Tuning Forks Dealers

We offer Adjustable Tuning Fork. ADJUSTABLE TUNING FORK (1421) Precision-grade aluminium alloy tuning fork with sliding weights on each tine. Weights adjust to deliver tones in C-128, D-144, E-160, F-170.7, G-192, A-213.3, and B-240 frequencies. Overall length, 8”.

Details : The 03-zone fork runs a little over 78 Hz, which is a frequency well above the range to produce ozone in the body. This will enhance the production of ozone in the body at a local area. The 03-zone fork can be used to wash over an area by pointing the prongs at it, or the stem can be placed on a particular spot.

On sturdy streamlined base with provision for horizontal or vertical use. Forks is manufactured from selected steel. Prong is 10x25x300 mm. Accurate frequency adjustment chrome plated, vibrations rate 60 per seconds. Electromagnet can work on 6 volts. The amplitude of vibration can vary by sliding the electromagnet inside prongs. Complete with stylet, mirror and counterpoise.

Description :-A pair of tuning forks mounted on individual resonance boxes, with one fork fitted with sliding mass to demonstrate beats. Changing the position of the boxes and the slider mass allow different frequencies and beats to be heard. Complete with hammer.

We Offer Tuning Fork 02. A small two-pronged metal device that when struck produces a sound of fixed pitch that is used as a reference, as in tuning musical instruments.

We offer brain tuner tuning fork. The brain tuners are a set of five tuning forks that can be used to change your states of consciousness. Each of the tuning forks is set to one of the following states of consciousness: beta for peak concentration and cognition alpha for deep relaxation and creativity theta for meditation and intuition delta for healing and deep sleep fifth fork-fundamental tuning fork

A heavy steel fork of about 60 vibrations per second is mounted on a heavy cast iron base. The electromagnet is adjustable so that the amplitude of vibration may be varied between wide limits. Complete with mirror for Lissajou’s figures experiments.

Product Description Tuning Forks, Set of 8 Steel tuning forks, nickel plated, each of different frequency marked on them. Frequencies are C1 – 256Hz, D – 288Hz, E – 320Hz, F – 341Hz, G – 384Hz, A – 426Hz, B – 480Hz and C2 – 512Hz.

On sturdy streamlined base with provision for vertical or horizontal use. Fork is manufactured from selected steel. Prong is 10x25x300mm. Accurate frequency adjustment; chrome plated, vibration rate 60 per second. Electromagnet can work on 6 Volts. The amplitude of vibration can be varied by sliding the electromagnet inside the prongs. Complete with stylet, mirror & counterpoise

available in different categories, biosonic tuning forks of our company are widely demanded amidst the clients. these biosonic tuning forks that we manufacture and supply are offered at affordable prices. the biosonic tuning forks have no other alternative available in the market when it comes to superior quality. attributes type- aluminum heavy welchalloy aluminum with heavy duty tone usedaccurately calibratedhighly reliable packaging material pouchvelvet box

Our products are packed under controlled conditions to ensure their quality is not compromised and buyers are presented with brand new products. We have an ultramodern facility to pack our products. For us making delivery of consignments is easy, as we have a productive logistic network that enables to reach buyers within the promised time.   Tuning Fork Activator : Used as a tuning fork activator. Available in Pack of 10.

999Hz Energy Tuning Fork Find increased energy level Longevity to energy level Increased relaxation As we all know Nitrous Oxide is a gas used to sedate people before and during surgery. What most people don't know is that we carry this same gas in our bodies. The nitrous oxide in our bodies isn't as concentrated as what is used in the medical field but it is still there. By using the Energy fork we release small amounts of nitrous oxide into our blood stream, which in turn relaxes us. As the nitrogen breaks down the oxygen fills the tissue giving us extra energy when we need it.  Using the Energy fork just before bedtime helps to relax you so you can sleep more soundly and get the rest you need.For sleep - tap the two weighted ends of the fork on the heel of your hand to start it vibrating. Next hold the tuning fork by the stem/handle and place the tip of the handle on your tailbone. Lastly, place the stem of the fork on the base of the skull. Sweet Dreams.The Energy fork is a wonderful tool for massage therapists in relaxing their clients during the massage and then giving the client a boost of extra energy in about 20 minutes after the massage. To do this process you will need to work the vibration up the spine. Start off by vibrating the tuning fork and place it on Sacral 2 (or tailbone) until it stops vibrating. Next repeat the process, moving up to Lumbar 2 (middle of the lower back) until the fork stops vibrating again. Now start the forking vibrating again and move up to Thoracic 10 (middle of the back) until it stops vibrating and repeat on Thoracic 4 (middle of the back at shoulder blades) until the fork stops vibrating. Start the fork vibrating again and place it on Cervical 5 (middle of the neck). Lastly start the fork vibrating one more time and place it on the back of the skull just above the spine. When you have finished the tuning for energy go on with the massage. About 20 minutes after the massage the client will be filled with energy. For just a boost of energy during the day start the tuning fork vibrating and place it on the base of the skull until it stops. Repeat this process 3 times and again in 20 minutes; you will have excess energy to spare.

Tuning Forks P-7220 Made of nickel plated steel with plain shank. (C1 256) to (C2 512) Tuning Fork Set P-7225 Set of 8 tuning fork of nickel plated steel with plain or screwed shank in case, frequencies marked from (C1 256) to (C2 512) as above. Pair of Tuning Forks on Resonance Boxes P-7240 Two Tuning forks are mounted on two wooden resonance boxes dimensions of which are compatible with frequency of the forks to produce a strong sustained tone. Forks are nickel plated with shanks to screw in the bushes on the top of the boxes. Each set supplied with rubber headed hammer. Two Tuning Forks on Resonance Box P-7245 Two tuning are mounted on a resonance box with one hammer. Four Tuning Forks On Resonance Box P-7250 Four tuning forks are mounted on a single proper sized resonance box to produce a major chord. Forks have frequencies of C1 256, E 320 Hz, G 384 Hz and C2 512 Hz. When struck together with hammer, the forks will produce the chord of C major. Supplied complete with one hammer. Beats Apparatus P-7255 It comprises two tuning forks each of frequency 426 Hz on two separate resonance boxes. One fork is fitted with adjustable loading mass. When both forks are sounded together, a clearly audible beat is produced. Rate of beats depends on difference in frequencies. This difference can be increased by changing the loading mass.

A tuning fork is a metal instrument with a handle and two prongs or tines. Tuning forks, will vibrate at a set frequency to produce a musical tone when struck. The vibrations produced can be used to assess a person's ability to hear various sound frequencies. A vibrating tuning fork held next to the ear or placed against the skull will stimulate the inner ear to vibrate, and can help determine if there is hearing loss.