Square Cooling Tower Dealers

VARUN square type cooling towers work on the principle of counter flow. This means that the water flows down while the air is pulled upwards by a fan. As the water flows further through the system, the air encounters is fresher, in other words cooler and less saturated with moisture.Direct access to internal parts providing easy maintenance and repairs, which is negligible. All materials in making VARUN cooling tower are completely resistance to corrosion and chemicals. It is light in weight and thus permits roof installation without any special reinforcement. A direct driven axial flow fan ensures the system free from problem faced with belt and gear drives.

The FRP Square Cooling Tower, which we offer, is manufactured as per the set industrial standards. Also, we undertake repairing and revamping services of any type of FRP Square Cooling Tower. We offer these FRP Square Cooling Towers at competitive rates to the clients. Highlights Operates on the induced draft counter flow principle operationThe fan creates air movement vertically pulled upwards on tower across the fills in opposition to the water flowHot circulating water enters the water inlet headers and sprays through non clogging PP spray nozzleEven Water distribution Well-designed PVC Drift Eliminators are fitted Reduces Drift LossesHas an Inspection Door Allows easy access for inspection and maintenanceSquare tower can be installed in multi cell also Cooling Tower Capacity : Ranging from 5TR to 600 TR in Single cell and as per requirements of client in multi-cells. Benefits Compact design, corrosion resistant and lightweightDurable service LifeMaintenance freeHigher efficiencyMinimum drift loss of waterNo contamination, due to dust or foreign particlesPiping cost negligible and suitable for small unit Assembly FRP Casing : Cooling Tower Casing is made of selected grade materials of tough Fiber Glass Reinforced Polyster and resins etc. An additional embossing is provided for extra strength of large Cooling Towers.Header Pipes : The header pipe designed for proper distribution of water over the FILLS so that proper contact time for air to water is achieved. The header pipe is manufactured in G.I., P.P. with FRP moulded construction which makes it Non Corrosive Type & Long Lasting.Water Distribution Nozzle : We are offering low pressure drop, non-clogging, ABS make solid cone type nozzle for distributing the water on the fill pack area. Each nozzle is designed to operate on a water fluctuating load as good as 20%. Each nozzle can cater the service area of 1.2m x 1.2m at an inlet pressure of 0.3 kg. Per cm.sq.Drift Eliminator : CCS Drift eliminators, to reduce carry over losses through of moistures drop in the air stream. The individual drift eliminators of s-shaped corrugated sheets are bonded with subsequent layer to creat the structure.PVC Honeycomb Fills : PVC Honeycomb type fills having extended contact area. Splits incoming air and water into several streams spread evenly across the water cross section increasing heat transfer rate easy to replace.

We have developed expertise in offering a comprehensive range of Square Shape FRP Cooling Towers is manufactured in line with international quality standards, which cater to the needs of various industries. Our range of cooling towers helps in cooling re-cycling the water flow, from 10 M3 Hr. to 500 M3 Hr. Square shape cooling towers available with us are latest technology based square shape cooling towers that are fabricated using superior quality raw material. Offered at competitive prices, square shape cooling towers are ideal for multi cell option and have complete FRP casing that ensures optimum protection of the body of the cooling tower. Square shape cooling towers cool the re-cycled water. The towers blend easily with architectural surroundings, giving a unique aesthetic appearance.

We have a team of quality inspectors who check an entire lot of raw material on several counts, prior to procurement. Thus, quality of the finished products is never fortified. With the assistance of sophisticated packaging system and adroit professionals, we are able to provide a flawless lot of products as we ensure complete safety during packaging. Square FRP Type Cooling Tower has a sturdy body with high dimensional precision and a long service life. 

The square Cooling Tower is of the design: vertical induced draft counter flow, with a uniform distribution of water and an optimal transfer of heat .These are utilized by all large industries in order to cool the water that has undergone recycling. The installation of Cooling Tower can be done independent of the direction of wind. Cooling Towers are nothing but heat rejection devices that are used to remove unwanted heat into the air from the cooling stream of water to a reduced temperature Square Cooling Tower Capacities Square Cooling Tower gives 100% Cooling efficiencies and it gives good appearance, flow rate from 5 M3/Hr To 11000 M3/Hr gives differences in temperature 4°C To30°C Availability of Capacities from 5 TR T0 1000 TR in single cell Features Cooling Tower Maintenance The flow of water ranges between 5 M3/Hr To 11000 M3/Hr The design easily blends with the architectural environs The casing of the same is of tough Fibre Glass Reinforced Plastic (FRP).It posseses sufficient structural power to endure winds of high velocities as well as vibrations. Besides Gel coat, an ultra violet stabilized resin is also used for extended life. The square Cooling Tower is resistant against local impacts and local repairs could be easily done in case of occurrence of slight damages A temperature difference from 4°C To30 °C can be ensured It uses less energy on the whole due to minimal resistance of air to water Nozzles are designed easy cleaning while running the square shape Cooling Towers Applications Of Square Cooling Tower In cold rooms and air condition plants Aluminum Die casting Dairy industry Chemical industries In food industries such as hotels as well as in industries of Food Processing Oil refineries Automobile industries Forging and Mechanical industries Plants manufacturing glass Also employed for mega watt project industries' heat process By plastic moulding machineries

Backed by a team of proficient quality inspectors, we provide only quality assured products to the customers. We are working with highly experienced packaging experts and they make every endeavor to meet the personalized and standard requirements of the clients. We sternly make our product safe from external factors.

