Post Free Ad Sign Up

Pressure Transmitter Dealers

(494 products available)
  • 115V Pressure Transmitter

    115V Pressure Transmitter

    25,000 / Piece
    • MOQ10 Piece
    • Brand NameACT
    • MaterialPlastic, Stainless Steel
    • ApplicationIndustrial Use
    • CertificationISI Certified
    • Country of OriginIndia
    • Temperature-25 +85deg C
    ...more
    www

    ACT Sensors Private Limited

    Ambernath West, Mumbai
    GST 9 yrs 4.4 (20)
  • RPM Transmitter

    RPM Transmitter

    Get Price Quote
    • Voltage220 V
    • Warranty1 Year
    • BrandSansel
    • Features : 4 Digit seven segment LED display Wide range 10 – 9999 RPM / RPS / RPH 3 to 30V DC Input Pulse from any type Sensor Opto isolated Re-transmission analog output 4-20mA or 0-10V DC Optional RS 485 (2 wire) MODBUS RTU Protocol communication Allows Maximum 3.5 kHz Input Pulse Speed 12 V DC Sensor Supply Universal Supply Voltage 90 to 270V AC / DC RPM / Rate / Frequency Front Key Scalable Scale factor & Exponential are Pre-settable 2 Relay Output with Front Key Set table Hi & Lo Set points Power ON Delay & Hysteresis for Relay Output is Provided Speed Monitoring Speed Control High & Low Speed Alarm Length Measurement & Control Line Frequency Monitor & Alarm All types of Speed / Rate / Frequency Monitoring & Control Applications Specification : Model: RP 491 Display: 4 Digit 0.5” 7 segment Red LED Accuracy: ± 0.05 % (± 1 count) Range: 10 - 9999 RPM / RPS / RPH Resolution: 0.001, 0.01, 0.1, 1 RPM / RPS / RPH (selectable) Input: 3 - 30V DC from Proximity Sensor, Photoelectric Non Contact Sensor, Encoder, Potential Free Contacts, Limit Switch etc.,. Input speed: 3.5 kHz (Max.) Scale factor: 0.001 to 9.999 Exponential: 10n = -3, -2, -1, 0, 1, 2 Relay output: 2 NO , 2 NC 5A rated Relays(power ON Delay & Hysteresis provided) Re-transmission (optional): Opto isolated analog output 4-20mA or 0-10V DC Communication (optional): RS 485 (2 wire) MODBUS RTU Protocol Sensor supply: 12V DC (±10%) 50mA Working temperature: 0 – 50°C Power Supply: 90 to 270V AC / DC 50Hz Dimension: 96 x 96 x 65 mm Weight: 350 grams (Approx.)
    ...more
    www

    Sansel Instruments And Controls

    Maduravoyal, Chennai
    GST 18 yrs 4.6 (30)
  • Vacuum Pressure Transmitter

    Vacuum Pressure Transmitter

    Get Price Quote
    • TypePressure Transmitter
    • MaterialStainless Steel
    • ApplicationMeasuring Vacuum Pressure
    • Power Supply12-36 VDC
    • PackagingStandard Packaging
    • Accuracy±1% Of Full Scale
    • Range0 To 1000 Mbar
    • Output4-20 MA
    • Response TimeLess Than 100 Ms
    • We offer a high-quality Stainless Steel Pressure Transmitter designed for measuring vacuum pressure with precision. Operating on a power supply of 12-36 VDC, this transmitter ensures accurate readings with an impressive ±1% of full scale accuracy. The 0 to 1000 Mbar range and 4-20 MA output make it ideal for various applications. With a quick response time of less than 100 ms, this transmitter is reliable and efficient. Packaged in standard packaging, this product is suitable for manufacturers, exporters, suppliers, and traders looking for a dependable solution for vacuum pressure measurement.
    ...more
    www

