Slide Gate Operator Dealers

Operates on Remote/switch, It is possible to operate this system with almost any access control system (RFID, Biometric etc) With flashing lamp for notification of gate in operation. Auto closing gate delay time adjustable. Has inbuilt battery which give 30-40 operation in case of power failure Photocell - automatic return for resistance during closing gate. It's a DC motor so the motor doesn't get heated even with intensive use With new wireless keypad the gate only operates with password set by you(optional). Automatically locks the gate and can only be operated by remote and with key provided for manual operation. With Variable Speed and force control In-built obstruction detection & Over current Setting Photocell behavior control on obstruction. Soft start / Close. Pedestrian Mode

We are Manufacturers and Installer of Sliding Gates of Length varying up to 25 mt., which can be automated by European OR Indian Gate Operator ranging between 400 kg to 6000 kg. This range is driven with the aid of gear motor built with electronic system and can be manually operated at the time of power failure. The sliding security gate offered by us varies in various weights, which is proportional to its size.

We bring forth this sly250k - 230v liftmaster automatic sliding gate operator that is specially sourced from reliable manufacturers in the markets. Designed for a flawless performance, our sly250k - 230v liftmaster automatic sliding gate operator is surely the right choice to vouch for. equipped with : sliding gate operator 250 kg with adjustable mounting platecapacitormagnetic limit switcheselectronic control2 x 3 channel remote controls433 mhz ir sensorflashing lightkey switch and external antenna

High push force High duty cycle capability Extremely rapid operating speed Intelligent and smooth speed control Multiple programmable features Optional battery backup

The Sliding Gate Operators are used to drive sliding Gates for Industrial ,Commercial and residential uses. the operators can be fitted with gear wheel or chain wheel and featured with powerful starting strength, capable of overwork at short time. In case of power failure, an emergency release key allows to operate the gate manually. Category: Gate Automation Systems

Automatic Sliding Gate Operator works as a mechanical device that provides vital support for opening as well as closing of the gates installed at the end of a driveway. We can offer these operators in hydraulic/electromechanical working support as per the operating demands of both swinging and sliding gates. Features: Technically advanced range of automatic gate operators Can also be programmed for opening/closing processes through use of wireless remote device These make use of very less voltage which makes them also suitable to be operated through support of power generated from solar panels Comes with support of battery backup for handling working demands in case of blackouts Delivers high push force as well as provides fast operating speeds Allows for quick and easy installation Delivers smooth acceleration and deceleration support Come with multiple operating features that include alarm modes Can be set up with LCD user interface  Applications: For remote operating of driveway gates

Self locking electromechanical operator suitable for residential use,24 Vdc version available for intensive use,Design that matches with any architectural stlye.

Sliding operators are designed for installation on street sliding gates. Electric motor and reduction gear are housed in a single-piece aluminium block and constantly immersed in an oil bath, preventing overheated even in case of intensive operation. Moreover the oil improves operator's performance characteristics , wear - resisting properties , and prolongs its working life.

Features safe and intelligent the nice robus is equipped with a temperature sensor which adapts the motor power to the climatic conditions. a master and slave selection can automatically synchronises two motors. This means it is possible to automate 2-leaf sliding gates set opposite each other. features obstacle detection system and automatic programming of opening times, and acceleration and deceleration can be adjusted at the beginning and end of each opening and closing manoeuvre. the robus is capable of self-diagnosis, alerting the user to faults via flashing lights. Sturdy, practical and user friendly the control unit and backup battery (optional) can be connected by means of a simple connector and can be housed directly inside the motor. the robus's gear motor is on bearings, resulting in very quiet operation the nice blue bus system enables the user to power and control a maximum of seven sets of photocells (from the moonbus series) using two wires only. nice robus gate openers 24v sliding gate openers - max gate leaf - 12m (see below) - max gate weight- 1000kg (see below)

Automatic Sliding Gate Operator works as a mechanical device that provides vital support for opening as well as closing of the gates installed at the end of a driveway. We can offer these operators in hydraulic/electromechanical working support as per the operating demands of both swinging and sliding gates. Features: Technically advanced range of automatic gate operators Can also be programmed for opening/closing processes through use of wireless remote device These make use of very less voltage which makes them also suitable to be operated through support of power generated from solar panels Comes with support of battery backup for handling working demands in case of blackouts Delivers high push force as well as provides fast operating speeds Allows for quick and easy installation Delivers smooth acceleration and deceleration support Come with multiple operating features that include alarm modes Can be set up with LCD user interface  Applications: For remote operating of driveway gates