Pre Engineering Buildings Dealers

The clients can avail the Pre Engineered Buildings from us that are manufactured as per the set standards of the industry. These Pre Engineered Metal Buildings are very versatile buildings systems and have generally low-rise building design. The well-structured Pre Engineered Buildings that we offer have robust construction and full-fledged structure. Details : Fitted with different structural accessories including mezzanine floors, canopies, interior partitions etc.Building is made water proof by use of special mastic beads, filler strips and trimsCan be finished internally to serve any functions and accessorized externally to achieve attractive and unique designing stylesHighly advantageous over the conventional buildings and is really helpful in the low rise building designMaximum eave height can go up to 25 to 30 metersThe application of pre engineered buildings concept to low rise buildings is very economical and speedyBuildings can be constructed in less than half the normal time especially when complemented with the other engineered sub systemsThe most common and economical type of low rise buildings is a building with ground floor and two intermediate floor plus roofThe roof of low rise buildings may be flat or slopedIntermediate floors of low rise buildings are made of mezzanine systemsSingle storied houses for living take minimum time for construction and can be built in any type of geographical location like extreme cold hilly areas, high rain prone areas, plain land obviously and extreme hot climatic zones as well Ideal For : OfficesHousesShowroomsShops

We are a renowned Manufacturer and Supplier of Pre Engineering Buildings. A Pre-Engineered Building is that, which is fully fabricated in the factory after designing and all components are assembled and erected at site with bolts, thereby reducing the time of erection. Factories, sugar industries, ginning and oil industries, warehouses, shopping complexes, show rooms, sporting complexes, recreation centres, assembly halls, etc. are covered under Pre-Engineered Buildings. Services for Pre Engineering Buildings that we provide, comprise of, designing, fabrication and erection. Our Pre Engineered Steel Buildings cater to the vast demands of the construction sector in an unmatched way, making us the leading Pre Engineered Steel Building Manufacturer. We take utmost care of customers specifications while designing and developing the Pre Engineered Building to meet their exact requirements. Pre-Engineered Buildings comprise of Structural Steel Columns and Rrafters Purlins and Girts. The Advantages Of Plated Portal Steel Buildings Are Larger clear spans ranging from 30 Mtrs and above Larger bay spacing thereby reducing the number of foundation and columns Better metal cladding system for aesthetically attractive structures Base of construction multi-deck structures Less dust accumulation Easy maintenance Easy and transferable / Portability Download

Pre Engineered Building (PEB) is a steel structure built over a structural concept of primary members, secondary members, and the cover sheeting connected to each other. The structural members are custom designed to be lighter in weight as well as high in strength. For today and in the future, Steel has become the material of choice in building construction, compared to concrete and timber. Thus steel building designs have become more flexible, durable and adaptable. Pre Engineered Metal BuildingsPEB revolutionized the construction market using built-ups in place of conventional Hot Rolled Sections. PEB is a steel structure built over a structural concept of primary members, secondary members, and the cover sheeting connected to each other. The structural members are custom designed to be lighter in weight as well as high in strength. Pre-Engineered Steel Buildings can be fitted with different structural additions like trusses, mezzanine floors, fascias, canopies and crane systems as per user requirement

we are absolutely transparent and process-driven in our workflow. Everest Pre-Engineered Buildings are an example of systematic development. From structural design to installation, our customised ERP runs on SAPR3 platform that enable you to track the status of your project at any point of time. Timely performance, excellent service backup and a faster response time are the reasons that renowned companies like Vodafone, Ericsson, DLF, Walmart, GM, Britannia, Godrej, Ambuja and ACC have trusted only Everest for their Pre- Engineered Building needs.

We provide Highly precise , Good Quality and on time PEB projects for Various Industries like Warehouses, Factories, Industries, Plant Buildings, Machine Platforms, Poultry Shed, Parking’s etc. Our Technology will make it very easy to track project status at every stages. We are capable to handle large Sizes of projects at very ease.

On the other hand, ‘Green’ designs have become a thriving industry. Using technology and innovation, many pre-engineering buildings are now being designed to have the least impact on the environment. Such deigns include recycled material used in constructing the building, green rooftops, a wastewater recycling plant, solar power, on-site power generators, materials that allow water to be captured from the outdoors and get filtered for indoor use.