    Automac Engineers

    Palej, Bharuch
    GST 9 yrs 4.7 (17)
  • Stainless Steel Pressure Transmitters

    Stainless Steel Pressure Transmitters

    Get Price Quote
    • ThermocouplesK, J, R, S, B, E, N, T, W, PL II, U, L
    • Type of InputRTD - Pt100, JPt100, JPt50
    • PV InputLinear - 4
    • Input Sampling Time500 ms
    • Input Resolution14 bit (each)
    • PV/SP Indication4-digit, 7 segment display
    • Known for its qualitative and excellent solutions, the company has been named among the top-notch Manufacturers, Exporters and Suppliers of Stainless Steel Pressure Transmitters based in Delhi, India. The offered product is assembled under the vigilance of experts, thus stands tall on quality parameters. Our Stainless Steel Pressure Transmitters are widely known for their compact sizes, easy configuration and cost effectiveness.   Details : 1/2% accuracy stainless wetted parts two wire 4...20mA The  Stainless Steel Pressure transmitter features compact construction, an integral amplifier, 2-wire 4-20mA output signal and extensive medium compatablility. The design of the  Stainless Steel Pressure Transmitter provides a 1/2% accurate, low cost transmitter that can operate over a wide temperature range with corrosion resistance. The  Stainless Steel Pressure Transmitter is available from stock in both standard and refrigerant models. Features: Easy to configure Two different configuration levels provide easy access to parameters. A 4-digit security code prevents unauthorized changes. Parameters can also be hidden to the user to prevent mis-configuration of the unit. Various Control algorithms These series of controllers provide several different algorithms: PID or ON/OFF control. Heat/Cool algorithms with 2 different PID sets. Dual display and Bargraph Two large 4 digits displays and one 10 LED bargraph display PV, SP and configuration parameters. Up to 8 LEDs display the status of the different Outputs (Control, Alarm, …) and also provides indication of the Auto/Manual and Programmer states. Setpoint Programming Extended Alarm capability Three different alarm outputs are available per instrument, 17 alarm modes are configurable. Autotuning capability - RS232 or RS485 ASCII protocol is optionally available. Up to 30 Controllers can be connected to a single host computer. The host computer can change the SP, monitor the PV, the output or change the configuration of the unit. Remote Setpoint capability. Manual / Automatic modes. Universal Power supply - Operates on any voltage from 85Vac to 265Vac at 50/60Hz. Large operating range - These instruments can operate from –20°C to +65°C (-4°F~149°F) Indication : Constant Value Storage System Non-volatile memory (E2PROM) Indication Accuracy - 0.5%FS Proportional Band ( P ) - 0~200% (On/Off action at P=0) Integral Time ( I ) - 0~3600 sec (PD action at I=0) Control Mode : Derivative Time ( D ) - 0~900 sec (PI action at D=0) Cycle Time - 0~150 sec (4~20mA=0, SSR=1, Relay=10) Dead Band Time - 0~1000 sec (dead time compensation) Relay Output  : Electromechanical relay - SPDT contacts 3A/240Vac Static relay driver output - Voltage Pulse, 20VDC/20mA Output : Current & Voltage outputs - 0~20mA, 4~20mA, 0~5V, 0~10V, 1~5V, 2~10V Motor Control Output - Servo motor valve control (open loop circuit) Phase angle control  - 1SSR, 3SSR, 1SCR, 3SCR Number - Up to 3 (optional) Modes :17 alarm modes available, hability to ignore the alarm the first time it occurs - Deviation high or low alarms. Deviation alarms. Alarm Band alarm. High or low alarm. End of segment alarm. Program run indication alarm. Timer alarm. Timer One timer is associated with each alarm. Retransmission Output Signal - SP, PV Type of Output - 4~20mA, 0~20mA, 0~5V, 0~10V, 1~5V, 2~10V
    ...more
    www

    Dydac Controls

    Mayur Vihar, Delhi
    GST 18 yrs 4.5 (30)
  • Differential Pressure Transmitter

    Differential Pressure Transmitter

    Get Price Quote
    • Number Of FlowerDPT - Differential Pressure Transmitter
    • ApplicationMeasurement Accuracy To The System Level
    • OutputChoice Of Linear Or Square Root Output Conformity
    • IntegrationDirect Digital Integration With Experion PKS And Other Control Systems
    • Sensor TypePiezoresistive Sensor
    • CompensationAutomatically Compensates For Real-world Temperature And Static Pressure Variation
    • We offer dpt - differential pressure transmitter. Choice of linear or square root output conformity is a simple configuration selection. direct digital integration with experion pks and other control systems provides local measurement accuracy to the system level without adding typical aid and da converter inaccuracies. unique piezoresistive sensor automatically compensates input fur real world temperature and static pressure variation. added "smart" features include configuring low.
    ...more
    www

    Myko Electronics Pvt. ltd.

