PH Indicators Dealers

High degree of accuracy 0.01 pH Automan. Temp. Compensation Auto buffer for quick analysis. High input impedance.Isolated Transmitter for remote monitoring.Front Panel calibration of pH-4 and pH-7.Optional printer interfacing.Panel Mounting flame-proof enclosure.

MicroSet Instrumentation & Controls reserves the right to make changes to this data sheet or the product without notice, as part of our policy of continued developments and improvements.  

Item Code:DPH-509 Being a customer-focused organization, we are engaged in offering Online pH Indicator. Advanced technologies and quality raw material are widely used in manufacturing these pH indicators. These are widely widely used in laboratories and widely used as a reagent for staining. Features: External Transmitter near electrode for areas where Instrument is at distant location High Input Impedance with very low Input Current Solution Ground referenced measurements Available in Panel Mount, Wall Mount & Flameproof enclosures

Bromocresol Purple ACS Grade, ACID RED 18, Brilliant Blue Fc

CPH 100 instruments use a special high input impedance input stage for fast and accurate pH measurement. Special electronics ensure that the input impedance is in excess of 1012 ohms. Thisensures that there is minimum error due to the extremely high output impedance of the pH sensors. Since pH is a function of Temperature a PT100 RTD type input is provided for temperature measurement. Temperature compensation can be programmed for each 5 Deg segments. Relay output sare provided for a larm indication as well as control action. Automatic calibration is provided for fast field calibrationOptional features. include RS485 with MODBUS networkcapabilities.Optional 4-20mA output can be programmed between any desired.

Micro Controller Based,Auto Temp. Sensing,Buzzer for Low High pH control,12 V DC output for auto dozing dump. On line pH indicator specially designed for various process control industry.

GENERAL DESCRIPTION Analogik PH meter and transmitter incorporates the latest high technological advancements. It has very stability, reproducibility & contineous duly cycle. The instrument having very high input impedance advanced (MOS-FET butter OP-AMP) The instrument accepts all types of PH electrode. Auto / manual temp, compensation facility is available. The instrument indicates PH by 3 1/2 digit LED / LCD display. FEATURES Manual / Auto temp, compensation by pt-100 sensor. Direct indication of PH/ mV and temp, by LED/LCD displays. Slope control for correcting electrode slope. Asymetry control to eliminate ageing offect. 0 / 4 to 20 mA output into 500 V incase of PH transmitter. CONSTRUCTION & OPERATION The glass epory, green masked, PCB with high quality components soldered gives the drift free performance. The mV signal from PH electrode is directly given to high I / P impedance buffer amplifier and then this signal is processed. The auto/manual temp, compensation circuit is added at this stage & signal is given to DPM / V to I connector. Thus we get PH indication or 0 / 4 to 20 mA signal proportional to input pH. APPLICATIONS pH meter and PH transmitter are commonly used in many industries & plants. Used in water treatment plants, Power Station, Sugar Mills, Steel Plant, Paper Industry, Chemical, Petro Chemical, Food, Fertiliser, Soft Drink Industries. SPECIFICATIONS pH INDICATOR pH TRANSMITTER RANGE O to 14H. 1999 mV Oto14PH. DISPLAY OUTPUT 3 1/2 digit LED or LCD 3 1/2 digit LCD-local indication optiona 0/4 to 20mA proportional to 0 to 14 PH. ACCURACY 0.25% of F. S. 0.25% of F. S. TEMP.Compensation Automatic with pt -100 manual by pot Oto130°C. 0 to 130 °C. Automatic only. INPUT IMPEDANCE SUPPLY >1012Ohms. 9 VDC, 230 V AC, 50 Hz 1 PHASE >1012Ohms. 9 VDC, 230 V AC, 50 Hz 1 PHASE SLOPE ADJUSTMENT 90 to 110% at 25 °C. 1 90 to 110% at 25 °C. 1 ASYMETRY ADJUSTMENT 1 PH. 1 PH. OUTPUT LOAD - 500 V Max. RECORDER OUTPT  

High degree of accuracy 0.01 pH Auto/man. Temp. Compensation Auto buffer for quick analysis. High input impedance.Isolated Transmitter for remote monitoring.Front Panel calibration of pH-4 and pH-7.Optional printer interfacing.Panel Mounting flame-proof enclosure.  

