laid up, stranded together to form a compact circular cable. Wrapping: Polyester or polyethylene tapes are taped around the cable for isolation. Screening: Aluminium mylar tape lapped with overlap. Nominal thickness of tape is 0.05mm with earth wire 0.5mm ATC. Braiding (Optional): 0.15mm ATC braiding with minimum coverage of 30% and 35-40° braid angle. Sheath: PVCFRFRZH

Offered at most affordable prices, these cables are highly durable and thus posses excellent properties and features to cater the specific demands of clients. These cables are designed for duct application and offer termite & insect resistance properties. In addition to it, these cables can also be customized as per the specification of clients.

• Features: Excellent protection to cross-talk and Electromagnetic Induction.
• Conductors Size: 0.50 mm

All types of wire size available with our stock department. Compelete metre marking or customized marking.

PCM Cables, Broadband Cables, telephone pair cables, modem cable

Pcm Cable, Computer Power Cable, Pvc Coated Wire, multi strand copper wire

PCM Cables, Pvc Winding Wires, data communication cables

We provide PCM cables for use in different industries. The specification for these cables is listed below.   100 Ω/120 Ω Balanced PCM Cables for Transmission Equipment Installation Ref. Standandards: Lucent, Ericsson, Alcatel & TEC Conductor:Solid plain annealed copper to IEC 60228 Insulation:PE/Foam PE. Pair Colour:A Wire-Red, B Wire-Blue. Lay-up: Two insulated conductors twisted to form a pair, Screened with numbered Aluminium mylar tape with 0.5mm ATC earth wire. Required number of pairs are laid up, stranded together to form a compact circular cable. Wrapping:Polyester or polyethylene tapes are taped around the cable for isolation. Screening:Aluminium mylar tape lapped with overlap. Nominal thickness of tape is 0.05mm with earth wire 0.5mm ATC. Braiding (Optional): 0.15mm ATC braiding with minimum coverage of 30% and 35-40° braid angle. Sheath:PVC/FR/FRZH.

PCM Cables, Alarm Cable, Coaxial Cable, rectified alarm cable, Rf Cables

PCM Cables, Fire Resistant Wires, fr lsh wires, multi core cables