    Saki Vihar, Mumbai
    GST 15 yrs 4.4 (30)
  • Pressure Transmitters

    Pressure Transmitters

    Get Price Quote
    • Country of OriginIndia
    • AvailabilityUpto 1 kg
    • Country of OriginMade in India
    • Packaging TypePacked in corrugated boxes
    • Automation GradeAutomatic
    • Power SourceElectric
    • Voltage220V
    ...more
    www

    RUDRA IMPEX CORPORATION

    Mumbai
    GST 5 yrs 4.5 (4)
  • Pressure Transmitter

    Pressure Transmitter

    Get Price Quote
    • Measuring RangeRefer Table - A
    • output signal4 to 20 mA
    • Accuracy±0.5% F.S.
    • Overload Pressure1.5 Times the Rated Value
    • Supply Voltage9 to 30 V DC
    • Long-term Stabilily±0.2 %/FS,/Year
    • Overload Resistance50 {V- 12]Ω
    • Temp. Coefficient≤1x0.0001°C - F.S.
    • Response Time10ms
    • Compensated Temp.-10
    • Span & full scale Adjustment±5% by two trimmers
    • ProtectionIP 65
    • Weight Approx165 g
    • The stainless steel pressure port makes the sensors resistant to aggressive media such as Oil, Fuel, Diesel, Waste Water and other aggressive liquids. The sensors are Factory calibrated using the state-of-the-art, highly productive electronic trimming technology.Features : Ceramic sensing element Shock Resistant and Vibration Resistant High Accuracy, High Stability Wide Operating Temp. Range of -40 to 125 °C Output Signal : 4 —- 20 mA
    ...more
    www

    Sigma Automation

    Bangalore
    GST 18 yrs 4.5 (30)
  • KLPT-50 Pressure Transmitter

    KLPT-50 Pressure Transmitter

    2,300 - 3,000 / piece
    • Accuracy+ 0.5% FS
    • output signal0.5-45V,4-20mA,0-V,0-10V
    • Power Supply12 - 24V
    • Electrical ConnectionM12 aviation plug
    • IP RatingIP67
    • ModelKLPT-50
    • Pressure rangeQ-1 Bar to 0-1000 Bar.
    • Overload pressure2* FSO
    • Working temprature- 40°C
    • Temperature drfit+ 0.02%FSIK
    • Process connectionG1/4 , 1/4NPT , R1/4 , or other
    • We offer the KLPT-50 Pressure Transmitter, model KLPT-50, designed for precision with an accuracy of +0.5% FS. This transmitter provides a reliable output signal range of 0.5-45V, powered by a 12-24V supply. Featuring an M12 aviation plug for electrical connection and an IP67 rating for protection, it ensures durability in various environments. With a pressure range from 0-1 Bar to 0-1000 Bar and overload pressure up to 2* FSO, this transmitter is ideal for critical applications. Operating in temperatures from -40°C to 125°C (-40°F to 257°F) with a temperature drift of +0.02%FSIK, it guarantees accurate and consistent performance. Suitable for manufacturers, exporters, suppliers, and traders.
    ...more
    www

    Kled Iot Sensing Private Limited

    Mumbai
    7 yrs 4.5 (14)
  • WIKA S - 10 PRESSURE TRANSMITTER

    WIKA S - 10 PRESSURE TRANSMITTER

    8,400 / Box
    • Brand NameWIKA
    • Accuracy0.5%
    • Output4 to 20mA
    • Country of OriginGERMANY
    • Model NumberS - 10
    • RANGE : 0 TO 0.1BAR(G) SUPPLY : 24vDC OUTPUT : 4 - 20mA, 2 wire loop powered PROCESS CONNECTION : 1/2"BSP(M)
    www

    Nuratek Sensor

    Jail Road, Morvi
    GST 10 yrs 4.6 (23)
  • Pressure Transmitter

    Pressure Transmitter

    Get Price Quote
    • MOQ10 Piece
    • MaterialMetal
    • Packaging TypeMetallic
    • FeatureDurable
    • Frequency50Hz
    • Temperature-25 +85deg C
    • UsageIndustrial
    ...more
    www

    Neptune Instruments & Electricals

    Ankleshwar Gidc
    GST 13 yrs 4.6 (19)
  • Hygienic Pressure Transmitter

    Hygienic Pressure Transmitter

    4,000 / piece
    • Brand NameLFIA
    • Driven TypeNew
    • CertificationISO 9001:2008 Certified
    • Number Of FlowerRf Transmitter
    • Country of OriginIndia
    • Automation GradeSemi-automatic
    • Voltage24V Dc.
    • Sizecostmisation
    • The functional principle of a resistive Pressure Transmitter is very simple. The pressure sensor converts the mechanical pressure value into a proportional electrical signal. The pressure sensor typically consists of a stable main body and a (thin) diaphragm. PT Series features an all-welded stainless steel measuring cell for improved media compatibility. There are no internal soft sealing ma-terials that may react with the media or iorate over time. The compact case is also made of stainles d is available with environmental protection ratings.Application: Water, Air, HVAC, Diesel, Power, Steel, Chemmical, Automobile, Food and beverages Industries etc Features: Stainless Steel wetted parts Small Compact design
    ...more
    www

