A.P. Engineers Perundurai, Erode, Tamil Nadu

For evaporator concentrate water, vertical thin film dryer are used to separate salts by evaporation. Concentrate is sent to dryer and evaporated completely. Un evaporated solids such as salts and impurities are collected at bottom. This system reduces need for solar pond. Our dryer is unique in design and operate continuously. It's in build scrapper mechanism removes salts, deposited on inner surface of dryer and removed by conveyor. Our special screw mechanism and unique rotary valve enables system run under vacuum. This system used to most of salts separation without need of pusher centrifuge centrifuge and recycling of water. Further it gives ready to pack salts and handle high scaling liquids.

Country of Origin : India

We are the prominent manufacturer and supplier of Ultrafiltration & Reverse Osmosis Plant. In order to fabricate this plant, we use the finest quality raw material that is quality tested. The offered Ultrafiltration & Reverse Osmosis Plant are designed keeping in mind the international quality standards. Further, it is widely used to filter heavy element, such as iron silica and heavy organic loads that caters water that has less than 0. 5 ntu turbidity. This is available with automatic backwash systems that ensure frequent cleaning of the system. Owing to their quality features, such as robust construction, corrosion resistance, durable finish standard and high tensile strength, our offered plant in highly demanded in the market. Specifications: Used for fine treatment of treated effluent to make it suitable for RO plant. UF plant from 20 kld to 4000 kld plant for RO processing application. UF with plc based automatic backwash system to run plant automatically. Ultra filtration have very fine pores of 0. 01 micron to 0. 005micron. It prevents heavy metal fouling and organic fouling. Reverse osmosis plant are salt rejection unit, that reject 95% of salt in water with 99% rejection of divalent ions. Composite poly amide membrane has 0. 001 micron size and rejects salt as a result of osmosis pressure. Reverse osmosis plant is used for recovery of water. In first stage 70% of water is recovered and in remaining stages up to 92% of water is recovered. Final reject have high tds water and evaporated in evaporator. 20kld to 4000kld plant with micro processor plc based control system. It trips shuts down against low pressure, high pressure, high conductivityorp, etc.

Our Tertiary Effluent Treatment Systems such as Tertiary Clarifier with inbuilt flocculation chamber gives clear treated water from biologically treated water. Using Tertiary Clarifier, we ensure outlet water Turbidity is less than 5NTU, which is suitable for UF and RO Feed. Further, Multi grade sand filter removes suspended solids, partial removal of iron and silica.We offer PLC based automation for sand filter that operates time depended and differential pressure difference. So that it do automatic backwash with flushing as per our requirements. Our PLC operated Ultra filtration gives treated water with less than 0.5 NTU turbidity, and SDI less than 5. which is suitable for Ro Plants. We offer partial and fully automated effluent treatment plant as per customer requirements that controlled air blower with Dissolved oxygen monitoring, Centralized dosing systems etc.Effluent output of treated water parameter with power saving by variable frequency drive, chemical saving by automatic adjustments. It gives constant and desired output of required water parameter. It gives uniform feed to RO plant and performance of RO plant is stabilized.

Country of Origin : India

Our stainless steel tanks are meticulously crafted using premium-grade SS304,SS316,L,ETC material, ensuring exceptional resistance to corrosion and contamination. We employ advanced manufacturing techniques and stringent quality control measures to guarantee the structural integrity and longevity of our tanks.We offer a comprehensive range of stainless steel tanks tailored to a variety of applications, including:Chemical storage: Safely store and transport a wide range of chemicals, from mild to aggressive, without compromising the integrity of the tank or the stored substances.Food and beverage processing: Our food-grade stainless steel tanks are ideal for storing and processing food and beverage products, adhering to strict hygiene standards and preserving the quality of your products.Pharmaceutical manufacturing: Our tanks are extensively used in the pharmaceutical industry for the storage and preparation of pharmaceutical ingredients, ensuring compliance with stringent regulatory requirements.Customized Solutions to Meet Your NeedsWe understand that every industry and application has unique requirements. Therefore, we offer customized stainless steel tanks to cater to your specific needs, including:Varied capacities: Choose from a wide range of tank capacities to suit your storage requirements, from small-scale laboratory tanks to large-volume industrial tanks.Diverse configurations: We offer a variety of tank configurations, including vertical, horizontal, and cylindrical tanks, to optimize space utilization and process efficiency.Advanced features: We can incorporate additional features such as agitators, heating coils, and insulation to meet your specific process requirements.

