Temperature Instrument Dealers

Smart Port is a Series of immersion type temperature measurement equipments designed for molten metals. It consist of a special electronic hardware and SMART LOGIC software which automatically corrects errors introduced due to de-rating/ageing effect of electronic components, in turn ensures long-term consistency in accuracy of measurement. Plateau Detection Technique is used for accurate molten metal temperature measurement. The microprocessor controlled electronics is housed in sturdy enclosure to suit foundry/steel plant conditions. Separate models are available for ferrous and Non-ferrous molten metal temperature measurement.   Plateau detection technique: In this technique transient response of sensor and system is ignored. Steady state response is monitored and confirmed by taking several samples. Once it fits in its detection criteria the temperature is displayed. The operator can remove the lance to prevent it from melting in the molten metal bath. This technique displays correct temperature and ignores incorrect readings by giving error messages. Thus there is no possibility of hot spot measurement in this technique. This operation is completed in 1-3 sec in case of single dip paper tube thermocouple tips and 3-8 sec in case of Multi dip thermocouple tips. It ensures life of receptacle (connector for tip and lance). This technique is world wide used in Induction furnaces

MODEL GRD - 1   The Grant temperature gradient plate is a highly efficient bi-directional temperature gradient system for investigating responses to temperature of seeds, small plants and animals, micro-organisms or any small component or material. The design is based on the fact that a temperature gradient results if one edge of a square aluminum plate is heated and the opposite edge is cooled.   The gradient runs in one direction for part of the 24 hour cycle and is then automatically switched to run at a right angle to its original direction for the remainder of the cycle, to provide all possible combinations of minimum and maximum temperature. Specialist lighthoods can also be supplied.   An integral Grant Squirrel data logger provides time/temperature data from five temperature sensors located under the plate.   The units have been supplied to Kew Gardens Millennium Seedbank, Germain's Seeds, British Antarctic Survey and Grassland Research.   Applications:   Seed testing Seed physiology Germplasm screening Plant physiology Entomology Biotechnology Electronic component testing Environmental microbiology     Features:   Robust, fully integrated system. Fitted with castors to assist with locating the unit. A 24-hour adjustable timer controls the length of the two phases within the 24 hour cycle, and the switching of the gradient direction. A removable Perspex grid effectively divides the working area into 196 miniature incubators, each with a different temperature regime - allows many samples to be tested without the need for separate controlled environment chambers. Over temperature protection is provided on each edge by fixed temperature cut-outs. Multi-channel Squirrel data logger for recording time and temperature from five probes positioned underneath the plate - one in each corner and one in the centre – for later analysis by PC.

We are reckoned as one of the stupendous Portable Temperature Measuring Instruments Exporters from India. Various national as well as international clients are placing bulk orders for the Temperature Measuring Instruments due to the unmatched quality and unsurpassable performance in respective applications. The Portable Temperature Measuring Instruments are designed using optimum quality that ensures notable features like high durability, accurate reading and low maintenance cost. The device is also designed to give accurate results even in harsh conditions. The instruments in the SITRANS T line are true professionals for temperature measurements, even under extreme conditions. Whether high or low temperatures or hazardous areas, the SITRANS T with communications capability can cope with all demands in many different sectors.

Coveting 100% customer satisfaction, we as a prominent Manufacturer put a great effort in delivering excellence. Temperature Measuring Instruments are available in a wide variety. These are manufactured under the strict guidance of skilled professionals to make sure there is no compromise with the quality. Their longer life and perfect design make them an attractive alternative. Get your hands on the impeccable quality for minimal rates.

IR Temperature Measuring Instruments FEATURES * 2 in 1, Infrared thermometer + Type K thermometer. * Infrared thermometer, non-contact temperature measurement, -20 to 400 ℃ ℉ ( -4 to 752 ). * Type K thermometer , range : -100.0 to 1300.0 -148.0 to 2372.0 . ℃ ℉ * 0.1 display resolution both for the ℃ measurement of IR thermometer and Type K thermometer. * Microcomputer circuit with high performance. * Auto power shut off saves battery life. * Wide temperature measuring range. * Build in & select button. ℃ ℉ * Data hold. * Memory function to record the maximum & minimum reading. * Build the REL button, useful for relative measurement. * Emissivity adjustment. * Red laser target light guide, < 1 mW. * Heavy duty & compact housing case.

All stainless steel bimetal thermometer, Model A Accuracy: Class 1 (EN-13190) Size: 100mm, 160mm Range: -50 to 500 °C, -80 to 1000°F Wetted Material: SS316L or SS316Ti

We offers universal temperature measuring instrument which have been designed to meet the industrial calibration requirements and temperature measurement needs at competitive cost. The instruments are hand held, compact, rugged and portable.

BrouchureDocuments Description DPM-6 Digital Indicator is especially applicable to some of the occasion only requiring display and transmission of measurement values. It can support various kinds of thermocouples, thermal resistance and linear signal input, with ultra measurement ranges, power disconnection, interrupted resistance and couple disconnection indication functions, with 4-20mA transmission PV (measurement value), SV (set value) function.

