Solar Controller Dealers

We are staffed with professionals and under their guidance; we keep a close check on the products and ensure that the range is as per the exact customers' requirements. We, along with our veteran packaging professionals, ensure that the packaging products commence keeping the packaging guidelines in consideration. We strictly use quality packaging material to evade loss during transit.

MPPT solar controller, maximize the utilization of solar panels, utilization ratio>95% . Modular design, hot plug function, flexible configuration, easy capacity expansion Intelligent battery management and temperature compensation function   FEATURES MPPT solar controller, maximize the utilization of solar panels, utilization ratio>95% Modular design, hot plug function, flexible configuration, easy capacity expansion Intelligent battery management and temperature compensation function Complete protections e.g. Input and output over voltage, polarity counter-attack protection, lighting surge protection, etc. LCD display + LED status indicator RS485, dry contact communication to realize remote monitoring Automatic ON-OFF

We are engaged in trading and supplying a broad range of Solar Charge Controllers. These are used amongst the patrons a throughout the country. We offer these products in safe and durable packaging to ensure their correct delivery to the customers. Our products are available as per the industry standards and are reliable too. We provide products after checking them on several norms. These are made by using qualitative raw material, which is acquire from well known vendors in order to meet the set quality standards. These are provided at reasonable rates as per the given specifications.

General Technical Specifications Voltage Range: 6/ 12/ 24/ 48/ 96/ 110/ 120 Volts D.C Charging Currents Range: 6/ 10/ 20/ 25/ 30/150 Amperes Load Currents Range: 2/ 6/ 10/ 20/ 25/ 30/ 150 Amperes Features: Reverse polarity, Battery deep discharge, Battery overcharge

Keeping in compliance with the international quality standards, the raw material used to manufacture the product is of high quality due to which we are capable of delivering only quality products. Solar charge controllers have controller protect against over-charge, over-discharge, over- current, short circuit etc. Customers can provide their specifications to us in regards to the packaging of the products as we serve customized packaging requirements. We ensure damage-free products at customer's end.

The Solar Charge Controllers, provided by us, are known for their quality. We have most up-to-date machines and cutting-edge technologies to make sure that the products are packed accurately. This assures that the products are safe from the external damaging factors. You can rest assured us for the safest and superfast deliveries of the product range that we carry out in the dedicated time frame.   Product Code : 111134

A solar charge controller helps in charging battery using solar energy collected by solar panels. Mppt charge controller generates approximately 25% more power as compared to pwm charge controller. All our solar charge controllers have been designed indigenous in our r&d lab for indian conditions and offer unique features at affordable prices. Pwm solar charge controller: - designed and made in india - 12v 24v auto-select - upto 20a charging current for 12v or 24v battery bank. Max dc load 20a - battery specific charging for flat plate battery, tubular battery or smf battery - high efficiency design - upto 98.8% efficiency - can convert your ordinary home inverter to a solar inverter using power saver box - battery charging status indication led battery connectedchargingchargedlow - 3 stage battery charging - boost absorption trickle charging mode - reverse polarity protection with indication led - for battery and pv panel separately - battery overcharge protection - rugged, compact and attractive product design

Su-Kam’s MPPT Solar Charger Controller is a system with advanced MPPT (Maximum Power Point Tracking) Technology. This photovoltaic charge controller is the key component in off-grid or stand-alone solar power generation systems. It can track the maximum power point and transfer energy to various types of batteries. The build-in MPPT microprocessor enables the Solar Charge Controller to increase the energy transfer efficiency by upto 30% compared to traditional charge controllers. Easy installation with parallel connection capability makes Su-Kam MPPT Solar Charger Controller the perfect solution for your home as well as any large solar system application.

Solar Charger Controller also regulates the rate at which electric current is added to or drawn from batteries. It prevents overcharging, over and variable voltage which if not controlled can reduce battery performance or life span and may pose a safety risk. It also prevents complete drainage (”deep discharge”) of a battery and facilitates controlled discharge thereby maintaining the battery’s longevity. Equipped with Micro controller and Digital Signal Processing (DSP) technology Solar Charger Controller is fully protected against transient over voltage and reverse the current flow, and can charge any type of battery.  