    Level & Flow Industrial Automation

    Udyog Nagar, Delhi
    GST 6 yrs 4.1 (8)
  • Diaphragm Seal Transmitter

    Diaphragm Seal Transmitter

    Get Price Quote
    The Diaphragm Seal Transmitter, provided by us, is acclaimed for its make. To make sure that we offer only defect-free range of products, our quality experts cross check every product at diverse stages. Our assurance towards providing damage-free products to the clients is achieved through our use of quality packing material. In addition, we maintain streamlined packaging system supervised by experts. Filling & Calibration for All Type of Pressure Transmitter : Wetted Parts & Diaphragm: S S 316 Other Wetted Parts like - Monel / Hastelloy 'C', Tantalum, PTFE Coating / Lined etc Connection - ¼ / 3/8 / ½” BSP / NPT (M) Flange End Connection, Threaded Flush Daiphragm, Remote Sealed
    ...more
    www

    Ramco Instruments

    Sector 26, Gandhinagar
    GST 9 yrs 4.4 (20)
  • Danfoss MBS 3200 060G5939 Pressure Transmitter

    Danfoss MBS 3200 060G5939 Pressure Transmitter

    99 / piece
    • Brand NameDanfoss
    • Pressure0...4 Bar
    • Power Supply4...20 mA
    • Number Of FlowerPressure Transmitter
    • Country of OriginDenmark
    • Danfoss MBS 3200 Pressure Transmitter Type : 060G5939Range P(e) : 0...4 BarOutput : 4...20 mAElectr. : lTT CANONMech. : G1/4 Female
    www

    Gani Marine

    Kumbharwada, Bhavnagar
    GST 13 yrs 4.6 (20)
  • Honeywell Differential Pressure Transmitter

    Honeywell Differential Pressure Transmitter

    Get Price Quote
    • Number Of FlowerPressure Transmitter
    • MaterialBrass
    • Packaging TypeIndustrial Standard Packaging
    • ApplicationIndustrial Applications
    • We are offering honeywell differential pressure transmitter honeywell products we offer finds extensive usage across varied industries. We offer brass honeywell products are made available to the clients in secured packing within a stipulated time frame. Avail from us honeywell products at rock bottom prices. We are a reputed honeywell products manufacturer, exporter and supplier based in india.
    ...more
    www

    M/s Pyramid Control System (p) Ltd.

    New Industrial Township, Faridabad
    GST 23 yrs 4.5 (30)
  • Huba Pressure Transmitter Model 520.917S032401W RANGE -1-5 BAR OUTPUT 4-20mA

    Huba Pressure Transmitter Model 520.917S032401W RANGE -1-5 BAR OUTPUT 4-20mA

    10,500 / Piece
    • MOQ10 Piece
    • Brand NameHuba Control
    • Packaging TypeMetallic
    • PressureRANGE -1-5 BAR OUTPUT 4-20mA
    • Power Supply7 - 33 VDC
    • ApplicationIndustrial Use, Pressure Measurement
    • Model NumberHuba Pressure Transmitter Model 520.917S032401W
    • FeatureDurable, High Performance
    • Number Of FlowerPressure Transmitter
    • Availability200-250gm
    • Frequency50Hz
    • Country of OriginIndia
    • output signal4 - 20 MA
    • Huba Pressure Transmitter Model 520.917S032401W RANGE -1-5 BAR OUTPUT 4-20mA Relative Pressure Transmitter  Type - 520 Manufacturer - HUBA CONTROL Model - 520.917S032401W RANGE - -1-5 BAR OUTPUT -  4-20mA The  Compact  Type  520  Pressure  Transmitter  Is  Based  Upon The  Huba  Control  Developed  Thick  Film  Technology  Where  The  Pressure Measuring Cell Is Fully Welded.This  Transmitter  Meets The  High  Burst  Protection  Demands  And Is Suitable For The Use In All Types Of Refrigerants Including Ammonia.Pressure Range  -1 ... 9 bar / 0 ... 2.5 – 1000 bar Compact,Rugged Construction Welded Without Sealing parts,No Elastomer Seals Large Selection Of Connections Available. Saving Time By Quick Cable Mounting By The Customer With Swift Connector General Features: Compact, Rugged Construction Large Selection Of Connections Available Welded Without Sealing Parts, No Elastomer Seals Medium: Liquids, Gases And Refrigerants (Including Ammonia) Saving Time By Quick Cable Mounting By The Customer With Swift Connector SERIES Type 520 PRESSURE RANGE -1 ... 5 BAR POWER SUPPLY 7 - 33 VDC OUTPUT DC 4 - 20 mA ELECTRICAL CONNECTION M12x1 DESCRIPTION Pressure Transmitter PRESSURE CONNECTION G 1/4 INDEX PROTECTION IP IP67 ACCURACY ± 0.3 % fs MEDIUM TEMPERATURE RANGE -15 ... +125 °C RESPONSE TIME < 2 ms, (1 ms typical) MATERIAL Connection Stainless Steel 1.4404 / AISI 316L DIMENSIONS (MM) 24 x 46.7 MM CONFORMITY EN 61326-2-3 / IEC 68-2-27 / IEC 68-2-29 / IEC 68-2-6 / UL E325110
    ...more
    www

