Solar Sensor Dealers (35 products available)

FEATURES Small size and short response time Cost effective RoHS compliant Halogen-free series are available Customized cable lengths, R/T characteristic and connector is on demand Customised cable Type And Size   RECOMMENDED APPLICATIONS Battery Notebook, PCs Fan Electronic devices Automotive Ambient and Engine side Temp. Measurement

We are offering solar radiation sensor. our solar radiation sensor is widely demanded in national and international markets as it delivers accurate results in every use. The solar radiation sensor, provided by us is made from high grade components due to which it is durable and highly efficient. ideal forshortwave radiation

We offer a variety of payment methods to our customers so that they can pay as per their convenience while focusing on the core trade. We are a noteworthy name, engaged in offering qualitative lot of products that are the perfect outcome of premium material and modern work methods. Also, the material is sourced from the trusted places after complete quality checking.

Solar sensor a gradual performance decline when deployed outdoors and exposed to environmental conditions.The evaluation systems are designed to measure the performance characteristics and maximum output power of solar cells and modules.

This sensor measures the temperature of photovoltaic modules. To do this, the self-adhesive temperature sensor is attached to the rear of a module. A PT 100 thin film temperature sensor that is supplied with a 2 m long connection cable (wire: 7 × 0.2) is located in the silicon rubber plaster.The signal for the Powador-proLOG is produced by the temperature converter PXT 10. The line resistances between the temperature sensor and converter are compensated. We also recommend a 230 V AC supply for the Powador-proLOG to relieve the internal power supply of the data logger.

• Length: 600mm 1200mm 1200mm
• Silence power (adjustable): 2.5W 5W 6W

New technology, sensor and smart IC are integrated inside tubes, no need additional ballast. Special internal isolated power driver design, high watt available(25W), adjusted in delay time, sensor area, Min watt. 100% high voltage- resistance test, more safe. No ambient temperature nor noise interruption like PIR or voice-controlled, sensor area at least 10m. Special gridding circuit design, any individual LED failure will not cause other LEDs working

The Solar Radiation Sensor provided by us measures global radiation, the sum at the point of measurement of both the direct and diffuse components of solar irradiance. The Solar Radiation Sensor provided by us has a transducer which converts incident radiation to electrical current and is a silicon photodiode with wide spectral response. Solar Radiation Sensor also integrates the irradiance values and displays total incident energy over a set period of time. The outer shell shields the sensor body from thermal radiation and provides an airflow path for convection cooling of the body, minimizing heating of the sensor interior. It includes a cutoff ring for cosine response, a level indicator, and fins to aid in aligning the sensor with the sun’s rays. The space between the shield and the body also provides a runoff path for water, greatly reducing the possibility of rain or irrigation-water entrapment. The diffuser is welded to the body for a weather-tight seal; it provides an excellent cosine response. The transducer is a hermetically-sealed silicon photodiode with integrated amplifier. Spring-loaded mounting screws, in conjunction with the level indicator, enable rapid and accurate leveling of the sensor. Each Solar Radiation Sensor is calibrated against a secondary standard Pyranometer in natural daylight.

• Range: 0 Wm-2 to 2000 Wm-2
• Accuracy: +/- 5 %FS
• Resolution: 1 Wm-2
• Calibration Traceability Offered: WRR, IMD

The KDS-051 Sensor measures solar radiation based on a photodiode. A cosine corrected diffuser mitigates angular sensitivity of the sensor and gives it an angular response flatness commensurate with the accuracy within a wide field of view. Leveling arrangements are part of the sensor including a built-in spirit level. The sensor is direction insensitive and responds to the total global radiation. The range of the sensor – from 300nm to 1000nm - covers a major part of the shortwave radiation that reaches the ground. The measurements are used in the agricultural, meteorological, and hydrological fields.     Features   High signal output (200 mV at full sunlight) Compatible with a wide range of data loggers Minimal low-light offset errors Averaging for stable readings Automatic internal electronics calibration Stores individual sensor calibration Digital and analog outputs supported Suitable for continuous outdoor use

For Global RadiationISO classification second classSpectral range 305 - 2800 nmSensitivity (nominal) 15 µV/ W.m-2(Each Sensor is calibrated separately)Temperature range -40 - +80 °CRange 0 to 2000 W.m-2Temperature dependence < 0.1%/°CCalibration traceability WRR          

We are manufatcurer and supplier of Solar Radiation .Our Sensor is one of most realible in the sensor market filed.We have muti type Radiation Sensor such as pyranometer for Global Raditaion,4 Component Net-Raditation Sensor etc.. which are used for measuring different type of raditation.

• Type: Solar Sensor
• Application: Industrial Use
• Plastic: Metal, Plastic

• Application: Industrial
• Color: Black

• Range: 0 to 2000 W/m²
• Accuracy: ± 5%
• Resolution: 5 W/m²

Solar Radiation Sensor is an ISO-second-class pyranometer that monitors solar radiation for the full solar spectrum range. It connects directly to a YDH-1 RTU, and is used for many meteorological applications.

We hold expertise in offering a huge assortment of Solar Radiation Sensors in the industry. The Solar Radiation Sensors that we offer are manufactured with the use of sophisticated and modern tool and technology. Further, these Solar Radiation Sensors are easily available in various compact designs. Features: Excellent service life Fine quality Great output

• Operating Temperature: -40 deg to +65 deg C
• Supplied Cable Length: 2 Inch 
• Cable Type: 4-conductor, 26 AWG
• Material: PVC plastic

Solar integrated street light or all in one street means all items like Solar panel,Charge controller,battery,LED module & motion sensor are housed in a single unit.The solar panel receives the solar energy during day time and this energy is stored in the Lithium-Ion LifePO4 battery through the charge controller,This is an intelligient charge controller connected with the IR motion sensormicrowave sensor.which is pre programmed according to customer's demand before delivery.

20w Solar wireless security motion Sensor LED, Led Flood Light 30 watt

Solar Radiation Sensor, Humidity Temperature Controller, Altimeter