Tyre Building Machine Dealers

We Manufacture Directly Driven Tyre Tread Building Machine. These Tyre Tread Building Machines are used for building and stitching procured treads, with electrically controlled panel board. Tyre Tread Building Machine is equipped with DC Motor for forward / reverse in various speed controls. Besides this, the Tyre Tread Building Machine also provides the facility of dual stage stitching for gum and tread. All the Tyre Tread Building Machines have pneumatically operated tread cutter and gum let-off.

• Driven Type: Electric
• Automatic Grade: Automatic
• Type: Tyre Building Machine
• Warrenty: 1year

• Country of Origin: Made in India
• Frequency: 50 Hz
• Bead Size: 28 Inch
• Brand: Goodwill Rubber

MACHINERY DIVISION PRODUCTS PCR Tyre Building Machines12-16” Size ( 2 Stage)14-20” Size ( 2 Stage) TBR Tyre Building Machine PCR TBM Toolings ( 12” – 20” Sizes) Retrofit of Cap-strip applicator on existing machines Wind-Up System TBR Bead Apexing Drum Auto Stock Loader

We make available Tyre Tread Building Machine in customized range and various specifications to suit the requirements of buyers’. Our company shares glorious credentials in the list of top Manufacturer and Supplier of Tread Builder. The Tire Tread Building Machine is quality checked on various well defined parameters by our quality auditors. Further, our Tyre Tread Builder Machines have high tensile strength and give long lasting performance.

• Brand Name: KMT
• Country of Origin: Made in India
• Weight: 800 Kg
• Features: Adustrable stitcher wheels linear speed, Forward & reverse tyre drive motion, Foot switch operated tyre drive control.
• Bead Size: 14 - 20 Inch
• Connected Load: 0.38 kW
• Air Consumption: 10 cfm at 125 psi intermittent, 50 cfm at 125 psi while inflation

• Country of Origin: Made in India
• Tyre Type: Motorcycle & Scooter Tyre
• Tyre Construction: II Stage Radial
• Required Air Pressure: 8 Kg/cm2
• Bead Size: 14-18 Inch

A precisely-positioned material infeed from the unwinders, accurate web guiding from the loop, high-precision web guiding on the ply server drum and intelligent geometry-related control algorithms on the belt server represent the key components of the BST eltromat tire building control systems. Lasermarker systems are completing the product portfolio.   A precisely-positioned material in-feed from the unwinder, accurate web guiding from the loop, high-precision web guiding in the immediate vicinity of the drum on the ply server, and intelligent geometry-related control algorithms on the belt server represent the key components of the BST eltromat control systems developed especially for tire building machines. The base element of these control systems is the high-resolution CCD CAM 100 camera.   Winder Guiding System : The SmartGuide.WF ensures the controlled unwinding and rewinding of material and liner. Adoptions to individual conditions can be realized due to a large range of proven components, such as sensors and actuators.   Alternative: Guiding from Loop: Realizes edge or center-line guiding of material webs. A lateral movement of the roller is correcting the material position. The principle is specially made for start – stop applications.   Laser Marker: In result of the recipe data the NCA Laser 100 indicates the correct edge position of the material.   Plyserver Guiding: The BST eltromat camera CCD CAM 100 allows in combination with light sources, developed especially for its positioning as near as possible at the drum the best material positioning result.   Beltserver Guiding: Intelligent software solutions with high performing mathematical procedures allow in combination with the high performance camera CCD CAM 100 the maximum belt guiding precision.

• Country of Origin: Made in India
• Condition: New
• Bead Size: 10 - 26 Inch
• Main Motor Rating: 2-5 HP
• Required Air Pressure: 5-10 kg/cm2
• Tyre Construction: II Stage Radial

A precisely-positioned material in-feed from the unwinder, accurate web guiding from the loop, high-precision web guiding in the immediate vicinity of the drum on the ply server, and intelligent geometry-related control algorithms on the belt server represent the key components of the BST eltromat control systems developed especially for tire building machines. The base element of these control systems is the high-resolution CCD CAM 100 camera.

• Country of Origin: Made in India
• Tyre Type: Motorcycle & Scooter Tyre
• Bead Size: 17" and 18"
• Required Air Pressure: Air pressure
• Phase: Three Phase

• Applicable Tyre: Bicycle
• Drum Diameter: 16" x 28" / 10" to 14"
• Control System: (PLC control) (Manual. auto)
• Height of drum center above floor: 900mm
• Main Shaft Motor: AC 5HP 4p
• Required Air pressure: 6kg/cm2
• Electrical Power: 440 V 50 Hz
• Dimension: 2200 x 2100 x 1600 mm
• Fully Programming PLC control:  

Our tyre building machine is based on high efficiency tyre building process, high uniformity of tyre built and high level of automation. We use unistage 3-drum technology having carcass building drum, belt building drum, shaping drum, carcass transferring and belt transfer ring aligned in single axis. It posses high-capacity reels for sidewalls, steel chafer, innerliner, steel cord, shoulder cushion and belts. It also has automatic measuring function and cutting system of the pre-assembled profile (sidewalls & innerliner), carcass, shoulder cushion and belts. The machine is well equipped with PLC configuration having distributed control system software with fault diagnostics, technological parameters setting and also recipes management.

• MAX DRUM DIA (MM): 400

Our tyre building machines incorporate state of art PLC control. Complete operation is programmed and autojog facility is available. Position control through pulse encoder in conjunctions with PLC ensures productivity, precise control, improved quality and easy setting. In auto mode after execution of each step, only one common step execution push buttonfoot switch is actuated to execute next step.Step number display is provided.

rubber presses, tyre shredder, bale cutter, rubber testing equipments

cold feed extruders, Lab Calender Machines, Rubber Cracker Mill, bias cutter

tyre retreading materials, Tubeless Tyre Repair Kit, tyres machinery

• Type: Semi Automatic
• Brand Name: AMCL
• Certification: ISO9001-2008
• Voltage: 440
• After-Sales Service Provided: YES
• Packaging Type: YES
• Model Number: RB-2022, RB-1619 , RB-5 , RB-3, RB265 ,
• Place of Origin: NAGPUR

We are offering tyre building machines. These machines are used to make green tyres from raw rubber mixed with various additives , for trucks, buses , lcvs & tractors.

tube curing press machine, transformer box, Tube Curing Press

Rubber Moulding Hydraulic Press, Rubber Mixing Mill, baise cutter

Rubber Refiner Mill, Rubber Grinder Mill, Rubber Cracker Mill

bicycle tire automatic building machine, Hydraulic Machines

tyre mould machine, Tire Machines, Tyre Flaps, tyres machinery

Wide Inner Ring Bearing, EDM Machining

tyre building machinery, Drums

tyre retreading plant, Tyre Electric Chamber, Tyre Buffing Machine

Tyre Buffing Machine, Compressor, TYRE EXPANDABLE HUB, Tyre Accessories