Ring Heaters Dealers

• Country of Origin: India
• Type: Induction Ring Heater
• Condition: New
• Application: Industrial Use
• Power Source: Electric
• Color: Green
• Automatic Grade: Semi Automatic
• Finishing: Coated
• Brand: KEJETHERM

INDUCTION RING HEATER Induction Ring Heater 75 Kva At Supply Frequency For Flanges., Starter Rings For Resizing And Stress Relieving Bearing Recesses For Expansion And Fitting.   Higher Kva (Upto 250 Kva )   Application   Include Railway Tyres

• Voltage: 230 V
• Frequency: 50 Hz
• Power: 400 W
• Phase: Single Phase
• Shape: Round
• Heater Material: Mild Steel
• Size: 74mm (Inner Dia)

• Power: 250 to 2500 watts
• Max Temperature: 650 °C
• Type: Ring Heaters
• Certification: CE Certified
• Condition: New
• Power Source: Electric
• Country of Origin: India

FEATURES Being sheathed on one side only, it has very little residual heat and stands up to 650°C temperature for its surface area. Elimination of the sheath on the contact side puts the rock hard refractory in direct contact with the heated surface, thereby providing slightly faster heat-up. Half Sheath elements can be used where the protection provided by the full sheath is unnecessary. Fully Sheathed Heaters (both sides metal) provides extra protection from rough handling & usage, especially when there are chances of falling any liquid on it.   INSTALLATION & PRECAUTIONS Always use the largest possible numbers of heaters in order to reduce the density in Watt for sq.cm. Ensure the base of the surface is flat to ensure maximum thermal contact with the heating elements. The Heaters shall be so installed so that the Ratings are easily visible when required to be replaced in case of faults or for checking after installation. The installation shall be such that Mains parts are not be exposed, easily accessible and touched by finger. Install heat insulation to avoid excess heat loss but do not back directly against the element. Use heat resisting wires for electrical connections. Protect lead exit from contaminations by electrically conductive substances, mechanical shock, excessive flexing, excessive temperature & moisture. Use crimped lugs of appropriate size and construct it so that no strands are loose. Shall be tightened with appropriate torque so that there is no loose connection.

• Type: Ring Heaters
• Material: Aluminum
• Certification: CE Certified
• Color: Brown
• Voltage: 220V
• Warranty: 1Year
• Power Source: Electricity
• Warranty: 1year
• Packaging Type: Carton Box
• Max Temperature: 700°C,150 to 250 Degree C,650 °C
• Condition: New
• Heating Capacity: 5 kW
• Temperature Capacity: 150-200C,100-150C,25-50C
• Type: Ring Heaters
• Thickness: 10-15mm,5-10mm
• Material: Steel
• Country of Origin: India
• Power Source: Electric
• Color: Black
• Length: 120-140 Inch, 50-100 Inch,6-10 Inch
• Voltage: 220V
• Power: 100 to 300 Watt, 3 Kw, 4Kw,0.3 Kw
• Size: As per specifications
• Dimensions: 10 mm, 8 mm
• Usage: Industrial Use
• Diameter: 350mm x100mm
• Automatic Grade: Manual

Electrolysis : 7 plates-Patented platinum coated 99.99% titanium Water Levels: 4 alkaline, 1 purified, 2 acidic. Cleaning : APEC(Automatic Pole Exchange Cleaning). Size Weight : 280 x 365 x 156(W,H,D)mm, 4.45kg. Voltage and Frequency : AC 10~240V, 5060Hz, 250W.

• Type: Automatic
• Material: Aluminum, Copper
• Certification: CE Certified
• Voltage: 220V
• Warranty: 1 Year
• Color: Silver

• Voltage: 12 Volt
• Power Source: Electric
• Heater Material: Silicon Rubber
• Shape: Round
• Packaging Type: Box

HS / FS Ring Elements owing to their convenient shape & sizes, adapt themselves readily to variety of machines and appli-ances for which other type of heaters are not suitable. They are being fitted for heating platens, dies of presses. They are also in use for melting of glue, wax, easily fusible metals like leads, tin, solder, hot plates, valves, flanges, brooders, vulcaniz-ers, popcorn machines, high speed packing machines, diffusion pumps, tank bottoms, kettles, large coffee percolators & wash boilers etc.   Being sheathed on one side only, it has very little residual heat and stands up to 650°C temperature for its surface area. Elimination of the sheath on the contact side puts the rock hard refractory in direct contact with the heated surface, thereby providing slightly faster heat-up. Half Sheath elements can be used where the protection provided by the full sheath is unnecessary. Chrome steel sheath on one side and edges, other flat side is the bare refractory. Coiled electric resistant wire embedded inside. And steel terminal studs with nuts and washers Fully Sheathed Heaters (both sides metal) provides extra protection from rough handling & usage, especially when there are chances of falling any liquid on it.

A conveniently shaped element for both round and square surfaces. Easily installed with standard hardware.

• Max. Watt density: 35 W/Sq. inch.
• Max. surface lemp.: 300 Deg. C.

Mica insulated Heaters consist of electric resistant ribbon round wire element covered with zinc plated MS, Brass or SS sheet with clamps. Size 8 terminal connections as per requirement.Low cost electric heating of plastic processing, rubber vulcanizing, Drums, Barrels & cylinders etc.

• Type: Tubular Heaters
• Material: Aluminium, Copper, Metal, Tungsten
• Certification: CE Certified, ISO 9001:2008
• Color: Grey,Sliver
• Voltage: 110V, 220V, 380V, 440V
• Automatic Grade: Manual
• Warranty: 1year, 2years
• Driven Type: Electric

design a conveniently shaped element for both round and square surfaces. Easily installed with standard hardware.   application            coffee urns and percolators incubators, brooders, hot plates, melting pots, dies, moulds, platens,              tanks, kettlers

• Voltage: 110V
• Frequency: 50Hz
• Power: 300W
• Brand Name: SRRE
• Usage: Packing Industries
• Heater Material: Copper

• Type: Ring Heaters
• Material: Aluminum, Copper, Galvanised, Stainless Steel
• Certification: CE Certified, ISI Certified
• Color: Black, Blue, Brown, Green, Grey
• Voltage: 110V, 220V, 380V, 440V
• Condition: New, Used
• Power Source: Electricity
• Warranty: 1Year, 2Year
• Features: Durable, Easy Installation, Eco Friendly, Fast Heating, Good Capacity, Noiseless Operation, Rustproof, Stable Performance
• Automation Grade: Automatic

Ring Type Heaters, Mica & Ceramic Band Heater, infrared radiant heaters

Ring Type Mica Band Heater

Used in electrical and the process industry, this Ring Type Heater is manufactured in compliance with the established principles of electric heating techniques. We are among the trustworthy Manufacturers and Suppliers of a wide array of Ring Type Heater, located in Meerut. Highlights : Refractory insulated sheath materialsMinimum maintenance costCustomized solutions available

ring heaters

Induction Heater for Pinion Gear Coupling Ring

Ring Heater, Cartridge Heating Element, air duct heaters

Industrial Ring Type Heater, Heat Tracer Heating Cable

ring heaters, Knife Cutter, Food Packing Machine

Ring Heater, Stainless Steel Fan Heaters, heater element

Ring Heater, Analog Input Module, washer thermocouple