System Analyzer Dealers

Measuring trace metals in water, soil and food has always been a vital part of modern environmental monitoring.Voltammetry offers an internationally accepted alternative to laboratory analysis or automatic samplers. Modern Water’s PDV6000 ultra provides better on-site characterization, with pollution hot spots and contamination sources more easily identified.Key Features : Multiple, sequential metal analysis when using VAS AC or rechargeable battery for onsite use Pre-treatment methods of acid/UV digest to eliminate interferences Solid-state robust electrodes and stand provided. Detection limits below 1ppb, (depending on sample) Report generation capability with VAS software.

Autonomic neuropathy is a serious and common complication of diabetes. In randomly selected cohorts of asymptomatic individuals with diabetes, about 20% had abnormal cardiovascular autonomic function. Reduced heart rate variation is the earliest indicator of cardiovascular autonomic neuropathy. The increased prevalence of painless myocardial infarction in diabetes has been attributed to autonomic neuropathy. Damage to autonomic nerve fibres from the myocardium of patients dying from painless myocardial infarction has recently been reported.It has been recommended that testing of diabetic individuals for cardiovascular autonomic dysfunction should be part of their standard of care. Noninvasive tests are suitable for routine screening for autonomic dysfunction or for monitoring the progress of autonomic neuropathy. When performed in a carefully controlled manner, the following tests have been validated and shown to be reliable and reproducible : Test of Heart-rate control Heart-rate response to deep breathing, and standing and Valsalva maneuver Blood pressure responses to standing and sustained handgrip Features : Analyses Sympathetic and Parasympathetic Autonomic Nervous Function Simple array of (one minute) six tests completes the Comprehensive study Fully automated NIBP kit enhances the BP measurements Display of raw ECG and heart rate(HR) histogram supports the diagnosis Needs a Windows XP/7/8/10 enabled computer to perform Two full A4 page patient report with ECG, HR Histogram and BP values Resting ECG with HR Deep breathing ECG and Expiration and Inspiration Ratio Supine to Standing ECG and 30:15 ratio Valsalva Maneuver ECG @ 40mmHg pressure and Valsalva ratio Postural Hypertension resting BP, BP immediately after standing and BP after one minute standing are measured to assess the fall in systolic BP Sustained Hand Grip BP before handgrip and after 5 minute of hand grip is measured to assess the increase in diastolic BP Final impression consists of Parasympathetic function, Sympathetic function and Cardiac Autonomic Function   Product Code : CANS504

Applications include: Total sulfites in foods, dissolved SO2and H2S in amine scrubbing solutions, and sulfites in geological materials and wallboard.   The CM440 Total Sulfite, SO2/H2S Analyzer is a complete analytical system allowing the direct measurement of total sulfites or dissolved SO2/H2S in a wide variety of sample matrices and concentrations. Combining a automated, self-contained unit for the acidification of a sample (to evolve SO2 and/or H2S), with a highly sensitive SO2/H2S detector, the CM440 easily handles solid or liquid samples with concentrations from ppm levels to 100% without user calibration. UIC’s analyzers are rugged, accurate and adaptable to most applications. They are used extensively in industrial, research and educational laboratories worldwide. The CM440 system includes the following components pictured above:   CM5014S SO2 Analyzer   No user calibration Wide, linear dynamic range Readability to 0.01 µg Sulfur User selectable display units Floppy disk drive for archiving data   Instrument Capabilities A major advantage of the CM440 Total Sulfite, SO2/H2S Analyzer is the use of coulometric detection. Employing the principles of Faraday’s Law, the CM5014S SO2/H2S Analyzer automatically measures the absolute mass amount of sulfur dioxide and/or hydrogen sulfide evolved from an acidified sample. No user-calibration is required and linear detection is available from less than 1 µg sulfur to over 10,000 µg sulfur. Using this 100% efficient coulometric process, relative standard deviations of 0.2% or better are common for standard material. For smaller concentrations, an absolute deviation of approximately 1 µg S is typical.