    D. P. Engineers

    Gandhi Nagar, delhi
    GST 9 yrs 4.5 (21)
  • PD-20 S Load Cell Transmitter

    PD-20 S Load Cell Transmitter

    35,000 / Piece
    • MaterialAluminum
    • Country of OriginIndia
    • Brand NamePuls Electronics Turkey
    • Power Supply10V DC
    • Power SourceElecrtric
    • Automation GradeAutomatic
    • Voltage12V
    ...more
    www

    In Age Industries

    Mumbai
    GST 2 yrs
  • Pressure Transmitter

    Pressure Transmitter

    2,050 / Piece
    • Input Pressure UnitsBAR
    • Steel Grade310
    • output signal4 TO 20 MA
    • Mounting TypeTHREADED
    • Measuring Range0 TO 1000BAR
    • IP Rating66
    • Accuracy0.5%
    • Power Supply10 TO 30VDC
    • Display TypeANALOG
    • ApplicationINSRUMENT
    • MaterialSS 316
    • TypeINDUSTRIAL
    • A Pressure Transmitter is an advanced industrial device used to measure the pressure of gases, liquids, or steam and convert it into a precise electrical signal (typically 4–20 mA, 0–10 V, or digital output). It ensures accurate and reliable pressure monitoring in demanding industrial applications.   These transmitters are designed with a high-accuracy sensing element, rugged housing, and stable electronics to deliver consistent performance even in high-temperature, high-vibration, or corrosive environments.   KEY FEATURES   High Accuracy Measurement (±0.25% to ±0.5% F.S.)   Output Signal: 4–20 mA / 0–10 V / Digital (Modbus on request)   Wide Pressure Range: Vacuum to 1000 bar (as per model)   Rugged SS304 / SS316 Construction   Compact & Lightweight Design   Excellent Long-Term Stability   Protection Class: IP65 / IP67 (model dependent)   Vibration & Shock Resistant   WORKING PRINCIPLE   The sensing element (diaphragm or piezo-resistive sensor) detects pressure changes and converts them into a proportional electrical signal. This signal is then amplified, conditioned, and transmitted to PLCs, controllers, or display units for:   Process control   Automation   Safety monitoring   APPLICATIONS   Industrial Automation   Hydraulic & Pneumatic Systems   Water & Wastewater Plants   Boiler & Steam System Monitoring   Chemical & Pharma Industries   HVAC & Refrigeration   Food Processing & Breweries   Pressure Monitoring in Tanks & Pipelines   CONSTRUCTION MATERIAL   Body: SS304 / SS316   Diaphragm: SS316L   Process Connection: ½” BSP / NPT / Custom   Electrical Connection: DIN Connector / Cable / M12   If you want, I can also provide:   ✔ Short version ✔ Long premium version ✔ Instagram/Facebook post caption ✔ Product specification tableA Pressure Transmitter is an advanced industrial device used to measure the pressure of gases, liquids, or steam and convert it into a precise electrical signal (typically 4–20 mA, 0–10 V, or digital output). It ensures accurate and reliable pressure monitoring in demanding industrial applications.   These transmitters are designed with a high-accuracy sensing element, rugged housing, and stable electronics to deliver consistent performance even in high-temperature, high-vibration, or corrosive environments.   KEY FEATURES   High Accuracy Measurement (±0.25% to ±0.5% F.S.)   Output Signal: 4–20 mA / 0–10 V / Digital (Modbus on request)   Wide Pressure Range: Vacuum to 1000 bar (as per model)   Rugged SS304 / SS316 Construction   Compact & Lightweight Design   Excellent Long-Term Stability   Protection Class: IP65 / IP67 (model dependent)   Vibration & Shock Resistant   WORKING PRINCIPLE   The sensing element (diaphragm or piezo-resistive sensor) detects pressure changes and converts them into a proportional electrical signal. This signal is then amplified, conditioned, and transmitted to PLCs, controllers, or display units for:   Process control   Automation   Safety monitoring   APPLICATIONS   Industrial Automation   Hydraulic & Pneumatic Systems   Water & Wastewater Plants   Boiler & Steam System Monitoring   Chemical & Pharma Industries   HVAC & Refrigeration   Food Processing & Breweries   Pressure Monitoring in Tanks & Pipelines   CONSTRUCTION MATERIAL   Body: SS304 / SS316   Diaphragm: SS316L   Process Connection: ½” BSP / NPT / Custom   Electrical Connection: DIN Connector / Cable / M12   If you want, I can also provide:   ✔ Short version ✔ Long premium version ✔ Instagram/Facebook post caption ✔ Product specification tableA Pressure Transmitter is an advanced industrial device used to measure the pressure of gases, liquids, or steam and convert it into a precise electrical signal (typically 4–20 mA, 0–10 V, or digital output). It ensures accurate and reliable pressure monitoring in demanding industrial applications.   These transmitters are designed with a high-accuracy sensing element, rugged housing, and stable electronics to deliver consistent performance even in high-temperature, high-vibr
    ...more
    www

