PVC Water Bar Dealers

• Length: 25-30mtr
• Size: 150x5mm
• Application: Construction
• Surface Treatment: PVC Water Stopper
• Condition: New
• Color: Black
• Material: Pvc
• Brand Name: SANDHYAFLEX

  A PVC water stopper is a construction material commonly used in concrete structures to prevent the passage of water through construction joints, expansion joints, and other openings. It's typically made of high-quality polyvinyl chloride (PVC) and is used to ensure a waterproof seal in various applications, including basements, tunnels, reservoirs, swimming pools, and water treatment plants. Key Features of PVC Water Stoppers: Waterproofing: The main function is to prevent water from seeping through joints in concrete structures. Durability: Resistant to chemical attack, corrosion, and degradation over time, making it ideal for long-lasting applications. Flexibility: PVC water stoppers are flexible and can expand or contract to accommodate joint movements. Ease of Installation: They are relatively easy to install during the construction phase, as they can be embedded in the concrete joints. Variety of Designs: Available in different shapes and sizes to suit specific joint configurations (e.g., straight, L-shaped, or T-shaped). Cost-effective: PVC is relatively affordable, providing an economical solution for waterproofing needs. Applications: Foundation and basement walls: To prevent water ingress in subterranean structures. Water tanks and reservoirs: To maintain water-tightness. Bridge decks and tunnels: To protect against water penetration. Swimming pools: To ensure a durable water seal. Installation Tips: Placement: It is installed in the construction joint or where two concrete surfaces meet. Positioning: Careful positioning within the formwork is crucial for ensuring its effectiveness. Sealing: After concrete is poured, the water stopper should be carefully checked to ensure there are no gaps or defects. Overall, PVC water stoppers are a reliable and efficient solution for preventing water damage in concrete structures exposed to water or moisture.      

• Material: Pvc
• Color: Black
• Sizes Available: 150 Mm Wide X 4-5 Mm Thick,150 Mm Wide X 6 Mm Thick,150 Mm Wide X 8-11 Mm Thick,225 Mm Wide X 4-5 Mm Thick,225 Mm Wide X 6 Mm Thick,225 Mm Wide X 8-11 Mm Thick,305 Mm Wide X 9-12 Mm Thick
• Jointing Method: Thermostatically Controlled Heating Or Blade Welder At 250°C
• Major Applications: Cooling Towers, CWS System,Dams, Canals, Water Reservoirs, Aqueducts,Tunnels And Culverts,Foundations,Primary And Secondary Containment Structures,Water And Waste Water Treatment Facilities

Geotextile is permeable flexible membrane a fabric like continues sheet of woven / non woven.We are leading manufacturers of PVC Waterstop and are supplying our product to Govt-semiGovt, Infrastructure projects, Power plant, Refineries, Fertilizer plant, Civil contractors and other agencies. Our product is approved by SSNL, IGNP, NTPC, EIL and other consultant of repute.PVC WATERSTOPS Our present range of manufacturing, (RIBBED Type, DUMBBELL Type and KIKER Type ) 150 mm wide X 4-5 mm thick, 150 mm wide X 6 mm thick, 150 mm wide X 8-11 mm thick 225 mm wide X 4-5 mm thick, 225 mm wide X 6 mm thick, 225 mm wide X 8-11 mm thick 305 mm wide X 9-12 mm thick. JOINTING OF PVC WATERSTOPSWATERSTOPS can be welded with a thermostatically controlled heating or blade welder which is able to adjust the heat up to 250°C for melting the PVC WATERSTOPS as following procedure: Cut Water stops ends straight and true using sharp knife or carbide tipped saw blade. Clean and lightly rough up the WATERSTOPS using wire brush. Preheat the blade welder to 250°C then apply on the cut surface of each end. Allow the PVC WATERSTOPS melt down about 4-5 mm. along each cut surface.Take off the blade welder from the cut surface and hand press neatly each cut surface of WATERSTOPS together. Then check whether the splice was done properly or not by observing no hole, no distortion and, homogeneous. When the splice cooled, observe it carefully again to make sure proper splice, then the spliced WATERSTOPS are ready are ready to be installed. All center bulb waterstop must be aligned.   Major Applications For PVC Waterstops: Cooling Towers , CWS System Dams, canals, water reservoirs and aqueducts Tunnels and culverts Foundations Primary and secondary containment structures Water and waste water treatment facilities