We are well-reputed as one of the preeminent Square Shaped Cooling Towers Manufacturers in India. The Square Cooling Towers, offered by us, are designed to meet the applications of various industries. The Square Cooling Towers are efficient in cooling the re-cycled water flow ranging from 10 M³/ Hr. to 500 M³/ Hr and also show the different in temperature that may vary between 4°Cto 30°C. Moreover, the FRP Square Cooling Towers are easy to operate and requires low maintenance cost.

We bring forth a comprehensive range of FRP Square Type Cooling Tower, which is made by using the finest quality fiber reinforced plastic. Our FRP Square Type Cooling Tower is widely used in Air-Conditioning Plants, Chemical Plants and so on. For enhancing the performance of FRP Square Type Cooling Tower, we atomize hot water & eject it through the nozzle and thoroughly mixed with air. Moreover, due to its better cooling efficiency it is highly demanded by our clients. Highlights Fixed PP non clog type virgin quality nozzle atomized (sprays) the hot water broken into smaller particles there itself cooling takes place No such Hassles No moving parts Nozzles are of virgin materials Drift eliminators made out of PVC honey comp structure in construction packed tightly above the nozzle areaIt gives smooth path to the air flow It helps in restricting the water vapor carry over with hot airIt results in evaporation loss will be much lesserBetter cooling efficiencyAtomization of hot water spread evenly at the same time through the fills area with the help of no of nozzles fitted in the branches from the main manifold.

We are engaged in manufacturing an array of tower casing that is constructed from qualitative frp molded panels that is suitably flanged. The joints are sealed with waterproof compound and bolted together with galvanized steel bolts or stainless steel bolts for a better result. We also do additional embossing for providing more strength.

Our company is engaged in manufacturing a qualitative range of   FRP square type cooling towers  Which are offered to industry for process cooling . These are demanded by the users of process coolers, diesel engine, machine and air-conditioning plants.   Benefits: Compact design, lightweight and corrosion resistant Minimum drift loss of water Piping cost negligible and most suitable for small industrial unit Durable service life Aesthetic design Maintenance free Higher efficiency (rate of cooling) No contamination, due to dust or foreign particles The fan and the tower body specially designed to reduce noise Checking up and maintenance jobs simplified Unique mechanisms are applied to water distributing section. No moist formation water is distributed in the form of drops The tower utilizes corrosion-proof high efficiency fill The water collection sump of FRP is leak proof and avoids water spillage The 'Bottle' type design is highly resistant against strong wind   Capacity: 5 Tones to 600 Tones in Single Cell/Multiple cell.

manufacturing of FRP square type cooling towers which are offered at suitable prices. Demanding users of Square Cooling Towers are diesel engine, process coolers, machine and air-conditioning plants & D.G Set ect. The FRP square type Cooling towers we offer have fixed targeted nozzles in the hot water basin. They are designed meticulously for water distribution and are highly resistant to temperature and weathering. The use of targeted nozzles eliminates the need for separate diffusion deck. These FRP square type cooling towers are preferred for minimum drift losses, easy accessibility of internal components, high thermodynamic efficiency and low power requirements. Easy to maintain, these FRP square type cooling towers can be installed on roof tops.   Material Selection All specification for this model are same as that of round bottle shaped cooling towers, although the sprinkler are replaced by nozzles in this model. These fixed targeted nozzles are used in the hot water basin. They are specifically designed to deliver the required water distribution and are highly resistant against temperature and weathering damage. The use of target nozzles also eliminates the requirement for separate diffusion deck, which is otherwise required to provide complete water distribution throughout the fill area. These nozzles operate under gravity with utmost precision.

The Square Shape Cooling Towers designed especially for an alternative to round model for selection to our buyers. The Cooling Towers  consists of Virgin Honey comb PVC fills and eliminators in a design that maximizes economy and efficiency & directly driven fan & Motor with spray Nozzles 'Minimum drift Losses. Hot dipped Galvanized hardware with rectangular casing body in elegant design. Square Shape Cooling Towers s/Rectangular shaped Cooling Towers that performs under induced draught counter flow principle for the operation. The hot water enters through hot water inlet that passes through perforated branch pipes, which distributes the water by the splash caps evenly. This water is spread over the heat exchange fills. Then, the water flows downward as a thin film through the fill in direct contact with ambient air moving upwards in a counter flow direction. Water cooling is affected by heat transfer in the form of convention and evaporation. Drift eliminators are mounted above the water distribution, to prevent carryover of the droplets by the fan. Drift loss is controlled by the drift eliminator to less than 0.02 % of water in circulation. High flexibility is introduced by multi-cell cooling Towers that can be customized to meet individual cooling requirements and conditions. The design further assures a high level of availability.  

The Square Shape Cooling Towers designed especially for an alternative to round model for selection to our buyers. The FRP consists of Honey comb PVC fills and eliminators in a design that maximizes economy and efficiency and directly driven fan and Motor with spray Nozzles ‘Minimum drift Losses. Hot dipped Galvanized hardware with rectangular casing body in elegant design.