The ph meter or controller is also used in the cosmetics industry in which the chemicals used in the cosmetics products are checked using a Instrument so that the harsh chemicals do not hamper the skin. Even though the skin has a ph but if harsh chemical products are used on the skin, the ph may be disturbed causing rashes and itching, so industries making cosmetics which are used on face and hair, keep a strict check on the ph using the PH Meter.

The pH Indicator which we offer is specially designed for water treatment and swimming pool applications where both pH and ORP need to be monitored. There are two separate adjustable set points in the pH Indicator for pH and ORP. Once the pH set point is exceeded, the appropriate LED light will come on to alert the operator of the pH Indicator. pH Indicator Features : LED alarm signalsContinuous monitoringDisplays pH and mV simultaneouslyAdjustable set points About pH Indicator : Once the pH set point is exceeded, the appropriate LED light will come on to alert the operator. Likewise, once the ORP level drops below the set point, the red ORP light will stay on.HI 981406 is supplied with HI 1283 ground probe. The HI 1283 ground probe provides users with more reliable readouts by suppressing current effects, which are found in pools. The optional HI 2114P/2 pH electrode and HI 3214P/2 ORP electrode are designed specifically for swimming pools. Both probes are constructed with a specially designed fiber salt-bridge making each particularly resistant to clogging in pools. Order Information : HI 981406-01 (115V) and HI 981406-02 (230V) are supplied with HI 1283 grounding bar, HI 70004 pH 4.01 buffer solution sachet, HI 70007 pH 7.01 buffer solution sachet, calibration screwdriver, 12 VDC adapter and instructions. » Specification RangepH0.0 to 14.0 pHmV-999 to 999 mVResolutionpH0.1 pHmV1 mVAccuracypH±0.2 pHmV±5 mVOther DetailspH Calibrationmanual, 1 or 2 pointsSetpointpH: adjustable from 5.0 to 9.0 pH;ORP: adjustable from 350 to 850 mVAlarm2 LED's (1 for pH and 1 for ORP) light up when:pH value > setpoint and/or ORP value < setpointProbeHI 2114P/2 replaceable pH electrode (not included)HI 3214P/2 replaceable ORP electrode (not included);HI 1283 potential matching pin with 2 m (6.6') cable (included)Input Impedance1012 OhmPower Supply12 Vdc power adapter (included)Environment0 to 50°C (32 to 122°F); RH max 95%Dimensions165 x 110 x 35 mm (6.4 x 4.3 x 1.4")Weight300 g (10.6 oz.) »Accessories ElectrodesHI 1283Grounding Bar with 1 m (3.3') CableSolutionsHI 70000PRinsing Solution 25 x 20 mL sachetsHI 70004P4.01 pH Buffer Solution, (25) 20 mLHI 70007P7.01 pH Buffer Solution(25) 20 mL sachetsHI 7020MORP Test Solution at 200/275 mV (@20oC)1 x 230 mL bottleHI 7091MReducing Pretreatment Soluti1 x 230 mL bottleHI 7092MOxidizing Pretreatment Solution1 x 230 mL bottleHI 70300MElectrode Storage Solution1 x 230 mL bottleHI 7061MGeneral Purpose Cleaning Solution1 x 230 mL bottleAccessoriesHI 710005Power Adapter, 115 Vac to 12 VDC, US PlugHI 710006Power Adapter, 230 Vac to 12 VDC, European Plug

The integrated voltage detecting system LLI conforms with the requirements for voltage detection systems ofthe valid VDE 0682 Section 415 (IEC 61243-5). It is a 3 Phase system with which the following conditions of a medium voltage network are indicated: Voltage not present : No indication Voltage Present 1 Arrow shown for each phase with L1, L2, L3 description Design: The integrated voltage detecting system LLI is located in a panel mounted housing, The display is designed as an LCD in the front, the symbol arrow, corresponding to voltage presence is shown in black. arranged on the front panel are also a LRM test point for connecting a phase comperator for LRM ~ interfaces. As protection against corrosion, the test point is provided with a captive plug. The unit works without external power, the display T LLl gets energised from the measuring signal.   FEATURES Operating temperature: -25 C to +70 C Storage temperature: -30 C to +80 C Protection class: lp54 Connectors for signal leads: fast-on receptacles 4.8 x 0.8 mm Required data for order: capacitance of coupling electrode C1 rated voltage U