    Preetemp Technologies

    Santej, Ahmedabad
    5 yrs 4.3 (7)
  • Pressure and Vacuum Transmitter

    Pressure and Vacuum Transmitter

    Get Price Quote
    • MaterialMetal & Plastic
    • Driven TypeElectric
    • ApplicationIndustrial Use
    • CertificationCE Certified
    • Frequency50Hz
    • Country of OriginIndia
    • Experience the highest quality Pressure and Vacuum Transmitters in Vadodara! Find trusted exporters and sellers here. Enjoy the best products and services! Long term stability batter then +-0.1 % FS/Yr fully ss 316 body. Mets CE and EMC Standards. Accuracy :0.25 % on FS. Thin fill technology for long time stability. Range : 0-10,16,40,50,60,100,160,200,300,400,700,1000 bar Vacuum range : -1 to 0/-1 to 1/-1 to 3 /-1 to5 bar 0.25 % Full spna Accuracy. Choiec of ma V or retiometric output stability :0.1 % for FS/2years.
    ...more
    www

    Swastika Industrial Solutions

    Halol, Panchmahal
    GST 2 yrs 5.0 (3)
  • Pressure Transmitters

    Pressure Transmitters

    3,200 / Piece
    • Brand NameWika
    • MaterialSS
    • Driven TypePower 24 VDC
    • Packaging TypeMetallic
    • PressureAs per requirement
    • Power Supply24 VDC
    • ApplicationIndustrial Use
    • Model NumberA10
    • Warranty1 year
    • 2 wire pressure transmitter available with ex stock1 week delivery time. Power: 24 vdc, output: 4-20 ma.

    Skytech Instrumentation Automation Pvt. Ltd.

    Annapurna Main Road, Indore
    12 yrs
  • Pressure Transmitter

    Pressure Transmitter

    Get Price Quote
    • Rangeup to 0
    • • Accuracy± 0.5%F.S.
    • • Long-term Stability± 0.2% / FS / Year
    • • Compensated Temp.-10
    • • Operating Temp. Range-40
    • • Storage Temp. Range-20
    • Features :• Ceramic Sensing Element• Shock Resistant & Vibration Resistant• High Accuracy, High Stability• Output Signal : 4 ~ 20 mA

    HTA INSTRUMENTATION (P) LTD.

    Chamrajpet, Bangalore
    8 yrs
  • Series HATX High Accuracy Pressure Transmitter

    Series HATX High Accuracy Pressure Transmitter

    Get Price Quote
    HATX Pressure Transmitter combines high accuracy with exceptional stability and reliability for environmental tests and measurements. All models come with NIST certificates and are available in barometric, absolute, and gage ranges. These transmitters are ideal for a variety of applications such as weather data systems, laser interferometers, altimeter setting indicators, and engine test cells. Series HATX transmitters consume a very low amount of power and possess an exceptionally fast warm-up and response time. With its excellent consistency and great performance, the HATX transmitter is well suited for the most demanding of applications.
    ...more

