Voltage Controllers Dealers

This product is designed with innovative software algorithms residing on latest technology PIC microcontroller chips. The design is conceived so as to reduce production overheads like wiring and testing when it is put on the servo voltage stabilizer. Integrated voltage stabilizer controller greatly reduces labour costs and increases production rate of the voltage stabilizers.

With the help of our efficient professionals, we are able to offer Voltage Controller to our clients. These are designed for electro magnetic driven vibratory bowl / linear feeder. Our Voltage Controller are available with various features as per the requirements of the clients. Further, they are provided with increase o/p voltage ranging from 0% to 100% of supply voltage. These are appreciated as they do not cause any jerk and mechanical damages to the feeder. Variable Voltage Digital controler for vibratory Feeder LED Digital Display Soft Startup ON/OFF Control ON/OFF Delay

With the help of our efficient professionals, we are able to offer Voltage Controller to our clients. These are designed for electro magnetic driven vibratory bowl linear feeder. Our Voltage Controller are available with various features as per the requirements of the clients. Further, they are provided with increase op voltage ranging from 0% to 100% of supply voltage. These are appreciated as they do not cause any jerk and mechanical damages to the feeder.

The company is counted amongst the trusted Manufacturers and Suppliers of Automatic Voltage Controller. Automatic Voltage Controller is considered as an industrial robot which continuously monitors the voltage variation all-round the clock. Moreover, whenever there is any voltage fluctuation, Automatic Voltage Controller rectifies it to the desired level. Automatic Voltage Controller is basically used to maintain the voltage and to reduce the breakdown of electrical equipment due to high or low voltage. Automatic Voltage Controller also carries additional advantages such as reduction in MDI, improvement of P.F and saving of power, etc. Note : It is suggested to install AVC with 400 Volt +15% or 400 Volts +20% input voltage variation range i.e. 340-460 Volts or 320-480 Volts models. SpecificationsInput VoltageApprox. Reduction in Break down Electrical EquipmentsApprox Power SavingVoltage variation BandsMotor Load below 10 hpLighiting LoadMotor Load below 10 hpLighiting Load380-400 VoltsNillNillNillNill & no servo stabilizer required400-420 Volts5%10%3%5%420-440 Volts10%20%6%10%440-460 Volts40%40%7%20%460-480 Volts80%60%10%30%

• We have designed and manufactured an electromagnetic voltage controller that focuses on solving the power quality problems related to short and long timevoltage variation.• This is a special equipment that supplies acceptable voltage at the point of common coupling in accordance with the electrical energy consumption regulations.• For further details and product demo, reach us via phone, email or the below inquiry form.

We are engaged in offering a proven range of automatic voltage controller that is used for maintaining the desired voltage and to reduce the breakdown of electrical equipments due to low or high voltage. These automatic voltage controllers are suitable for all electrical equipment and are available in the range of 30 kva to 3500 kva. features of our automatic voltage controller given below are a few of the superior features of our servo voltage stabilizer as compared to the conventional ones : we are using square copper section to facilitate more current carrying capacity.we insist on the use of chain drive allowing the regulating transformer to be driven at relatively higher speeds yielding smooth commutation avoiding potential jamming.we use carbon roller assembly instead of ordinary brushes. The torroidal type dimmer has to be cleaned very often because the brushes wear deposit and carbon on the track. The roller assembly used by us yields very low wear with the contact life expectancy exceeding 1, 00,000 meters of track level.in case of jerking loads the normal carbon brush tends to wear off because of its size limitation which would ultimately affect the efficiency of the system, whereas our roller assembly with stands jerks very effectively without hampering the working.the core is built from grain oriented silicon steel laminations which keeps iron loses to minimum values. The flux density is not allowed to rise to the saturation points thus reducing output waveform distortion.our systems are built to withstand an overload of 20 times than normal current for a small period, which is a unique feature in itself. The conventional ones will immediately burn in case of any overloading.the efficiency of our stabilizer at 75% load is more than 99%. advantages of our automatic voltage controller : in case, you find that your input voltage is higher even for few hours a day – then you can reduce failure rate of electrical equipment by installing saraswati’s avc & will have following advantages: reduction in breakdown of electrical equipment : 60 – 80% reduction in breakdown of motors, contactor coils, bulbs, tubes etc. Depending upon the input voltage variation and working hours of the plant. energy saving : with the installation of avc, 5-10% power saving is certainly possible. Power losses of any electrical equipment increase at low or high voltage. With the stabilized voltage at 390-400 volts, the extra losses generated due to low high voltage can be considerably reduced that will automatically result in energy saving. reduction in mdi (max demand indicator) : there will be definite reduction in mdi by 10 – 15% after the installation of an avc. Mdi is a multiplication of voltage & current and is half an hour reading. At higher input voltage, the current of electric motors also increases. So, the mdi also increases. for example : consider a 10h.p.motorsuppose, current at 400 volts = 12 ampscurrent at 450 volts = 14 ampsmdi at 400 volts = (400 x 12 ) 1000 = 4.8 kvamdi at 450 volts = (450 x 14 ) 1000 = 6.3 kva% increase in mdi at 450 volts as compared to 400 volts = ((6.3 – 4.8) 4.8) x 100% = 31.25% even if the high voltage occurs for half an hour in a month, the mdi increases. With the installation of the avc, the voltage will be controlled and mdi will also be controlled. improvement in power factor : whenever the voltage increases above 440 volts, there is a sharp reduction in power factor at least by square function of voltage. At higher input voltage (i.e. >400 volts), excitation current (no load current) of the industrial motors increases. The power factor of no load current is normally (0.2). So as the voltage increases, the excitation current also increases which further lowers the power factor. By maintaining constant voltage at 390400 volts with help of avc, there will be definite improvement in power factor by 10-15%. uniform quality of end product & increase in throughput : with stabilized input voltage to your sensitive production equipments, you can ensure that your production processes run consistently & continuously, without any interruption aberration, thus ensuring uniform quality of end product as well as increase in output. depreciation allowance @ 80% as per income tax act. Pay-back period: owing to the high efficiency of our avc (> 99% in avg. Running conditions) and its associated benefits, the payback period of our avc is normally within 6-12 months, depending upon the input variation and the number of working hours. specifications high voltage% reduction possible in breakdown of electrical equipments with avc% power saving possible with avcmotor below 10 hplighting loadmotor below 10 hplighting load380-400 vno reduction and no avc requiredno power saving and no avc required400-420 v5%10%3%5%420-440 v10%20%5%10%440-460 v20%40%7%20%460-480 v40%80%10%30%

