Water Flow Switch Dealers

Models FQSFor use on liquid lines such as water, ethylene glycol, or any non-corrosive fluid in chillers, pumps, condensers, boilers, etc.With S.P.D.T. contact mechanismPaddle consists of three segments that can be removed or trimmed for use in 1 to 6" pipeDrip proof models: Available upon request.

Water purification and water treatment plants Booster pumps Fast shut down on high input boilers to guard against circultion failure Cooling systems for electronic tube,bearing SPECIFICATIONS Connection size:25mm (m) BSP Connection type:on-line type Max. liquid pressure:150 P.S.I.G. Max. liquid temp.:60OC Min. liquid temp.:5OC Compressor can be used any where,who wants to take flow, no-flow signal

The paddle type SPDT WFS series are designed to provide excellent performance where accuracy, reliability, and rugged construction are required used in liquid flow lines carrying water or any fluid neither harmful to brass and prosphor bronze nor classified as a hazardous fluids. They can be wired to close one circuit and open a second circuit when liquid flow either exceeds or drops below the adjusted flow rate. The WFS series are recommended for liquid pressure and temperature as mentioned below and must not be used on lines carrying liquids below 0°C. These series may be used on liquids with high salt or chlorine content but is not for use in hazardous atmospheres. They may be also used outdoors but must be protected from weather or splashing water.

Our domestic flow switches range includes water flow switch & hot water flow switch. The domestic flow switches manufactured by us help to eliminate dry run of water pump & also avoid damage to heaters due to lack of water.By using Mukund make Flowtech thermal flow switch, this problem could be overcome. The flow switch is installed on the pump suction line. Hence monitoring all the time water flow from suction line of pump. This gives a unique advantage of actually monitoring the primary parameter to protect dry run of the pump, hence increasing it life and protecting its motor.

The paddle type SPDT WFS series are designed to provide excellent performance where accuracy, reliability, and rugged construction are required used in liquid flow lines carrying water or any fluid neither harmful to brass and prosphor bronze nor classified as a hazardous fluids. They can be wired to close one circuit and open a second circuit when liquid flow either exceeds or drops below the adjusted flow rate.The WFS series are recommended for liquid pressure and temperature as mentioned below and must not be used on lines carrying liquids below 0 ºC. These series may be used on liquids with high salt or chlorine content but is not for use in hazardous atmospheres.They may be also used outdoors but must be protected from weather or splashing water. All series WFS flow switches are designed for use only as operating controls. Where an operating control failure would result in personal injury and/or loss of property, it is the responsibility of user to add safety devices that protect against, or supervisory systems that warn of control failure.

Water Flow Switch WFS-6000 The Switch is used to monitor flow rate in pipes for all HVAC applications Paddle-type SPDT water Flow Switch Recommended for monitoring liquid flow status Sensitivity adjusting screw makes flow adjustment easy Liquid flow switches : also suitable for oil, cooling circuits and lubrication system