Suction Strainers Dealers

Suction Strainer is fitted with Suction coupling at one end of suction hose and used for filtaration of water so that clean water passes through Suction Hose Pipe. Sizes available 3”(75mm), 4”(100mm), 51⁄2”(140mm)

A complete range of Suction Strainers suitable for flows from 15 LPM (3gpm) to 450 LPM (100gpm). The standard filtration is upto 125 microns. The construction incorporates a stainless steel filtering media with a steel back-up perforated sheet held together with free flow epoxy bonding material.

We have hired a team of professionals who hold immense knowledge of packaging. They make use of premium packaging material so as to make damage free deliveries. We have a team of professionals who work in assistance with the clients and guide them with the secure payment procedure. With us, clients can do online and offline transactions as per the convenience.

We are engaged in offering a wide range of Suction Strainer to the clients. Suitable for installation in the suction ports of the pump or submerged in the reservoir and attached to the suction line leading to the pump, our range of Suction Strainer is used to protect the pump from large particles found in the reservoir. These types of Suction Strainers are usually considered as coarse mesh filters or even magnetic separators. As high differential pressure can cause pump failure, high-efficiency filters are not placed on the suction side.Replaceable core filter-drier of Suction Strainer is used for CFC, HCFC and HFC refrigerants for use in large commercial air conditioning and refrigeration systems. Our Suction Strainer has unique internal hardware for hassle-free installation, powder coating paint finish on exterior, sturdy steel shells for long life, solid MS fitting, 100 mesh outlet screen interior & exterior body with special chemical treatments to prevent rusting.Applications : Petroleum-based hydraulic fluids Phosphate esters Water glycols Coolants Lubricating oils Fuels and water in fluid reservoirs Sumps and similar applications Automobile Molding and allied engineering industries Specifications Flow Rate Suction strainers are available from a flow rate of 5 to 250 lpm. Nominal Particle Rating Available from 10 microns to 150 microns filtration rating Filter Media Stainless steel wire mesh and perforated steel core. Sealant Epoxy based Sizes Custom Build sizes are offered Operating Conditions Filter can withstand temperature up to 120oC. Filter is washable or can be cleaned by applying air pressure and re used.

We are one of the most considerable manufacturers and exporters of Suction Strainers who has evolved in the highly competitive market and offer you its exclusive range of products at very reasonable prices. These are being fabricated in compliance of industrial quality standards by our skilled technocrats. It can also be customized as per the stated specification of our various industrial customers. A wide spectrum of suction Strainers are widely demanded by the various leading industries. Suction Strainers manufacturing company is widely renowned for their best quality products.   Suction Strainers Available from 50 to 200 Microns

Reusable SS 100 mesh / 149 micron std Aluminium die cast nut Steel cap / support tube Continuous epoxy bond Suitable for hydraulic/mineral oil Max. Working temp. 80oC     Amco Filter Suction Strainer Elements are designed for installation into suction lines of pumps. Extra caution should be taken to ensure that the suction elements are always mounted below the minimum oil level of the reservoir. Standard models have nominal filtration ratings of 74 or 125 microns. The suction strainer elements can also be supplied with a bypass valve to reduce high pressure drops caused by contaminated elements or high viscosity fluids during cold starting. The bypass valve opens at 3 psi. For best results, suction strainer elements should be sized for clean element pressure drops off no higher than 0.5-.07 psi.Amco Filter suction Strainer Elements are manufactured using stainless steel wire screen media. Suction strainer elements are only intended to protect hydraulic pumps against catastrophic failure caused by coarse contaminants. Suction strainer elements should be inspected and cleaned regularly. Suction strainer elements should not be used as the only filtration elements in a hydraulic system. Pressure filters and return line filters, with reasonable dirt holding capacity, must be installed to provide protection against component damage caused by fine contaminants.

Suction Strainer Gunmetal 4” having Female Round Thread as per IS:907 (Also available in 3”)   Also available in standard quality

These are mainly installed within the tank before the suction pump and thus the name. These filters are mainly used to protect coarse contaminants from entering into the system, which have not been filtered elsewhere. These are wire mesh filters and thus can be used again after cleaning during the shut down of the machines or systems. These come with standard sizes and standard micron rating, but we can always manufacture products of odd sizes for our customers with micron rating down to 5 microns. Characteristics: Flow capacity ranges from 15 to 600 LPM. Cost efficient end caps made up of ABS material. MOC of wire mesh can be S.S. 304 and 316 both. Working temperature range -20 to +100ºC. Micron rating 149 (standard) and can go down to 5 micron.