Shape : Round

Condition : New

Country of Origin : India

The Sewage Treatment Plant process is similar to the way that a Septic Tank works but mechanical components provide a process to help break down solids to produce a cleaner, more environmentally friendly effluent.These plant are collective in a prefabricated; skid mounted or containerized tank system with variable sizes for easy transportation. Special   Features : All-in-one single tank packaged sewage treatment plant. Modular design : 5 - 100 m3/day Compact and simple to operate Minimal maintenance No corrosive components Advantages Minimal land usage Minimum power and chemical requirement Easy to install, monitor and relocate

Driven Type : Electric

Condition : New

Automatic Grade : Automatic

Application : Industrial

A.p.engineers offer wide capacity of ro plant for industrial water reuse, drinking water applications & bottling plants. We provide ro plant using brackish water membrane, sea water membrane, and softening composite membrane. We offer plant with recovery up to 90% of feed effluent. Our design is basis of software design provided by membrane manufacturers. We de-sign carefully by considering flux, beta factor, minimum flow rate per vessel, pres- sure, feed tds, scaling and fouling tendency etc. Further we consider maximum tds and other parameter for operating in peak environment. We provide ro design with plc & vfd program with pressure exchanger, turbo for power savings. With also it ensures safety against low pressure in feed, high pressure in delivery, variation in feed water parameter such as ph, orp etc.

Finishing : Polished

Driven Type : Electric

Condition : New

Product Description: Owing to our expertise in this domain, we are offering superior quality Multiple Effect Evaporators. The offered protein recovery evaporator is widely used for fish meal industry for high salt water, high organic load waste water evaporation purpose. Designed with waste heat source, such as drier hot air, process waste steam, etc. In Multiple effect evaporator the set industrial norms, our offered range comes in various meet with lpg firing system, steam, hot air, etc. which clients can choose from as per their requirement. We can also customize this range as per the details provided by the clients.   How it Works : Water is boiled in a sequence of vessels, each held at a lower pressure than the last due to which the boiling point of water decreases as pressure decreases. The vapor boiled off in one vessel can be used to heat the next, and only the first vessel (at the highest pressure) requires an external source of heat. MEE available in 30 kld to 200 kld used for various industries

Material : Stainless Steel

Country of Origin : India

We are a. P. Engineers, have more than 20 years experience in pollution control equipments and involving waste management, water and waste water treatment industries. We offer wide variety of solutions to solid waste management such as incinerators with heat recovery solutions in "greenmax" brand. Our incinerator installation capacity are 25kghr to 150kghr and more is available. Our experienced engineering team enable us in designing of various capacity of incinerator and heat recovery solutions with easy operation and maintenance. Our production unit produce incinerator with suitable materials and as per engineering design with quality for ensuring long life with trouble free operations. Our service engineers supports customer end training, periodical maintenance of plant and any operation troubles. These enable us a good and strong customer relationship for long durations. Our product are manufactured as per our iso 9001 quality management system and ensure its performance for customer satisfactions. With also, it ensure pollution control norms. We have our own manufacturing unit in perundurai, near erode and coimbatore with latest welding technology and experienced manufacturing team. Service & support we provide good service and support after sales. We give one year warranty of our manufacturing products against any manufacturing defects .we also give training for operation and maintain ace during installation period . Further we supply spares, chemicals additional training maintenance of incinerators on request. We are supporting 24x7 with our service engineering team.

