Total Organic Carbon Analyzer Dealers

The Series 6700 covers a complete range of Total Organic Carbon (TOC) Analyzers capable of addressing a variety of industrial applications for process and environmental compliance purposes. Depending on the application, TAI can recommend which technique is best suited to continuously detect TOC within your process.   Features Complies with EPA, ASTM, and other standard approved methods for continuous TOC analysis  NPOC (Non-purgeable organic carbon) analysis  TOC-True Analysis (including volatile organics)  Rapid response  Onboard Microsoft Windows CE computer plus paperless chart recorder OR Menu driven LCD display  Separate electronics and liquid compartments  Low maintenance and easy access for service

spectro::lyser™ UV-Vis monitors depending on the application an individual selection of TSS, turbidity, NO3-N, COD, BOD, TOC, TSS, color, O3, H2S, AOx. NOx fingerprints and spectral-alarms, temperature and pressure s::can plug & measure measuring principle: UV-Vis spectrometry over the total range (200-720 nm or 200-390 nm) multiparameter probe with adjustable open path length. ideal for surface water, ground water, drinking water and waste water. long term stable and maintenance free in operation. factory precalibrated, local multi-point calibration possible. automatic cleaning with compressed air. mounting and measurement directly in the media (InSitu) or in flow cell (monitoring station). operation via s::can terminals & s::can software. recomended by and complient with public authorities and international agencies such as Chinese EPA, US EPA and CPCB

Get more from your analysis with the Aurora 1030C TOC Analyzer, an instrument designed to process aqueous samples for the analysis of total organic carbon (TOC) using the high temperature combustion technique. Capable of processing up to 300 samples daily, the Aurora 1030C offers a broad sample scope of 100 ppb to 30,000 ppm. In its mission to process aqueous samples for the analysis of TOC, total inorganic carbon (TIC), and non-purgeable organic carbon (NPOC), the Aurora 1030C has been known to reduce maintenance costs. Built with a patented dual chamber combustion reactor for employing the high temperature combustion technique, the 1030C's first reactor chamber contains a bed of quartz to protect the platinum catalyst in the second chamber from deposition of noncombustible constituents, and ensures consistent oxidation conditions for stable blanks. As a result, this reactor design extends catalyst life and reduces instrument maintenance costs.

Dissolved carbon and nitrogen isotope analysis on the highest level Unique applications for IRMS analysis of TOC and TNb 100% C and N recovery independent from sample type and matrix From trace to high concentration, from fresh to briny samples Matrices ranging from dilute glacial meltwaters to aggressive soil extracts Superior ease of use through sophisticated self-diagnosis more

The Aurora 1030W TOC Analyzer processes aqueous samples for analysis of the total organic carbon (TOC), total inorganic carbon (TIC), and non-purgeable organic carbon (NPOC) content of the samples. Using heated persulfate oxidation technology, samples containing 2 ppb to 30,000 ppm of organic carbon can be analyzed. The Aurora 1030W supports USEPA-approved methods, Standard Methods, ASTM, DINISOCEN, USP, and EU Methods. Depending upon the protocol employed, up to 300 samples per 24-hour period can be analyzed, and in excess of 100,000 samples per year.

The TOC instrument uses the classical flow through concept for TOC online control. The efficient UV oxidation of organic compounds by "direct surface principle" in combination with conductivity detection guarantees the high precision of the measured values.The automized functions of qualification allow a high standard of safety and minimized operation costs in controlling pharmaceutical water.Operation control is achieved on the basis of windows XP embedded software.It is an eays to use system which brings quality control at an affordable level to your lab. The TOC is a valuable accessory for all EDI and ultra pure water systems.   Calibration Calibration can be done by the user himself. For calibration of the TOC instrument the online control mode has to be stopped and the calibration is performed.The operator has to connect the two intels with the calibration standard solution and diluting water sample. The programmable procedure of the calibration steps will be performed automatically.The statistical evaluation of the measurements and the corresponding calibration parameters will be shown on th escreen (plausibility test)

The Series 6700 covers a complete range of Total Organic Carbon (TOC) Analyzers capable of addressing a wide variety of industrial applications for process and environmental compliance purposes. Depending on the application, TAI can provide an recommendation as to which technique would be best suited to continuously detect TOC within your process. UV / Heated Persulfate Combustion Ozone Promoted Ultrapure Each configuration is available with an advanced Microsoft Windows-based computer with touch screen control. The robust and reliable Infrared CO2 analyzer is the heart of each design. It provides specific, interference-free CO2 detection, has no moving parts, and is extremely easy to access and service, as required. Depending on your specific needs, TAI is capable of providing a complete turn-key system solution suitable for use in hazardous, outdoor environments. Applications: Boiler feedwater; Cooling water; Wastewater; River water; Pharmaceuticals; Process control

membraPure is one of the top players in the core markets of TOC measurement, amino acid analysis and ion chromatography, offering an outstanding level of technology and quality such as post column derivatization with Ninhydrin and NDIR TOC detection. The systems enable TOC analysis of different water qualities – from ultrapure water in the pharmaceutical industry and in power plants up to waste water from the production sites – we provide the right instrument for the determination of your TOC.   Products   Amino Acid Analyser TOC Analyser

