Turrets Dealers

Turrets with two motors. one for indexing and servo motor for tool drive. Only tool in working position gets drive. Suitable for Axial Tool mounting.

Taking trials with different combinations of sample tooling on a single machine is a tough task for the R&D departments of pharmaceutical companies. To overcome this, we have developed a unique R&D turret. This turret consists of four stations of D-D, four stations of D-B, four stations of B-B and four stations of B-BB tooling.

  Model HAK31 series horizontal NC turret adopts the working principle of worm for driving, 3 face gear coupling as fine indexing mechanism, big screw for clamping, sending signal with hall unit. It features indexing without tool-holder disk lifting, steady rotating, low noise, high stiffness, multi stations, build-in cooling. It is the ideal Choice for processing complex parts.

ISSAC Ci 10008 is a part of the new Chamunda Intelligent Series Machines. It is a High Speed Single Rotary Tableting Machine with interchangeable Turret. This highly sophisticated and intelligent machine is fully automated and is provided with Supervisory Control and Data Acquisition System (SCADA). The machine is equipped with advance features required for the purpose of high quality pharmaceutical production. Built on the principle of latest tablet technology, Isaac Ci 10008 is a highly versatile and ideally suitable for medium to large batch size productions. Virtually a tool less design ensures rapid removal and immediate access to the various components in the Tablet Zone. Feeding system, Hooper, Discharge Chutes can be removed in no time for cleaning. This results in achieving optimum change over time. The advance feature of interchangeable turret enables it to incorporate all three type of turrets on a single machine. Swing type pre and main compression rolls, equal main and pre-compression forces and all the tablet parameters can be controlled through a touch screen as the machine is provided with Servo Drives for all the tablet controls. This is available with choice of turret having 37, 45 and 61 stations, corresponding to the various tooling requirements. Features Single rotary high speed tableting machine Output up to 366,000 Tablets / hour* Interchangeable Turret with change over time under 60 Minutes. Swing type equal sized pressure rolls with equal Pre and Main Compression Force up to 10 tons Fully Automatic Controls – Supervisory Control & Data Acquisition System (SCADA) Main motor and Force Feeder motor driven through ACVFD. Dial-less machine provided with drive motors for tablet parameter setting. Audit trails and summary reports. Batch data reporting and printing. Adjustable Upper Punch penetration through drive motor. Safety Interlocking for Upper and Lower Guards.

Used for movement of molten metal filled ladle from furnace to "Continuous Casting Machine" for higher output Material: carbon steel plates max thickness 130 mm and pipes Precision fabricated and machined material handling equipment Manufactured Turrets of both types – "with Lower & Lift", "without Lower & Lift", weighing from 15 tons to 75 tons Delivered more than 20 nos. to Concast India Ltd.

The bottle is then transferred to the pick and place type screw capper. Here the cap is picked up by the adjustable torque chuck and firmly tightened onto the bottle mouth. The capping chucks are finest quality precision component fitted with magnetic torque controlling coupling. This eliminates heat generation which normally occurs in friction type coupling in the chucks Flexible segmented cap holder picks up the caps. This compensates minor variation in cap diameter occurring due to long storage of caps in boxes. The capping torque can be set between 8 to 16 inch pound with minimum of time and set torque is maintained consistently. The cap delivery chute has a built-in cap washing system. The cap will not be picked up if there is no bottle hence there will be no wastage of caps. The cap delivery is from a hopper based on the ground level making loading of caps easier and also ensures the cap is delivered the right side up to the cap rinsing system. The capping turret is of a pick and place type which delivers the cap to the holder, this leads to improved cap tightening at high speeds. There is a cap rinser in the delivery chute from the hopper to the capping star wheel that insures any contaminants during storage of the cap are removed. The elevator cap hopper is placed on the floor level and so makes material handling and cap loading easier. The chute from hopper to capper has sensors in place to ensure that when the chute is full elevator motor stops. If the caps are not delivered till low level of chute- the machine will stop   and show alarm signal on panel. There is a no bottle- no cap system in place to prevent wastage of caps. There is an ejector mechanism in each capping chuck in case the cap is picked up when there is no bottle.

4 / 8 Position Tool Turrets | Rotary Indexing & Location using Hirth Couplings | Live Spindles Thru Single Power Drive | Multispindle 2 or 3 Tool Attachments at each position | Rigid Casting Stress Relieved structure | Simple Construction & Easy Maintenance | Suitable for SPM’s & Horizontal or Vertical Drill Tap Centers    

Chuck 1200mm Swing 1400mm Ht 630mm fix   Webster Bennett vertical Turret lathe hydraulic, hydraulic Webster Bennett 72″ VTL Vertical Turning Boring Machine, VTL VERTICAL TURNING Webster Bennett  hydraulic Webster Bennett 72" VTL Vertical Turning Boring Machine,VTL VERTICAL TURNING Webster Bennett,Webster Bennett vertical Turret lathe hydraulic  

We offer Turrets for all Indian make Tablet Compression Machines of Standard Specifications. For Other make Machines, Turrets may be offered on providing Machine Details & detailed Drawings.

Features a stainless steel forming post with gradient slots to accept .016, .017, .018, .020, and .022round and rectangular wires. The Economy version has plastic grip handles, While the Pro style is manufactured of all stainless steel parts.

We manufacture Rotary Tablet Press Turret for all types of Rotary Machines of Cadmach, Chamunda, Karnavati and other Manufacturers.   Please advise us on the following while sending the enquiry 1. Model of the Machine 2. Make of the machine 3. how many station 4. what is the tooling 5. Standard or GMP Model  

Hydraulic Turret, Hydraulic Self Centering Steady Rest, Machine Too

Tool Turrets, Automatic Tool Changer, CNC Chucker Lath

Turret, Pharmaceutical Machinery, Machine Tools, Wrapping Machine

Turret, Worm Gears, Stainless Steel Coating Pan, Single Rotary Tablet Pres

Turret, Gunning Machine, Tundish and Tundish Car, Caster Mould Jacke

CNC Vertical Turret RAM Type, Hydraulic Drilling Machin

CNC Turre

Auto Turret, Sheet Metal Machine, Hydraulic Press Brakes, Shear

Turret, Cement, Aggregate Concrete, Compound Wal

t is used for preparing arch wires with or without torque adjustments. It is a wire slotted body made of stainless steel.