Aic is one of the leading manufacturers and suppliers of high quality and competitively priced, state of the art technology gas and water analysis systems. We bring to you the best and latest in analysis systems, collaborating with fuji electric japan, ic controls canada & bieler + lang germany. Simple works the best is fully exemplified by popularity of fuji zrjzre microflow sensor based ndir analysers. We are an nsic registered iso 9001 accredited unit manufacturing gas analyser systems in technical collaboration with fuji, electric japan. The analyser sample handling systems are designed based on more than three decades of experience in the manufacture of analyser systems and our experience of installations in diverse areas.we keep the design of the system as simple as possible at the same time ensuring that the pre-conditioning of the sample to remove dust and moisture is adequately taken care of. This ensures easy and reliable operation and maintenance of our analysis systems. Aic has more than 500 analyser installations in last 12 years of operation with more than 300 fuji analyser installations in last 6 years in cement, steel, power, fertiliser and petrochemical companies. our co analyser systems were exported last year to kazakhastan for a cement process application and previously to countries like korea, congo, nigeria through indian companies for incinerator, chemicals and steel process applications.

The Model CA 2000 Series Multi Gas Analyser Is Suitable For The Continuous Measurement Of The Concentrations Of Gases Such As CO, C02, S02, NO, 02, CH4, H2. Maximum Four Of These Components Can Be Measured In The Analyser The Simplicity Of Operation Makes Endee Gas Analyser A Valuable Aid For Continuous Use In Various Applications Changing The Measuring Parameters. It's Versatile Modular Design Permits Configuration and Up-Gradation to Suit Specific of Gases to Be Measured. Needs of Customer in Selection Optionally Lndee Ca 2000 Is Available With Highly Up-Gradable Microprocessor Based Llectronics Which Is Lquipped Willi Ballery Backup For Ram To Retain The Existing SeL Modes In Case Of Power Failure. Any Unacceptable Deviation From The Standard Stored Values Is Displayed As An Indication "Fault", Custom designed sample conditioning system Application specific principle of Analysis Infrared & Electrochemical detector for CO and C02 & NOx, HC. Electrochemical/paramagnetic or zirconia detector for 0 Hydrocarbons & Hydrogen Heated stack mounted filter optional Automatic calibration Built in printer. (Optional) Multipoint sampling system. (Optional) RS-232/485 output for data. logging and further analysis.(Optional)

Open system Single Channel Coagulation analyzer Dual Detection Principle Half volume reagent Automatic starting and stopping timer Continuous mixing with stirrer  rod Automatically calculates INR Stores Calibration Curves with up to 9 points

I-V curve test for solar system Max. solar system power (Pmax) search by Auto-scan: 1000V, 12A (12000W capability)The analyzer and the Remote Solar Detector is connected by Bluetooth wireless communication Intelligent test logic with no personnel attendance required in the field Max. voltage (Vpm) at Pmax; Max. current (Ipm) at Pmax) Voltage at open circuit (Voc); Current at short circuit (Isc) Efficiency (%) calculation of solar system Temperature measurement of solar panels Irradiance measurement of sun light Series resistance (Rs) calculation of solar panels I-V curve with cursor to display each data pointWith data logging/open function, the I-V curves of solar system can be analyzed/recorded for a period of time (e.g. 60 min.)Conversion of I-V curve under OPC to data under standard test condition (STC) based upon IEC standardProvide Operating Condition (OPC) and Standard Test Condition (STC) test reports for verification of solar panel performance (OK, or NO OK) Users can set up the parameters of solar panels; users can set up the series numbers of solar panels Irradiances & temperatures of solar panels can be continuously measured, monitored and recorded Built-in calendar clock Rechargeable lithium battery; AC power adaptor Optical USB cable for PCWith OPTIONAL power clamps (SOLAR 15 DC Current Probe and SOLAR 21 AC Power Clamp), continuously measure/monitor/record the DC power output of solar system and the AC power output of inverter (1 phase or balanced 3 phases); calculate the efficiency of DC to AC power conversion and the efficiency of the max. output power

Analyzer System, Level Gauges, Electrode Type Level Gaug

Analyzer System, Industrial Automation Product

Mediworks Anteriors System Analyzer, Rexxam ( SHIN NIPPON) Autorefractomete

Pacing System Analyzer, Passive Fixation Leads, Adapter

Refrigeration System Analyzer, Vibration Analyzers / Balance

Refrigeration System Analyzer, Refrigeration Oil, Refrigeration Ga

System Analyze, Remote Server Solutio

Solar System Analyze

Refrigeration System Analyzers, Exhaust Gas Analyze