The Arc Voltage Control maintains precise arc length by controlling arc voltage thus assuring high quality welds time after time on AC or DC applications. The control measures arc voltage and compares the measurements to the operator setting. It maintains the set arc length by moving the torch up or down as required via a motorized slide.

Automatic Voltage Regulator is the equipment meant for obtaining constant voltage from fluctuating mains input supply (9-12 Kv). It protects your valued equipment from over and under voltages, resulting in the improvement of efficiency, performance and safety of the equipment. Sushil Electricals covers a wide range of H.T automatic voltage regulator of capacity up to 5000 kva for different input 3-phase voltage i.e 11/22/33 kv and different required output voltage 415/433 volts with or without neutral.

We Manufacture Automatic Voltage Controller that is used for managing irregular load pattern on distribution transformers and long and inadequate distribution lines. Its optimum utilization is on rainy days and in peak hours. Salient Features Rugged constructionMinimize higher lossesReduces the losses of switches, cables, transformersSmooth continuous operation of motors Specifications Volts required : 390/400Consumption 15 - 20% lesser current The table below compares the behavior of 5 H.P. motor at different voltage:Input VoltageCurrentKVAPF4007.5 A5.20.842511% More18% More0.743519% More28% More0.6144526% More38% More0.57 Loss Comparison of Muskaan Make Regulator & Conventional make RegulatorCapacityMuskaan make Roller type regulator lossesConventional make Carbon brush type Dimmerstat losses60 A575 W1050 W75 A730 W2055 W100 A900 W3105 W

We are a renowned Manufacturer, Exporter & Supplier of Automatic Voltage Controller. The Automatic Voltage Controller monitors and controls the voltage fluctuation. The Automatic Voltage Controller works continuously to maintain the desired voltage level and protects the electrical equipment from breaking down due to varied voltage supply. Highlights Power savingReduction in MDIImprovement of P.Flong working life Benefits Of Installing Automatic Voltage Controller On Lighting Load By maintaining 380/210 volts-three / single phase output through Automatic Voltage Controller for Lighting Load, there will be definite saving in power bill & reduction in failure rate of lighting equipments, Higher the input voltage- more will be the saving The overall effect on the brightness of the lamp at 210 volts will be negligible. Advantages Reduction in Breakdown of Electrical Equipments Reduction in MDI Energy Saving Improvement in Power Factor Uniform Quality of End Product 80% Depreciation as per Income Tax Act Applications Cement PlantsFlour MillsEngineering UnitsPharmaceutical UnitsPaper MillsTube MillsHotelsHigh Rise BuildingsNursing HomeHospitalCold StoragesRolling MillsTextile MillsClubsRubber IndustriesFootwear and Leather UnitsRice ShellersDistilleries & beveragesTea EstatesOil and Vanaspati PlantsFood Processing Units