Our expertise lies in constructing Pre Engineered Buildings. At V. N. Roofing & Cladding Pvt. Ltd., we are assisted by the veteran engineers to develop the Pre Engineered Buildings as per the requirements of the clients. The Pre Engineered Buildings, developed by us, can endure adverse environmental influences. There are several advantages that can be attributed to Pre Engineered Buildings that we develop. Some of the advantages are : Reduced Site Labor : There is less requirement of labor for Pre-cutting or pre-fabrication on site.Less Time Required For Construction : In comparison to conventional on-site construction methods, the time required for building Pre Engineered Buildings is typically reduced by 50-60%. This results in quick occupancy that further lessens costs and increases cash flow.Best Quality : Pre-engineering followed by the off-site factory-based quality control results in optimum quality make while there are lesser defects than on site construction.Low-weight Construction : Pre Engineered Buildings are manufactured from steel that is light in weight. Thus, less labor as well as less time is required for manhandling, assemblage and formation of the structure.Reduced Environmental Commotion To Site : Factory production of components is much less wasteful, and 'just in time' delivery of components to site ensures that installation is less disruptive to the surrounding area.Meeting and Exceeding Building Regulations : Building System conforms and at times, surpasses the existing and projected Building Regulations.Rapid Dry Envelope For Early Enclosure : Untimely enclosure of the building results in prompt internal fit-out.

Pre Engineered Buildings are custom made to suit a wide range of application in different industry sectors. It largely depends upon the requirement of the customers. They are also called Pre-Engineered Metal Buildings (PEMB) in some industry sectors. These metal buildings are different from conventional buildings in ways like speed in delivery and erection, flexibility in expansion and withstand severe weather conditions. We are a one stop solution provider for all your structural needs and have products ranging from Porta cabins, Canopies, Mezzanine Floors, Stairs, etc. Having an experience of over two decades in this industry. We truly comply with all the ISI specifications while designing and manufacturing all our structures which ensure all-out safety and are quite economical as well, as we incorporate quality raw materials and sheets in their making. Over the last few decades pre-engineered steel and metal buildings have become quite popular in the construction industry due to its flexibility, durability and adaptability over. These factors have made steel one of the most sought after materials for building construction. Our customer has large choice for sheet material which can suit their budget as well as requirement such as pre-coated sheets, Sandwich Panel GI sheets, Fiber sheets, and Polycarbonate Sheets. In the pre-engineered building systems one has the flexibility to accomplish indefinite array of building configurations, custom designs, requirements and applications. Factory sheds, warehouses, green houses, community halls and canopy etc., are some of the ways where the PEB systems can be applied.   STRUCTURAL SYSTEMS FOR PEB It’s the structural system that determines the speed and flexibility of the pre-engineered steel/metal buildings. Steel column and beam segments fabricated and painted in a factory and that are merely attached together at the site are part of this system. The beams and columns having an end plate with holes for attaching at both ends are custom fabricated I-section members. Their making includes steel plates that are cut as per desired thickness and then welded together to make I sections. CNC machines are used for cutting and welding due to the speed and precision they offer. The operators just require feeding a CAD drawing of the beams into the machins. As a result of this production line style of work, the speed and consistency in fabrication enhances to a great deal. For getting optimal structural efficiency, one can tailor the shape of the beams as well. The beams are deeper where the forces are greater and shallow where they aren’t. This type of construction is different from the conventional ones.   PEB COMPOSITION Our customer has large choice for sheet material which can suit their budget as well as requirement such as Each piece of the PEB system is quite similar. A crane is used to lift the painted steel sections, and they are then attached together by construction workers who climb to the suitable position. In the construction of huge buildings, we make use of two cranes that work from both ends. When the job of one crane is done, it’s taken away with the other finishing the work. This construction demands the installation of around 6 to 20 bolts that need to be tightened further so as to accurately match the amount of spin using a spin wrench.   WE ALSO TAKE SERVICE CONTRACT FOR FOLLOWING WORK : Maintenance for shed and building structure Fastest delivery time & speedy erection Transported in knock down condition

 one of the most trusted and leading Pre Engineered Building Manufacturers in India. 

At our end, Pre Engineered Buildings are precisely designed under the supervision of engineers. Pre Engineered Buildings are constructed using waterproof and sturdy material. Pre Engineered Buildings are provided with proper ventilation and other basic requirements. Our Pre Engineered Buildings are easy to install and dismantle as well. Pre Engineered Buildings can be used for cold storage, temporary usage at construction sites, warehousing, industrial & agricultural sheds.   Advantages Fast to erect Saves time and cost Helps maintain cleanliness and quality Customize as per area and client need Help maintain logistics and distribution of products Features Comprehensive and highly productive structural designed. Can be moved from one site to another, saving time and money without dislocating anything in the cabin. Standard maintained by the company in design & development. High heat insulation properties keeps the interior cool and comfortable. Offering more option more choice in furniture and fixtures. They are water tight and provide durable resistance to extreme weather conditions.

PEB is built up sections buildings are designed and crafted to order, packed in kits or trucks and drop-shipped directly to your building site- anywhere in the Qatar and the building is easy to assemble quickly and correctly We carry out design, manufacturing, assembling for the space frame structure as manufacture as per the request and the nature of the site requesting.