Pressure Indicators Dealers

We manufacture, supply wide range of Pressure Sensor & Indicator to our clients. This precision bonded strain gauge, stainless steel construction meets the industrial environment and is fully temperature compensated. Choice of electrical and provides pressure connections sensitivity: 2 mV/V (or better). It is not small size is of light weight. Our pressure controllers are micro controller based with 41/2 digit display with built in excitation facilities, digital calibration facility, Peak hold facility, RS232 output, relay output & analog output as options. High temperature sensors can be provided on request.  

Ace AI-DP1 Digital Differential Pressure Indicator is digital readout differential pressure indicator designed for measuring the room pressure inside Pharma clean rooms, Hospital operation theaters & Isolation rooms. Salient Features include Unit Conversion at the press of a key between mm.W.C.& Pascals integrated buzzer alarm for set point violation, Offset provision to meet Audit requirements, analog 4-20mA Output, 42 mm depth for Clean Room Modular Wall Fitment & RS 485 Modbus communication for BMS/SCADA/PLC integration.

Extensive application possibilities stainless steel pressure sensors with measuring ranges up to 1,000 bar are available for the model cph6300 hand-held pressure indicator. The robust and waterproof design makes the cph6300 ideal for use in adverse environments. This digital indicator automatically detects the measuring range of the connected pressure sensor and guarantees a high-precision pressure measurement. Functionality the cph6300 can be used for measuring both gauge and absolute pressure. Differential pressure measurement is possible with the 2-channel version cph6300-s2, and two model cpt6200 reference pressure sensors possible. The selectable pressure units are bar, mbar, psi, pa, kpa, mpa, mmhg, inhg, mh2o and one customer-specific unit. An integrated data logger and various other functions such as min, max, hold, tare, zero-point adjustment, alarm, power-off, peak value detection (up to 1,000 measurementss), average value filter etc. Ensure that the cph6300 can be used for many different applications. The large, backlit display and also a long battery life complete the features of the cph6300.

Measuring Air flow and air velocity Jumbo Indicator, Range -1999 to 9999 and resolution Configurable , 110230 VAC mains power operated. Wall mountable , alarm optional. Retransmission Out put : 4-20 mA optional Input from transmitter : 04-20mA, 0-10 VDC LED size available : 1�,2�, 4�, 6� ( 4 digit) Process offset : -999 to 999 selectable Available transmitter supply : 12 24 VDC Retransmission out put : 4 -20mA optional

Industrial control panels are designed and manufactured as per the actual requirement for plant operations. Nk instruments pvt. Ltd. Design and manufacture various type of indication and control panels, which are used for automation in industries. Such panels are manufactured in ms with powder coating, ss or, in flameproof versions. We provide those in enclosures like ip 52, ip 54, ip 65 or, flameproof.

Aerosense differential pressure indicator aerosense differential pressure indicator is demanded for its impeccable qualities and features. It is extensively demanded in the applications areas where hvac systems are installed to resolve the problem of humidity & temperature control. It is suitable for energy optimization and therefore widely used for the measurement of hvac duct pressure. Along with the prcised operations it has integrated high speed differential pressure sensor that provide accurate results in a significant manner. Features: integrated red led seven segment display differential pressure sensor stainless steel at the back

Unit of measurement : Pa, mmWC, mbar, inWG, inHg, PSI, mmHg High accuracy Software calibration - no trimpots 20~32 V DC supply User programmable using PC configurator PCC82 connected to USB port of any PC Auto-zero adjustment with pushbutton switch Dual 7-segment LCD display DIP switches for selection of unit RS485MODBUS RTU available

The Digital Pressure Indicator (CPH-6200) that we deal in is designed as per the international quality standards. It is compact in design and accurate in results. Order retail or bulk with us!   Specification : Model - CPH6200 Range - 0 to 1000 bar Accuracy - 0.2% & 0.1% Pressure source - External

Pressure Indicator PN Series - M5, G1/8, G1/4 Compact size Quick response Panel mountable Noiseless performance