Measures relative humidity & temperature Calculates dew/frost point Power supply range: 5…16 VAC / 5…24 VDC Outputs: 0…1 V / 0…5 V / 0…10 V (standard probes)0…1 V / 0…5 V / 0…10 V / 0…20 mA / 4…20 mA (industrial probes) Voltage outputs configurable via software Highest precision and reproducibility Excellent long-term stability

From needle valves and thermometers to pressure gauzes.... and RTD to level gauzes we offer a comprehensive range pressure and temperature instruments for various laboratory and scientific applications. Superior in quality, durability and performance, our pressure and temperature instruments are available at most reasonable prices. Pressure Gauges Diaphragm Gauges Temperature Gauges Level Gauges Level Indicators Sight Flow Indicators Sight Glasses Thermometers Digital Temperature Indicators Digital Temperature Controllers Temperature Baths RTD Thermocouples Thermowells Syphons Needle Valves

Product Details RTD CALIBRATOR THERMCOCOUPLE CALIBRATOR MA /MV CALIBRATOR UNIVERSAL CALIBRATOR MULTI LOOP HART CALIBRATOR RESISTOR DECADE BOX

Temperature controller are highly used for industrial process systems, These temperature recording in a process is the most common and widely required application in any process. The commonly used temperature sensors are RTD Pt100 Pt1000 Cu53 Thermistors and different kinds of Thermocouple. In order to avoid electromagnetic interference, the temperature signal is converted to 4-20mA and is carried to the logger. Our range of Temperature Data Logger includes Temperature Humidity Logger, RTD Data Logger, Thermocouple Data Logger and Flameproof Data Loggers.

Temperature Bath MI - 30This equipment has been specifically desgined for primary and secondary laboratories and has been supplied world-wide to researchers working in many fields of thermometric investigations and calibration.

A K Engineers is one of the leading Suppliers of the Temperature Instruments. Various types of Temperature Instrument like Temperature Thermometer, Handheld Digital Thermometer, Non Contact Thermometer, Temperature Controller, Temperature Gauges, Temperature Transmitters, Thermocouples, RTDs, thermostats and Thermisters etc. are provided by us. We provide Temperature Instrument exactly suiting the requirements of the clients. The Temperature Instruments are procured from well-known companies in the industry with assurance of top-quality. Each accurately designed Temperature Instrument that we offer is well-tested to ensure this. Demanded By Process industryFood processing industrySugar industryHVAC industrySugar industrySteel industryFertilizer industryPower Plants

We are involved in offering a wide range of Measuring Instruments, which is developed in line with industry norms and guidelines. The raw inputs used in the production of these instruments are sourced from leading and certified vendors of the market after rigorously examinations of quality and flawlessness.

Temperature: 0 ... +200°C, Humidity: 0 ... 100% rH, pmax: 25 bar, tmax: +200°C Output: 2x 4 - 20 mA, Temperature: ±0,1°C Humidity: ±2 % rH.The range AFK-G humiditytemperature sensors are sensors for measuring relative humidity and temperature (optional) in air and other non-aggressive gases for an operating temperature to 200 °C. The high pressure variant can be used up to a pressure of 25 bar. The sensors are thus ideally suited for measuring humidity in industrial processes. The sensors are based on capacitive metrology which is reasonably-priced, maintenance-free and highly accurate. The change in capacitance is converted to an electrical output signal by electronics normally mounted on the humidity sensor element. Both parts form a capacitive humidity sensor that can be adjusted using humidity references. Accuracy is approximately ± 2% rH. The transmitters offer a 4 - 20 mA analogue output for relative humidity and a second 4 - 20 mA output for temperature when specified.

We bring in for our valuable patrons a wide range of Temperature Measuring Instruments which find their varied application in different industries. These instruments have been cultivated to the advanced point so that they can provide readings and information in minute detail. The offered range has its basic application in general nonlinear relationship of the the platinum.

We are one of the trusted exporters and suppliers offering a wide range of Temperature Measuring Instruments to the clients. The Temperature Measuring Instruments that we offer are highly used in cement, steel plant, pharmaceutical, automation and various other industries. We make sure that the products are bought from reliable manufacturers so that they offer flawless performance for longer time duration. We are known to place bulk orders within stipulated time-frame. We offer an exclusive range of Temperature Measuring Instruments which include Thermometers, Temperature Switches, Temperature Sensors, and Temperature Transmitters.

  Thermometer Baror   In this changing landscape of industries, we are firmly dedicated to meet the expected needs of our customers. We manufacture & export Thermometer Baror & committed to provide satisfactory service to their customers. Our product range includes: Dry & Wet Bulb Thermometer C&F Combined, Maximum & Minimum Thermometer, Aneroid Barometer, Wall Thermometer, and Aneroid Barometer.

Temperature Control Instruments, Ductable AC Units, Screw Chille

Temperature Instrument, Vacuum Gauge, Vacuum Pump, Pressure Instrumen