We are offering automatic voltage controllers. Power engineers is known for reliability and continuous improvement in the field of rolling contact type automatic voltage controller, servo voltage controller, automatic voltage stabilizer, chemical process rectifiers, electroplating power rectifiers and special purpose transformers. The systems are designed and supervised by a team of qualified engineers having more than 35 years of experience to achieve best possible quality and total customer's satisfaction.

power electrical & controls (pec) is known for reliability and continuous improvement in the field of rolling contact type automatic voltage controller, servo voltage stabilizers. Indian power servo voltage stabilizer primarily consists of the following  linear, vertical rolling contact voltage regulator, double wound buck / boost type series transformers, electronic control circuit module type and monitoring panel. higher current produces higher losses in electrical motors which cause premature failure of winding. these higher losses of electric motors also increase the losses of cables, switches, transformers and other associated equipment. for smooth continuous operation of motors, over load relays are usually set at 20% higher setting.   with the installation of the stabilizer and maintaining 390/400 volts, the motor will operate smoothly drawing 15 - 20% lesser current and correspondingly the relay setting can be reduced by 15 - 20%. In case single phasing occurs, the relay will trip in 40 - 50 seconds. The motors can withstand the high current for this period and will be safe. Also, the relays, contactors, switchgears, etc. Incorporated with the motor will be safe.

Rest assured on us for the superfast deliveries that we carry out in the stipulated time span. We are counted amidst the well-known names based in Rajkot(India) and cater to every nook and corner.

We specialize in offering top notch High Voltage Controller to our valuable customers. Fabricated using advanced equipment; our Voltage Controller is appreciated for its high durability and efficient performance in differing industrial applications. We are also proficient in customizing the Voltage Controller to suit customer needs. We are a well-known Manufacturer and Supplier of High Voltage Controller from Maharashtra, India and provide them at competitive prices.Details : The most advanced microprocessor energization system ACE -16, designed specifically for electrostatic precipitators Self-diagnostics, intermittent energization, soft start Optimum control at the flashover limit, Back corona detection and control Greater efficiency in dust collection and significant power savings Communication with central command station/DCS/PLC/PC Automatic data logging and remote monitoring capabilities

We supply voltage controllers that is available in a capacity of 400 volts (three phase) and 230 volts (single phase). It is specifically used to protect the electrical and electronic equipment that are effected by the voltage fluctuation. Soured from leading manufacturers, our range finds usage in general laboratory equipment, c. N. C. Machines, escalators and elevators and air-conditioning plants.

Our company shares glorious credentials among the prominent Manufacturers, Suppliers and Exporters of Automatic Voltage Controllers.  The Voltage Controllers we make available results in considerable power saving and better utilization of existing transformers and cables. We have all the in-house facilities to deliver bulk orders of the Controllers within the stipulated time.   Range : 6.3KVA to 4000KVA   Advantages : Reduction in Breakdown of Electrical equipment. Considerable Power saving possible. Better Utilization of Existing transformer, cables etc. Mainteance of power factor and MDI. If the voltage is normally high. increase in productivity and better efficiency in plant due to less production losses. 80% Depreciation as per income tax Act.   Benefits of Installing Automatic Voltage Controller on Lighting Load : By maintaning 365-380/210-220 Volts, Three / Single Phase output through Automatic Voltage Controller for lighting load, there will be definite saving in power bill & reduction in failure rate of lighting equipments. Higher the input voltage more will be the savings. The overall effect on the brightness of the lamp at 210/220 volts will be negligible.   Applications: Though Stabilizers are useful for any kind of application, these are most suitable for 24 hour continuous process plants where breakdowns due to fluctuations results in heavy financial losses. These include : Cement Plants, Flour Mills, Engineering Units, Pharmaceutifcal units, Pharamaceutifcal units, cold storage, Multiplexes, Rolling Mills, Textile Mills, Paper Mills, Tube Mills, Rice Shellers, Call centers Rubber industries, tEa Estates, Food Processing Units., Oil & Vanaspati Plants, Footwear & Leather Units, Research Stations, Distilleries, Food & Beverages plants, Hospitals, Nursing Homes, clubs, Hotels, High Rise Buildings etc.   Comparison Between GTB Make and Conventional Make Automatic Voltage Controller - GTB Make Roller Type Regulator Power Consumption is 0.5 to 1.5% depending upon the model & Input voltage variation. Suitable for continuous 100% duty cycle. Life at full load is 15-20 years. Five years unconditional guarantee. Negligible losses in full boost & buck conditions.   Conventional make with Carbon Brush Regulator : Power Consumption is 2 to 7% depending upon the model & input voltage variation.l Suitable for only 30% to 40% duty cycle. Maximum life is 2-3 years at full load. Normal guarantee for one year. Max. Losses in full boost and buck condition.