Titanium Dealers

The Ferro Alloys Division is fully equipped to manufacture 3600 MT of Ferro Titanium every year. The facility is spread over 3 acres with about 20,000 Square feet dedicated to manufacturing, sizing & packing ferro titanium.

We are offering ferro titanium. We are identified as one of reputed ferrotitanium manufacturers in the national and international markets. Our ferrotitanium is highly efficient and is used as a cleansing agent, deoxidizer, and for desulfurization.

Titanium Grades:-Manhar Metal Supply Corporation Supplies Titanium In Different Grades. We Have Titanium Grade 1, Grade 2, Grade 5, Grade 7, Grade 9, And Grade 12. Titanium And Its Alloys Have Proven To Be Technically Superior And Cost-Effective Materials Of Construction For A Wide Variety Of Aerospace, Industrial,Surgical Implants, Gold Refinery , Anodising Plants , Heater For Industrial Use , Marine And Commercial Applications. In North America,Approximately 70% Of The Titanium Consumed Is Utilized For Aerospace Applications.Due To The Expansion Of Existing Applications And The Development Of New Uses, The Greatest Growth Will Occur In The Industrial, Marine And Commercial Sectors Titanium is as strong as steel but much less density. It is therefore important as an alloying agent with many metals including aluminium, molybdenum and iron. These alloys are mainly used in aircraft, spacecraft and missiles because of their low density and ability to withstand extremes of temperature. They are also used in golf clubs, laptops, bicycles and crutches. Power plant condensers use titanium pipes because of their resistance to corrosion. Because titanium has excellent resistance to corrosion in seawater, it is used in desalination plants and to protect the hulls of ships, submarines and other structures exposed to seawater. Titanium metal connects well with bone, so it has found surgical applications such as in joint replacements (especially hip joints) and tooth implants. The largest use of titanium is in the form of titanium(IV) oxide. It is extensively used as a pigment in house paint, artists’ paint, plastics, enamels and paper. It is a bright white pigment with excellent covering power. It is also a good reflector of infrared radiation and so is used in solar observatories where heat causes poor visibility. Titanium (IV) oxide is used in sunscreens because it prevents UV light from reaching the skin. Nanoparticles of titanium (IV) oxide appear invisible when applied to the skin. The Properties And Characteristics Of Titanium Which Are Important To Design Engineers In A Broad Spectrum Of Industries Are: Excellent Corrosion Resistance: Titanium Is Immune To Corrosive Attack By Salt Water Or Marine Atmosphere. It Also Exhibits Exceptional Resistance To A Broad Range Of Acids , Alkalis, Natural Waters And Industrial Chemicals. Superior Erosion Resistance: Titanium Offers Superior Resistance To Corrosion, Cavitation Or Impingemnet Aatack. Titanium Is Atleast 20 Times More Erosion Resistance Than Copper Nickel Alloys High Heat Transfer Efficiency: Under”In Service” Conditions, The Heat Transfer Properties Of Titanium Approximate Those Of Admirately Brass And Copper Nickel.There Are Several Reasons For This: 1) Titanium’s Higher Strength Permits The Use For Thinner Walled Equipment. 2) There Appears To Be Unusual And Benefical Characteristics In Titanium’s Inherent Oxide Film. 3) The Relative Absence Of Corrosion In Media Where Titanium Is Generally Used Leaves The Surface Bright And Smooth For Improved Lamellar Flow. 4) Titanuim’s Excellent Erosion-Corrosion Resistance Permits Significantly Higher Operating Velocities. Superior Strength to weight Ratios The Densities Of Titanium-Based Alloys Range Between 160 Lb/In3(4.43gm/Cm3) And 175lb/In3(4.85 Gm/Cm3).Yield Strengths Range From 25,000 Psi(172 Mpa )Commercially Pure(Cp) Grade 1 To Above 200,000 Psi (1380 Mpa) For Heat Threated Beta Alloys.The Combination Of High Strength And Low Density Results In Exceptionally Favorable Strength-To-Weigth Ratios For Titanium Based Alloys.These Ratios For Titanium Based Alloys Are Superior To Almost All Other Metals And Become Important In Such Diverse Applications As Deepwell Tube Strings In The Petroleum Industry And Surgical Implants In The Medical Field. Special Information For Fraction of Titanium Keeps tools Sharp Titanium Has A Tendency To Gall, And Its Chips Can Weld To The Cutting Edged Of The Tool. This Is Particularly So Once Tool Wear Begins.Sharp Tools Should E Employed At All Times And Should Be Replaced Before They Dull. The Feed Should Not Be Stopped While The Tool And Work Piece Are In Moving Contact. Grinding Of Titanium In Grinding,The Difference Between Titanium And Other Metals Is The Activity Of Titanium At High Temperatures.At The Localized Points Of Wheel Contact Titanium Can React Chemically With The Wheel Material.The Most Important Facts To Consider In Order To Prevent This And Ensure Successful Grinding. Joining Of Titanium Titanium And Titanium Alloys Can Be Readily Joined By Normal Mechanical Fastener Techniques.With The Exception Of Brazing And Friction Welding,These Methods Are The Only Satisfactory Means Of Making Joints Between Two Nonweldable Titanium Alloys Or Between Titanium And Dissimilar Materials.   Hints For making Titanium Titanium Can Be Fabricated Using Techniques Which Are No More Difficult Than Those Used To Machine Type 316 Stainless Steel.Commercially Pure Grades Of Titanium With Tensile Strengths Of 35,000 To 80,000 Psi Machine Fabricate For Easier Than The Aircraft I.E. 6al-4v With Tensile Strenghts Up To 200,000 Psi. Welding Titanium In General,Welding Of Titanium And Its Alloys Can Be Readily Performed, But It Is Necessary To Exclusive Reactive Gases,Including Oxygen And Nitrogen From The Air,And To Maintain Cleanliness.Thus Weld Properties Are Heavily Influenced By Welding Procedured, Especially By The Adequacy Of Insert Gas Shielding. Fire Prevension Storage Of Coarse Titanium Turnings And Chips Is Relatively Safe. Storage Or Accumulation Of Titanium Fines Constitues A Fire Hazard.Clean Machines And Good Workshop Practice Are Usually Sufficient To Avoid Any Danger Of Fire When Machining Titanium. Application Titanium Is Used In Steel As An Alloying Element (Ferro) To Reduce Grain Size And As A Deoxidizer, And In Stainless Steel To Reduce Carbon Content. Titanium Is Often Alloyed With Aluminium (To Refine Grain Size), Vanadium, Copper (To Harden), Iron, Manganese, Molybdenum, And With Other Metals. Applications For Titanium Mill Products (Sheet, Plate, Bar, Wire, Forgings, Castings) Can Be Found In Industrial, Aerospace, Recreational, And Emerging Markets. Powdered Titanium Is Used In Pyrotechnics As A Source Of Bright-Burning Particles. Industrial Welded Titanium Pipe And Process Equipment (Heat Exchangers, Tanks, Process Vessels, Valves) Are Used In The Chemical And Petrochemical Industries Primarily For Corrosion Resistance. Specific Alloys Are Used In Down Hole And Nickel Hydrometallurgy Applications Due To Their High Strength (E. G.: Titanium Beta C Alloy), Corrosion Resistance, Or Combination Of Both. The Pulp And Paper Industry Uses Titanium In Process Equipment Exposed To Corrosive Media Such As Sodium Hypochlorite Or Wet Chlorine Gas .Other Applications Include: Ultrasonic Welding Wave , Wave Soldering, And Sputtering Targets. Titanium tetrachloride a colorless liquid, is important as an intermediate in the process of making and is also used to produce the Ziegler-Natta catalyst.