PRC offers a broad assortment of Pressure transducers / transmitters available in various models and material of construction, the instrument is compatible with numerous pressure control applications. Owing to accurate operations and long service life,   Features & specification: Suitable for Industrial & Laboratory applications Rugged & robust construction High durability Excellent performance Technical specification Type – Strain gauge, Capacity – 1000 Bar, Rated Output (mV/V) – 2.0002, Non-linearity (% FS) – 0.020, Hysteresis (% FS) – 0.020, Repeatability (% FS) – 0.020, Creep (% F.S/30 min) – 0.019, Temp. effect on zero (% FS/10°C) – 0.016, Temp. effect on span (% FS/10°C) – 0.019, Zero balance (% FS) – ±1, Input impedance (Ω) – 350 ± 5, Output impedance (Ω) – 350 ± 5, Insulation resistance (MΩ) – ≥ 5000 (50 V DC), Excitation voltage (V DC) – 9~12, Allowed excitation voltage (V DC) – 5~18, Compensated temp. Range (°C) – 10°C~+ 40°C, Operating temp. Range (°C) – -20°C~+55°C, Safe overload (% FS) – 120, Ultimate Overload (% FS) – 150 Technical specification for Pressure Indicator   Indicator – Micro controller based with Normal, Peak hold, tare zero Display – 6 digit ½” LED display Least count – 0.1 Bar Accuracy – Better then ±0.5 % of FSD (Within range of 10 – 90% of capacity) Circuit supply – 5 V DC & 12 V DC Power Supply – 230 Volt AC, 50 HZ

Ace AI-DP1 Digital Differential Pressure Indicator is computerized readout differential weight marker intended for estimating the room weight inside Pharma clean rooms, Hospital activity theaters and Isolation rooms. Salient Features incorporate Unit Conversion at the press of a key between mm.W.C.& Pascals coordinated ringer alert for set point violation, Offset arrangement to meet Audit prerequisites, simple 4-20mA Output, 42 mm profundity for Clean Room Modular Wall Fitment and RS 485 Modbus correspondence for BMS/SCADA/PLC mix.

Pressure Indicators are designed to check the pressure inside the Cylinders, Vessels, Tanks, and Equipments etc. Paarth Pressure Indicator retains the pressure inside it, which can be carried to any desktop, which is shown by the indicator. The handy, pocket size and light in weight Paarth Pressure Indicators can be carried to any place. Paarth Pressure Indicator is a combination of Pressure Gauge, Needle Valve, and Fittings. Each one of them is made to exacting quality standards, undergoes 100% inspection and individual leak testing. This unwavering attention is to ensure the best cycle life and superior performance from every Paarth Pressure Indicator. Paarth Pressure Indicators are made in many different combinations of materials and thread connections to use them in varieties of fluids and applications. Your selection of Paarth Pressure Indicators guarantees you the very best in quality, durability and safety to go along with pricing that are competitive.

Aerosense Differential Pressure Indicator is demanded for its impeccable qualities and features. It is extensively demanded in the applications areas where HVAC systems are installed to resolve the problem of humidity & temperature control. It is suitable for energy optimization and therefore widely used for the measurement of HVAC duct pressure. Along with the prcised operations it has integrated high speed differential pressure sensor that provide accurate results in a significant manner. Features: Integrated red LED seven segment displayDifferential pressure sensorStainless steel at the back

DPG202 is a microcontroller-based, high performance battery operated, Differential Pressure Indicator with a dual row 4-digit LCD display. Alarms with audio output can be user programmed. The circuit is designed for ultra-low power consumption. This gives a battery life in excess of 1 year with the supplied battery. It can be user programmed for parameters such as unit, bias, sampling interval, alarm activation, etc. See more... Battery operated 1 year+ battery life (2 second sampling interval) High accuracy Software calibration - no trimpots Dual row 7-segment LCD display Zero & span adjustment with pushbutton switch provided on front Programmable sampling interval, unit, bias, etc RTC display (programmable) Buzzer output

Aerosense Differential Pressure Indicator Aerosense Differential Pressure Indicator is demanded for its impeccable qualities and features. It is extensively demanded in the applications areas where HVAC systems are installed to resolve the problem of humidity & temperature control. It is suitable for energy optimization and therefore widely used for the measurement of HVAC duct pressure. Along with the precised operations it has integrated high speed differential pressure sensor that provide accurate results in a significant manner. Features: Integrated red LED seven segment display Differential pressure sensor Stainless steel at the back Specifications: Case Material: 304 Stainless Steel Measure Range: 0-160MPa -0.1-0-2.4MPa Size: 100mm4"(From 40mm~250mm)

Aerosense Differential Pressure Indicator Aerosense Differential Pressure Indicator is demanded for its impeccable qualities and features. It is extensively demanded in the applications areas where HVAC systems are installed to resolve the problem of humidity & temperature control. It is suitable for energy optimization and therefore widely used for the measurement of HVAC duct pressure. Along with the pr??cised operations it has integrated high speed differential pressure sensor that provide accurate results in a significant manner. Features: Integrated red LED seven segment display Differential pressure sensor Stainless steel at the back