We are engaged in providing high quality Solar Charge Controller from 2A to 80A. We have tie up with a Germany based company manufacturing Solar Charge Controller. We also supply Indian made charge controller. Our MPPT solar charge controller is highly in demand which increases the output of panels by 30%. Features : DurableEco-friendlyHigh performanceEconomical price

Luminous Charge Controllers are PWM based controllers with 98% efficiency. It has option of USB charging & dusk to dawn feature. It comes in ratings of 6/10/20Amp. Electronic & Software controlled protections. Maintenance Free. USB Mobile charger Output. Option of SMF and Lead Acid Battery selection. Features Automatic selection of 12v/24v battery Aesthetic & compact design 98% efficiency Fuse-less electronic & software controlled protections USB port Option of SMF and lead acid battery selection Load controller with LVD & dusk to dawn feature Technical specifications PWM based technology Automatic battery voltage selection of 12/24Volt (Available in 10amp & 20 Amp) In built low voltage disconnect (LVD) & 20% extra power than rated capacity 125 Watt panels in 12 system in 6Amps ; 200Watt & 400Watt panels in 12/24Volt system in 10Amps 400Watt & 800Watt panels in 12/24Volt system in 20Amps

The SPPL-PS1224 is suitable for small business, commercial and residential installations.  The Panel capacity can be up to 800W for a 12V system and up to 1600W for a 24V system. The Power Steering automatically detects the system input voltage when the battery is connected.  Note:  The battery must be connected first and then the Solar panels. Convert any UPS/Inverter to a Solar PCU by adding this as a card inside or a box outside. Only unit in India with all power parameters being displayed on a LCD. Only unit in India where you can customize the LCD display to show your name – make it your own product and brand. Can be programmed by a USB dongle by inserting it into the LCD connector on the board. Simple terminal program with simple instructions make it very easy to customize

Presenting State of The Art IOT based Solar Charge Controller. Ideally suited for remote Battery operated installations. Using modern technology this charge controller is 100% user programmable for battery charging, remote data monitoring and connectivity parameters. Built-in LCD Display shows all the necessary parameters related to electrical data and performance. Unique energy management algorithm ensures minimum idle current and longer battery back-up and life. Remote monitoring ensures complete management control over operation, maintenance and quality of service. Salient Features: Available in PWM and MPPT Configurations. Single Board Design with Built-in IOT Controller. Wireless connectivity for IOT Configurations (SSID & Password) All Battery Charging Parameters – User Programmable Wireless interaction between Controller and User 16 x 2, Alphanumeric LCD Display Site/ performance parameters directly uploaded on remote web server. IP55 Outdoor duty, Light weight and Corrosion free enclosure Option of Built-in Li-Ion Batteries Very Low Idle Current, Excellent Battery utilization Ideally suitable for Solar Home Lighting, Solar Street Lighting, rural infra projects. Available in 12 V and higher voltage ratings. Suitable for any battery chemistry, Lead Acid, Tubular, Li-Ion, Li-Fe-PO4, Ni-Cd.    

Due to our secure and hassle-free payment procedures, clients stay satisfied with us. We undertake both online and offline payment processing methods including cash and bank transfers. The offered lot is in complete compliance with the industry standards thus, high in demand.   Protections Soft Start Reverse Battery Battery Overcharge & Undercharge Over Voltage Over Current Thermal Overload   Feature Supports solar panel up to 100W Support 12V battery up to 100Ah More than 80% efficiency when driving LED from battery Microcontroller based single board solutions for up to 20W solar street light Dusk to Dawn operation which makes this unit completely autonomous Proprietary charging algorithm to optimall charge battry to maximize solar power utilization 50% dimming after 6 hours (Optional)

3000-12, 5000-24, 6000-48, 8000-48 The basic functions of the combined inverter of the Steca Xtender series are the inverter, the battery charger, the switching function and the support of external sources of alternating current. These functions can be combined and controlled fully automatically, the range offers outstanding user-friendliness and very good exploitation of the energy available. All the settings of the Steca Xtender XTH can be remote controlled. When a software with new functions is available, it can be loaded into the system, so the Steca Xtender XTH always stays up to date. Several Steca Xtender XTH can be connected in parallel or to form a three-phase system. That means that up to nine Steca Xtender XTH can work together. Multifunction contacts These potential-free contacts can be programmed for many different applications. They can react to any event outside or inside of the inverter (grid availability, battery voltage, fault message ...) They can also be programmed on a timer or can be switched on during particular times (at night, at the weekend ...). In this way, they can serve to start up a generator, to switch off less important loads, to signal a fault, to charge batteries depending on the situation, etc. Smart-boost function With the smart-boost function, the output of another source of alternating current, such as a power generator or a land connection, can be increased; even when special loads are being used (inductive, asymmetric, with high switch-on current). It is also possible to combine the Steca Xtender XTH with almost all inverters which are already present in order to increase the available output.

We are offering grid interactive solar charge controllers. Geesys string combiner boxes are ideal for land-based solar photo-voltaic (pv) applications and systems, which require dc source-circuit combining, fault & over-current protection and circuit monitoring. The standard product allows for grouping of 8,16 or 24 pv strings and is ideally placed between the pv source and inverters. These combiners can also be customized as per the requirements specified by the clients.