    A L M Engineering & Instrumentation Private Limited

    Kurla, Mumbai
    9 yrs
  • Dwyer DM-2002-LCD Differential Pressure Transmitter

    Dwyer DM-2002-LCD Differential Pressure Transmitter

    7,500 / Piece
    • Brand NameDWYER USA
    • MaterialMetal
    • ApplicationIndustrial
    • Country of OriginDELHI
    • Model NumberDwyer DM-2002
    • DurabilityLong Life
    • Surface FinishingPolished
    • ResistivityRust Resistant
    • Drive TypeElectric
    • Dwyer DM-2002-LCD Differential Pressure Transmitter A wide range of models are available factory calibrated to specific ranges Pressure connections are inherent to the glass filled plastic molded housing making installation quick and easy Digital push-button zero and span simplify calibration over typical turn-potentiometers An optional 3.5 digit LCD shows process and engineering units A single bush button allows field selection of 4 to 6 engineering units depending on range on LCD models Specifications Service: Air and non-combustible, compatible gases. Wetted Materials: Consult Factory. Accuracy: ±1% F.S. at 70°F. Stability: +1% F.S.yr. Temperature Limits: 20 to 120°F (-6.67 to 48.9°C). Pressure Limits: 10 psig (0.69 bar). Thermal Effect: ±0.055% F.S.°F (0.099% F.S.°C). Power Requirements: 10-35 VDC (2 wire). Output Signal: 4 to 20 mA. Zero and Span Adjustments: Digital push-button zero and span. Loop Resistance: DC: 0-1250 ohms maximum. Current Consumption: DC: 38 mA maximum. Electrical Connections: Screw-type terminal block. Display: 3.5 digit LCD, 0.7" height. Process Connections: 18" I.D. tubing. Mounting Orientation: Vertical. Weight: 4.8 oz (136 g). Model DM-2002-LCD Description Differential pressure transmitter, range .250" w.c., 62.2 Pa, 6.35 mm w.c., .622 mbar.
    ...more
    www

    Enviro Tech Industrial Products

    Gandhi Nagar, Delhi
    GST 16 yrs 4.4 (30)
  • Kavlico Pressure Transmitter PTE5000-250-1-B-1-Z

    Kavlico Pressure Transmitter PTE5000-250-1-B-1-Z

    4,250 / Piece
    • Model NumberPTE5000-250-1-B-1-Z
    • Brand NameKavlico
    • Country of OriginIndia
    • output4-20mA
    • Kavlico Pressure Transmitter,Range: 0 to 250 Bar,Output: 4-20mA,Proc.Conn. ¼â�� BSP(M),Elec. Conn.: DIN connector,Hermetically sealed, SS304 Internal wetted part ,Rugged & durable,SS304 construction ,Compact & Light weight ,Accuracy : 0.2% BFSL, Total Error Band 1%
    ...more

    Futuristic Climate Controls

    Vastrapur, Ahmedabad
    15 yrs
  • Pressure Transmitter

    Pressure Transmitter

    Get Price Quote
    • Electrical ConnectionDIN 175301-803 A and C, M12x1, 6 ft. cable, others
    • Pressure connection1/4 NPT , 1/2 NPT , SAE #4
    • Pressure rangesfrom 0 … 15 psi up to 0 … 10,000 psi
    • Non-linearity< + 0.5% BFSL ( < + 0.25% available)
    • Signal output4-20 mA, 0-10 V, 0-5 V, others
    ...more

    Enn Engineers Private Limited

    Laxman Vihar, Gurugram
    10 yrs
  • Compact Digital Pressure Transmitter

    Compact Digital Pressure Transmitter

    Get Price Quote
    • Brand NameFischer
    • Model NumberME12
    • Working Principle: -The measuring pressure is applied directly on ceramic diaphragm, which cause distortion. This distortion alters resistance of strain gauge on the rear side of the diaphragm, in proportion of the level of distortion. Electronic module of the pressure transmitter converts change in resistance to proportional standard electrical signals. To optimise performance inline with operating process conditions, the instrument can be configured on-site via PC programming adaptor EU13 . Key Features: 1.High accuracy 2.Robust and compact design 3.Overload protection 4.High vibration resistant 5.Minimum hysteresis Key Specifications: 1.Gauge pressure Measuring range: -1.0 ~ 0.0 bar to -1.0 ~ -24.0 bar (overpressure safety: 3 ~ 80 bar) 0.0 ~ 0.6 bar to 0 ~ 60.0 bar (overpressure safety: 2 ~ 200 bar) 2.Absolute pressure measuring range: 0~1 bar to 0~16 bar (overpressure safety: 2 ~ 40 bar) 3.Linearity: < 1.0% full scale (optional < 0.5% full scale) 4.Hysteresis: < 0.5% full scale 5.Permissible ambient temperature: -10° C ≤ Tamb ≤ +60° C 6.Permissible medium temperature: -10° C ~ +60° C 7.Protection class: IP65 acc. to DIN EN 60529 8.Materials (media contact): Chromium nickel steel 1.4404, ceramic Al2O3 9.Material (housing): Chromium nickel steel 1.4305 10.Nominal power supply: 24 VDC 11.Output: linear, 4~20mA, 2-wire 12.Characteristic curve inversion: increasing or decreasing 13.Attenuation: 0 ~ 200 sec Industrial areas: 1.Nuclear power plants 2.Thermal gas fired power plants 3.Chemical & manufacturing industries 4.Semiconductor plants
    ...more