Applications:-   Titanium is used in gray iron. A small percentage promotes Graphitization. It is highly reactive in steel making and combines readily, and forms stable compounds with carbon, oxygen, nitrogen & sulphur. Because of its reactivity, it may be used to fix these elements, reducing eliminating their sometimes harmful effects. Specifications Ti 30-35% C 0.10% max Si 2.0% max Al 10% max

Ferro Titanium is used by stainless steel makers as a stabilizer to prevent chromium carbide forming at grain boundaries and in the production of low carbon steels for sheet production. Ferro Titanium is also used in foundries for addition of titanium to the molten metal imparting excellent strength to it without altering other ratios.Various titanium bearing materials are employed in making Ferro Titanium. Major sources include titanium scrap, titanium sponge, ilmenite, leucoxene, rutile. These materials are either reduced by aluminothermic means or melted in induction furnace with iron to produce ferro titanium of various grades and specifications. Various grades are manufactured, the most common being 20-25% Ti for foundries, 35-40% Ti for welding, 70% Ti for stainless steel production.

We are offering titanium & alloys: grade 1, gr. 2, gr. 3, gr. 4, gr. 5, gr. 7, gr. 8, gr. 9, gr. 10, gr. 11, gr. 12 & gr. 22 specifications as per astm b265 , astm b337, astm b348, astm b381 and also as per international standards including mil-t-9046j, 9047g, ams 4911, ams 4928, ams 4965, ams 4901, ams 4921, ams 4900 etc,. Forms & shapes: wire, sheet, plate, strip, round bars, hexagonal, flats, square, angle, channel, blanks, tubes, billets, pipes, pipe fittings, forging rings, special shape forgings, fastners etc. we assure you that we will supply genuine prime quality materials with test certificates against your orders. we would like to receive your valuable requirements. works :- andaman & nicobar islands | andhra pradesh | arunachal pradesh | assam | bihar | chandigarh | chhattisgarh | dadra & nagar haveli | daman & diu | delhi | goa | gujarat | haryana | himachal pradesh | jammu & kashmir | jharkhand | karnataka | kerala | lakshadweep | madhya pradesh | maharashtra | manipur | meghalaya | mizoram | nagaland | orissa | pondicherry | punjab | rajasthan | sikkim | tamil nadu | telangana | tripura | uttaranchal | uttar pradesh | west bengal