Condition : New

Automation Grade : Automatic

Application : Industrial Use

Country of Origin : India

We are offering high pressure cleaning pump. In evaporator, scaling is major problem that reduce evaporator capacity. Calcium, magnesium, sil-ica are major contributes for scaling. Calcium carbonate, magnesium carbonate magnesium hy-droxide are high temperature sensitive scaling that chock on first calendria. Calcium sulphate, magnesium sulphate are low temperature sensitive scaling that chock last calendria.

Country of Origin : India

In industries, heat is recovered from many processing units such as hot air drier, oven, cooker etc., by waste heat recovery evaporator. This type of evaporator is flexible and allows running on various load. Depend on heat load, it evaporate feed water. No requirement for steam. This type of evaporator designed carefully, such that it will not disturb heat source such as hot air drier, oven etc by back pressure or resist hot air flow rate. Further hot air flue gas is cooled and sent atmosphere. This type evaporator suitable for concentration, effluent management, protein recovery plant etc. We designed our evaporator with by- pass arrangement for evaporator maintenance. Further evaporation depend on heat load, system designed to withstand maximum heat load in system. We installed many waste heat recovery evaporator 40kld to 200kld capacity for fish meal industries.

Brand Name : apengineers

We are a. P. Engineers, manufactures of special vinyl ester frp tanks for storage of acids, oils, corrosive chemicals, solvents, frp reaction vessels etc. We are manufacturing frp vessel for various size for storage application, process and production application etc. We supplied our frp tank for fish oil storage, flavors preparations, acid storage etc, to various industries. We offered general fiber resin (grp) coating for sand filter, carbon filter, water storage tank, civil tank, ultra filtration pipe line etc, for water with high tds salt applications and very little usage of acids, alkali applications. We offered vinyl ester, isopthalic, terpthalic, bisphenol resin based frp materials depend on applications such as corrosive acids, solvents, high tds salt water applications, solvent, alkali applications, chemicals and intermediate applications etc. Further we offered 50litre to 50,000 liter frp tank and more capacity on request. Further we offered frp work on metal and pvc, upvc, cpvc pipe, for leakage, leak proof work, repairing work, etc. We offered drinking water storage tank in various size and model, ro cleaning tank, ferrous mixing tank, alum mixing tank, acid dosage tank etc, for usage of etp, process applications. We offered frp tank designed with engineering to withstand load on storage for long terms, necessary supports and stand for holding tank, with manhole for cleaning and inside maintenance, vent, overflow arrangement, required size nozzle etc. It is perfectly suitable for open space - direct sunlight applications and withstand all type of weather including heavy rain. We offered tank with three layer coating of glass fiber mat with minimum thickness of 4mm. On request, we can offer multiple layer with required thickness for frp vessels.

Brand Name : APE

Material : FRP

Country of Origin : India

In Forced Circulation Evaporators water is distributed in tubes like a fine film layer on surface of tubes. Due to less wetting in surface and scaling, fouling materials will form a layer of insoluble scale that reduce its evaporation capacity. During evaporation, scaling materials such as calcium, magnesium & silica salts are forms quick and insoluble layer of scales. This will reduce heat transfer and affect system performance. For that, we recommended forced circulation system.In that design, feed is flow inside of tube with tube filled condition and with high velocity and pressure. Due to velocity and pressure, boiling on tube surface is reduced. Pressure inside of system is maintained to avoid boiling inside of tube by vapour head pressure. Further velocity in forced circulation keeps surface on wiping and cleaning. This will not allow developing scales on surface by force of feed water.Feed vapour is separated in vapour separator. Further, with forced circulation system, we can run system with semi slurry conditions with very high concentrations There is no boiling on calandria and heating only happened in calandria. Boiling happened in vapour separator and concentration without scaling is achieved. Further high concentration water and semi slurry water is processed.This will help to separate salt by crystallizer, pusher centrifuge or dryer. By forced circulation system, we can achieve zero discharge system effectively. We installed many forced circulation system up to 80kld capacity. This system is used to high fouling, scaling water, salt separation by crystallizer and pusher centrifuge.