Applications •   Measurement of TOC in purified water as per USP/EP and water for injectibles as per USP/EP/IP/JP•   Water purification plant validation •   Validation of water distribution system•   Measurement of TOC in Raw water / Feed water Cleaning Validation    Description The TOC-L series of TOC analyzers adopts the 680°C combustion catalytic oxidation method, which was developed by Shimadzu and is now used worldwide. 　While providing an ultra wide range of 4 μg/L to 30,000 mg/L, these analyzers boast a detection limit of 4 μg/L through coordination with NDIR. This is the highest level of detection sensitivity available with the combustion catalytic oxidation method. 　In addition, the combustion catalytic oxidation method makes it possible to efficiently oxidize not only easily-decomposed, low-molecular-weight organic compounds, but also hard-to-decompose insoluble and macromolecular organic compounds.FeaturesExtremely wide measurement range from 4 μg/L to 30,000 mg/L, applicable to everything from ultrapure water to highly contaminated water （TOC-LCSH/CPH） Capable of TC, IC, TOC (= TC-IC), and NPOC measurement; options enable POC (volatile organic carbon), TOC via POC + NPOC, and even TN (total nitrogen) measurements The blank check function evaluates system blanks by measuring ultrapure water processed automatically within the instrument The automatic dilution function enables measurements up to 30,000 mg/L Reliable sample injection system Automatic sample acidification and sparging The automatic dilution function reduces sample salinity, acidity, and alkalinity, significantly extending the period of use of catalysts and combustion tubes (The period of use depends on the sample and measurement conditions.) Stat or priority samples can be added at anytime to the analysis schedule without interrupting operation even when an autosampler is used Select from 4 models to suit your application The TOC-L series consists of a high-sensitivity model with a detection limit of 4 μg/L, making it suitable for a variety of applications, including pure water measurements, and a standard model designed with cost performance in mind. Each analyzer is available as an LCD and keyboard-equipped standalone model, or as a PC-controlled model. In addition, the USB format has been adopted as the external interface, enhancing the equipment’s versatility. Even the standalone models are capable of output to a general-purpose PC printer or to a USB memory stick. Options to further enhance functionality With the TOC-L series, numerous options enable a variety of functional enhancements. These include simultaneous measurement of TOC and TN (total nitrogen) (when a TN unit is added), the use of compressor air (when a carrier gas purification kit is added), and the measurement of gas samples and solid samples (when a gas sample injection kit and solid sample combustion unit are added).　 Sea water sample measurement and small sample volume options have also been enhanced. Space-saving and energy-saving design The width of the instrument is 20 % less in comparison with conventional Shimadzu models. This enables more effective use of laboratory space. The instrument width is unchanged even when the TN unit is added. This product conforms with Shimadzu’s ECO labeled product. Energy Saving: Power consumption reduced by 36 % (100 V) and 43 % (200 V) as compared to a conventional Shimadzu product. (Assuming 8 hours operation/day × 5 days/week)

Now Measure 3 Streams of water Online with one single instrument. TOC Analysers are used in diverse fields, including the management of tap water, effluent, and ultra pure water, management of pharmaceutical water used in drug manufacturing processes, evaluation of cleaning efficiency (cleaning validation), and environmental investigations of river water and soils water

Measurement of total organic carbon in purified water/ water for injectable as per USP XXIII/XXIV and in water for injectable as per European Pharmacopeia/ IP Monitoring of purification plant by measurement of TOC at various stages of purification. Cleaning validation Operating software is 21CFR Part 11 compliance

The Sievers M9 Portable Total Organic Carbon (TOC) Analyzer is the most versatile of the M9 TOC Analyzer Series, offering maximum flexibility for how and where it is used. Weighing just 9.4 kg (20.8 lb), it’s lightweight, compact design makes it a powerful troubleshooting analysis tool that can be installed online for continuous measurement or carried to any location in the water system. The M9 Portable is engineered for ease of use and cost-effective operation, allowing it to be used for single grab samples, with an optional autosampler, or in a process stream for continuous on-line TOC measurement. An unequalled level of efficiency and flexibility Operating Range – 0.03 ppb to 50 ppm Patented Membrane Conductometric Detection technology Meets Pharmacopeia requirements of USP, EP, IP and JP Fast, Smart and Versatile to Optimize Sample Processing time Touch Screen interface simplifies operation and data review Measures discrete grab samples, automated analysis with Auto sampler or online Optional Turbo Mode enables 4 sec measurement Optional 1st Stage Conductivity as per USP and EP for grab or auto sampler mode Designed for on-line cleaning validation applications Full compliance support for 21 CFR Part 11

Total Organic Carbon Analyser, Karl Fischer Titrator, Refractomete

Toc Analyzers, Ahuja Microphone, Weighing Balances, Weighbridge

Toc Analyzer, TURBIDITY METER, Portable Water Analysis Laborator

To measure Total organic Carbon (TOC),COD,BOD in Effluent treatment plants,Sewage treatment plants, Condensate return applications.

Toc Analyser, Dry Bath, Waste Collection Bags, Blood Bank Scale, Autoclav

Laboratory TOC Analyzer, Dew Point Meter, Hydrogen Gas Analyzer

Total Organic Carbon Analyzer, PHASE MONITO