UV Detector Dealers

This test unit has been designed to generate a wide range of optical output signals. Flame sensors for fire detection and flame monitoring applications can be activated and tested. Most optical flame sensors respond to Ultra Violet (UV) and or InfraRed (IR) radiation emitted from flames during combustion. Many sensors also use flame flicker techniques to distinguish between flames and other optical false sources. The test unit simulates the flickering flame signal by modulating the output of a filament lamp. The thermal time constant of a filament lamp prevents the generation of a perfect flame flicker signal. The slow response of the filament lamp will mean that some flame sensors many require more time to activate under test than they would with a real flame. Ideal for testing flame detectors Wide Spectral Output - UV, Visible, Near IR, Mid-IR Tests many Flame Sensors Types UV, UVIR, UVIR², IR³, IR², IR Conforms to NFPA 72 Chapter 14 (14.4.3) Portable with Rechargeable NiCd Battery Pack and Charger 12V 7 Ah maintenance free leak proof sealed battery Selectable Optical Output Type Constant Illumination Regular Flashing Sources (Range of Frequencies)

A highly sensitive instrument to detect flames electric spark, tire in environments where catastrophic consequences could result from unwanted fire. It is particularly suitable for use in outdoor applications because it is not affected by wind or rain and is insensitive to solar radiation. Various models to detect

U.V. Currency Detector is a boon for businessman, Bankers, Traders, Travel Agents, Post Offices, Railway and all other Institutions where a log of currency transactions take place. This units has one U.V. tube which helps in detecting all colour & chemical faults in counterfeit currency, cheques demand drafts visas, Passports, I.D. Cards, Credit Cards, Traveller's Cheques etc. in an efficient and effective way. It also consists of one white tube giving day light effect in which all water marks and other discrepancies in the currency cheque drafts are easily detected. A magnified glass is provided for extra clearity enabling us to see all the defects clearly in the currencychequesdrat. These defects are not visible to the naked eye. U.V. Currency detector is an ultimate device in checking counterfeit currency, duplicate cheques and fake drafts. It is a compact well designed appliance which can easily be accommodated on an office table or can be kept hidden inside a bank counter. This instruments has a magnifying glass for proper magnification.

* Sensitive Ultraviolet Sensor that detects the UV rays Produced by a flame* Aesthetically pleasing low profile design* Dust / Corrosion / Humidity Resistant* Standard Calibration Set to detect a 3 cm flame at 6 meters* Effective range up to 12 meters Technical Specifications * Operating voltage : 24 V Loop* Operating current :                  -  Standby current: 1.2 mA                  - Alarm current: 30 mA* Operating environment :                  - Temperature:- 10 ~ + 50O C                  -  Relative humidity: 95%* Detection Angle : 80 Degree* Dimensions : Diameter : 100 mm; Height : 50 mm  

Wide operating temperature range permits operation at higher ambient temperature 4-20 mA stepped output is the industry standard for remote alarm and fault indication Modbus and HART user interface provides complete status and control capability in the control room Three SPDT high-current programmable relay outputs provide both immediate and time-delayed relay outputs for alarm, warning and fault conditions Event logging stores fault and alarm history

These flame detectors give the highest immunity to false flame sources both indoors or out. They have internal self-test sources that check the detector’s operation when remotely instructed. The maximum ambient temperature is normally 55°C or 85°C for the higher temperature specification detectors.Detects invisible flames from fuels such as Hydrogen and other inorganic fuels.

With the simultaneous monitoring at four different wavelengths over the whole UV and visible range, the C-640 Detector allows you to detect and isolate your compounds using the Sepacore® Flash Chromatography systems. Detects most compounds in a broad wavelength range at 200 – 840 nm Saves time by simultaneously monitoring four wavelengths

Honeywell UV Detector with 6' cable , Mounting 1"-11-1/2 NPSM Internal Threads, Amb. Temp. -18 to 121 C, Pressure Max. 5 PSI.  

Siemens Landis manufacturer and supplier QRA series Photocell flame detector. These flame detectors have low sensitivity and are used for the supervision of gas or oil flames, yellow or blue burning oil flames and for ignition spark proving. The UV flame detectors are designed for use with Siemens burner controls. Known as UV Cell, Photocell and also called UV Cell Flame Detector.