Apple Steels, a settled association occupied with exchanging of top notch managed by a technocrat business person. Titanium alloy scrap (Ti Alloy Scrap) have various properties when is comes to helpful characteristics. With the expansive measure of titanium utilized, there is additionally a lot of titanium scrap and titanium compound scrap to reuse from these different types of its property utilize. Titanium combination scrap is helpful with its properties of corrosion resistance (saltwater propeller shafts), high softening temperature and hard yet lightweight cosmetics.   PECIFICATIONS  Material : Titanium  Grades : Grade 1,2,3,4,5   FEATURES  Excellent quality  Corrosion resistant  Free from impurities

Titanium is one of the toughest metals and exists in abundant quantity on the earth surface. We offer superlative quality Titanium that is processed in well-reckoned international firms. It is duly checked at our end and is assured to be free from all kinds of impurities. We are recognized as one of the prime Suppliers of Titanium in India. Features : Does not corrodeHas high strengthLight in weightCan easily be fabricatedAvailable in different specifications Uses : Used for desalination of the waterFor aircraftsTo iridize the glass, etc.

Ferro Titanium we offer has outstanding strength-to-weight ratio makes the alloy perfectly suitable for applications in the aerospace & automobile industry. We are one of the trusted names among the reputed, Ferro Titanium Manufacturers., Exporters and Suppliers based in India. Keeping the market standards in view reasonable price has been fixed for the Ferro Titanium. Features SafeCorrosion resistantAccurate compositionHigh gradeQuality packing Used As An additive in the production of Steel Supplied To Aerospace industryAutomobile industry

We offer a comprehensive range of Titanium Rod, Bars & Wires for our clients spread across the globe. Known for resistant to general corrosion, crevice corrosion, intergranular attack, pitting and stress corrosion cracking, our range of titanium round bars are widely used by our clients spread across the globe. Specifications :- Grades :  Grade 1, Grade 2, Grade 3, Grade 4, Grade 5, Grade 7, Grade 9, Grade 23

KMML has taken a big leap into aerospace industry and defence application with the commissioning of 500TPY Titanium Sponge Plant. The idea of setting up a Titanium Sponge Plant took shape in this context so that the country’s strategic programs in Defence and Aerospace are not affected for want of Titanium sponge. Former President of India His Excellency Dr.A.P.J.Abdul Kalam highlighted the importance of setting up of Titanium Sponge Plant at Chavara during his speech at Kerala Legislative Assembly. The Defence Metallurgical Research Laboratory (DMRL under DRDO) developed the process of sponge production after twenty years of continuous R&D and established an experimental facility at Hyderabad. By the Commissioning of KMML TSP India has become the seventh country in the world to have the technology to make Titanium Sponge. The project is fully funded by Vikram Sarabhai Space Centre (VSSC under ISRO) and the sponge produced will be used for their aerospace applications.

We are offering Ferro Titanium Ti – 30 – 35% Size : 15 – 70 MM (+- 10%) AL – 8% Max Si – 3% Max C – 0.05% Max S – 0.01% Max.

We offer ferro titanium. Bharat dyes agency (an iso 9001:2008 certified company), direct suppliers of various types of raw materials used in lost wax precision investment casting, sand casting, cast iron and s. G. Iron foundries including steel plants, textile & chemical industries across the nation.

1. Rejuvenates skin, promotes pores and skin elasticity, will increase skin thickness 2. All kinds of skin are suitable. 3. The effective are noticeable 4. Process will not be painful 5. Can be used by yourself anytime at your personal convenience 6. Size:0.2mm,0.25mm,0.3mm,0.5mm,0.75mm, 1.0mm,1.5mm,2.0mm,2.5mm,3.0mm

Titanium alloys are metals that contain a blend of Titanium and other synthetic components. Such compounds have high rigidity and sturdiness (even at amazing temperatures). They are light in weight, have unprecedented consumption resistance and the capacity to withstand great temperatures. Be that as it may, the high cost of both crude materials and handling limit their utilization to military applications, flying machine, rocket, therapeutic gadgets,

We are offering braclet titanium 3000 goss. made-up of 100% titanium metal , with 3 germanium far infra red metal conductor (negative ions)& 100% neodymium magnets (king of magnets) the magnets are made up of three metals: boron, ferrite and neodymium. neodymium is a rare earth metal and expensive too. Bio magnetic therapy bracelets with gauss power min. 3300 to 10,000 gauss power approx.

We are a quality conscious firm, thus never compromise on the quality of the offerings. In addition, we make use of quality tested raw material and modern work methods for manufacturing the same. Product packaging is done using industrial grade materials by us to ensure safe and undamaged delivery of consignments. Further, we provide tailored packaging solutions.

We offer our clients with a qualitative range of Ferro Titanium. These are ferro alloys consisting alloy of iron and titanium in the ratio of 10-20, wherein 45-75 % titanium and sometimes a small amount of carbon. It is used in steel making as a cleansing agent for iron and steel.