Pneumatic Chucks Dealers

It is a simple bellow type chuck mounted on an aluminum body for holding up the reel. It is used with a side clamp or a set screw on the base shaft.

• Size: 160mm Ø to 1000 mm Ø
• standard jaw stroke: 4.2mm to 12mm
• extended jaw stroke: 19mm to 25.4mm

Power Operated Pneumatic Front end Chucks are designed to utilise in full, the spindle bore for barpipe work. This design avoids rear mounting of the actuating cylinder and necessary draw bar connections. The chuck can be mounted on the lathe spindle with an adaptor flange as needed. The stationary air distribution system with the ports to supply air to the respective sides of the piston is mounted separately on the chuck.These power chucks are available in various sizes ranging from size 160mm Ø to 1000 mm Ø. The chucks are offered with standard jaw stroke of 4.2mm to 12mm and extended jaw stroke of 19mm to 25.4mm. The extended jaw stroke to hold pipes, casings and tool joints.For holding long oil pipes, one chuck is mounted on the front end of the spindle, and one chuck at the near end of the spindle. Power Operated Pneumatic Front end Chucks have twin non-return valves, which prevent the clamping air from returning through the port unless air is let in on the other side of the piston. This ensures retention of clamping force even when the air supply is switched off. The maximum operating pressure of the chuck is at 10 bar pressure.

• Material: Body: steel, Lugs: Alloy steel, Springs: Spring steel
• Size: 3”, 6” up to 12”

One of the most heavy and durable core holding option where mechanical advantage of tapper wedge is used through high pressure pneumatic cylinder. Best option for avoiding core damage in shaft less machines, Rotation of the chuck in either direction is possible, No axial force is applied: hence better life of winding and unwinding station. Concentric expansion and gripping force, Quick-Change between core sizes with slide-on core chuck adapters. Unmatched torque capacity at higher speed & jam free operation, Can be used for any core material without alteration.

Pneumatic chucks using best grade raw material, these are tested as per the set industrial standards. Our range of can be obtained at affordable prices. These are machined from solid brass. They are very useful devices for many industrial based applications.

RPEE Rollertech Air expanding chucks are available in lug type. Air chunk can be used for shaft or shaft less operations. It operates with a minimum of operator intervention Model kind of- Hollow Air chunk, Shafted Air chunk, Flange type Air chunk.

• Size: 14mm to 230mm

Boschert Safety Chucks are renowned all over the world as the industry standard for safety. Boschert Safety Chucks can be supplied to suit different shaft end configurations with a range suitable for square shaft ends from 14mm to 230mm, in either Pedestal or Flange mounting, to suit individual requirements.

Boschert Safety Chucks are renowned all over the world as the industry standard for safety. Boschert Safety Chucks can be supplied to suit different shaft end configurations with a range suitable for square shaft ends from 14mm to 230mm, in either Pedestal or Flange mounting, to suit individual requirements. Since the introduction 1948 the Boschert C – Chucks has got the standard of the Industry. This is a high quality product with an economic price. We are the sole distributor of Boschert Safety Chucks in India. Pneumatic chucks comes in wide verity   C Style/ Classic Series:  C style Safety Chucks are available in both Pillow Block & Flange Mounting configuration, Suitable for lower speed applications and it’s very economical.   VT Style Safety Chucks:  The replaceable inserts can be changed quickly and easily on the machine with minimum downtime. Any shape and size of insert can be chosen, in many different degrees of hardness in order to offer a perfect fit of the shaft and inserts. VT Safety Chucks available in both Pillow Block & Flange Mounting configuration.   Sliding Series Safety Chucks: This safety chucks are designed to be adjusted axially, allowing the roll to be aligned sideways during operation and are available as pillow block ore flange mounted chucks.   A Series Pneumatic Safety Chucks:  The solution for converting an unwind stand with mechanical Safety Chucks to the speed and safety of pneumatic Safety Chucks. Remove the mechanical chuck and replace with the A series chuck. All mounting dimensions are identical.   P Series Pneumatic Safety Chucks:  This safety chuck is designed for all manufacturing processes that require little or no operator presence and maximum safety. It safely holds the shaft, transmits the torque, opens and closes automatically. All switches and functions are safely integrated into the compact body of safety chuck.  Sensors will indicate if the chuck is open or close and has an additional mechanical lock for unexpected electrical system failures.

pneumatic chucks, cnc spare parts, Hard Jaws, radius hard jaws, Soft Jaws

male pneumatic chuck, Magnetic Chuck, adjustable magnetic chuck

Pneumatic Lug Chuck, Leaf Shaft, Torque Chuck Adapter Series

pneumatic chucks, lapping machines, collect chucks, grip down chucks

Pneumatic chuck

pneumatic chucks, Mechanical Pneumatic Edge Sensor

Pneumatic chuck, Automotive Fluid Connector, Valve Automation System

Pneumatic Drill Machine 10mm Reversible Keyless Chuck, Diamond Needle Files

Pneumatic chuck, Pneumatic Air Tools

Pneumatic chuck, planetary lapping machine, CMM Software Upgrade Services

Pneumatic Rotation Chuck, Broaching Job Work