    EK Engineering

    Old ginani, Bikaner
    9 yrs
  • DIFFERNTIAL PRESSURE TRANSMITTER

    DIFFERNTIAL PRESSURE TRANSMITTER

    Get Price Quote
    We are offering differntial pressure transmitter differntial pressure transmitter model : eja110a calibration range : pls specify accuracy : 0.075% on full scale diaphragm mat. : hastalloy –c276 wetted parts : ss 316 display : lcd type range setting switch : available power supply : 12 to 50 vdc output : 4-20 ma dc accessories : mounting bracket process conn. : ¼” npt (f) make : yokogawa brand name : yokogawa model number : eja110a eja110a : yokogawa eja120a : yokogawa eja130a : yokogawa eja310a : yokogawa eja210a : yokogawa
    ...more

    V.r. Systems Instrumentation Pvt. Ltd.

    Indira Nagar, Lucknow
    16 yrs
  • Advanced Nonincendive Valve

    Advanced Nonincendive Valve

    Get Price Quote
    • PurityEpoxy coated anodized aluminum enclosure with Polycarbonate cover Universal voltage solenoid and switching
    • The Axiom AN offers unmatched reliability using non-contact position sensing with solid state electronics and contaminant-tolerant pneumatic control. Featuring a space efficient design, the Axiom AN offers unrivaled convenience and cost-saving benefits in hazardous and general purpose process applications.
    ...more

    Metso India Pvt. Ltd

    DLF Phase II, Gurugram
    9 yrs
  • MEAS Compound Transmitter

    MEAS Compound Transmitter

    Get Price Quote
    • PurityAPPLICATIONS
    • RangeEnergy Generation and Management
    • Heavy Industrial CE ApprovalAdvanced HVAC Systems
    • 100 V/m EMI ProtectionRefrigeration Systems
    • Reverse Polarity ProtectionAutomotive Test Stands
    • Extended Temperature RangeIndustrial Process Control
    • 1% Total Error BandPumps and Compressors
    • Compact OutlineHydraulic/Pneumatic Systems
    • -40°C to +125°C Operating TemperatureAgriculture Equipment
    • The M5100 series pressure transducers from the Microfused™ line of MEAS, set a new price performance standard for demanding commercial and heavy industrial applications. This series is suitable for measurement of liquid or gas pressure, even for difficult media such as contaminated water, steam, and mildly corrosive fluids. The transducer pressure cavity is machined from a solid piece of 17-4 PH stainless steel. The standard version includes a 1/4 NPT pipe thread allowing a leak-proof, all metal sealed system. There are no O-rings, welds or organics exposed to the pressure media. The durability is excellent. The M5100 exceeds the latest heavy industrial CE requirements including surge protection, and is over voltage protected to 16Vdc in both positive and reverse polarity. This product is geared to the OEM customer who uses medium to high volumes. The standard version is suitable for many applications, but the dedicated design team at our Transducer Engineering Center stands ready to provide a semi-custom design where the volume and application warrants.
    ...more

    Care Process Instrument

    Subhash Bridge, Ahmedabad
    9 yrs
  • Pressure Transmitter

    Pressure Transmitter

    Get Price Quote
    Presenting Pressure Transmitters which are of the best quality for plant-use. The Pressure Transmitters manufactured by us are made from best grade raw material and manufactured to prevision under our team of qualified engineers. These are made for all kinds of industrial applications. We are one of the best known and trusted manufacturers, exporters and suppliers of Pressure Transmitters all over the country.  Our Pressure Transmitters serve maximum efficiency, longer equipment life and users safety. These are available at reasonable market prices with us.
    ...more

    Electronet Equipments Pvt. Ltd.

    Kondhwa, Pune
    11 yrs
  • Pressure Transmitters

    Pressure Transmitters

    3,500 / Piece
    • FeatureDurability ,Anti-corrosive, Robustness
    • Brand NameBaumer
    • MaterialStainless Steel
    • Applicationgeneral application pressure measurement
    • Model NumberCTX
    • Accuracy+- 0.5% FS (BFSL)
    • Input PressureUpto 200bar
    • Output Voltage4-20 mA
    ...more

    Whyus Technicals

    Gidc, Vapi
    9 yrs
More results
Filter by City

GENERAL LINK

Top Cities (India)

top