Material : Stainless Steel

Application : Chemical Industry, Food Industry, Pharmaceutical Industry, Water Treatment Industry

Number Of Flower : Evaporator

Country of Origin : India

We are A.P.Engineers, Manufacturers of Fish meal Machinery with complete turnkey erection and commissioning work. We will offer complete solutions required for fish meal plant from Loading Point to Final Powder packing and storage. it includes Cola water treatment and Effluent treatment as per Pollution control norms. We offer machinery such as Fish conveyer for Loading of fish in SS, Cooker, Press, Decanter, Centrifuge, Dryer, Cooler, Crusherhammer mill, Weighing and packing machine in manual mode, automatic mode, Fish oil storage tank, Effluent treatment plant for vehicle washing water and waste water treatment, Cola water concentration by evaporator and reuse, Boiler for operation of plant, Generator, Civil and shed work etc as turnkey project. As per customer requirements, all parts of fish meal processing is arranged as fully SS, and SS with MS for Dry product etc. we offered trouble free operation of plant sequence with minimum man power required for entire plant. We offer training and maintenance for trouble free operation of plant, and periodical maintenance, shut down maintenance, revamping existing plant, modification of existing plant, increasing plant capacity etc. We have experienced team with site erection work, and full pledged production capacity for manufacturing of equipments enable us to timely completion of entire project with perfection on commissioning and running of plant.

Material : SS

Condition : New

Automatic Grade : Automatic, Semi Automatic

Total Carbohydrate : 1 Year

Country of Origin : India

Warrenty : 1

In Forced circulation system, liquid is circulated with high pressure and velocity. For that, we need high energy and heavy recirculation pump. For that, we offer combination of Film Forced Circulation Evaporators. This will help to avoid scaling due to high concentrations. This combination system is more efficient in high salt water where as insolubility increases with higher concentrations. We offer two falling film with one forced circulation system, three falling film with one forced circulation system to achieve desired concentration without scaling in last calandria. In our design, there is no need for additional steam for forced circulation. With also power saving is achieved by combination system.

Material : Stainless Steel

Country of Origin : India

Falling Film Evaporators, water is boiled in a sequence of vessels, each held at a lower pressure than the last. Because the boiling point of water decreases as pressure decreases, The vapour boiled off in one vessel can be used to heat the next, and only the first vessel (at the highest pressure) requires an external source of heat. This is called multiple effect and no of stages / effects is depend on quantity of vessel / calandria in sequence.Theoretically, one kg of steam evaporates one kg of water. In multiple effect evaporator, one kg of steam evaporates up to 6 kg of water by no of effects and vapour recirculation by thermo vapour recompressor. It is called as steam economy 1:6. Feed is preheated to nearby boiling temperature in Pre heater that connected with all calandria. All calandria are operated at stage by stage vacuum with reduced temperature. So feed is preheated by stage wise from lower temperature to higher. Then it is passed via first calandria tube bundles as fine film layer over the tube surface area. In shell side fresh Steam is given via Thermo Vapour Compressor. Feed is heated and evaporated in calandria. Evaporated Vapour is separated in Vapour Separator, vapour is sent to second calandria Shell side. Un evaporated feed is transferred to second calandria tube side.Here further evaporation is done. So each calandria evaporates feed and concentrate coming out from last calandria. In this system, concentration is achieved by stage by stage and each calandria have higher concentration as stage increases. A part of evaporated vapour is recycled to first calandria via thermo vapour recompressor. In Thermo Vapour Compressor, Fresh Steam with pressure is passed via steam nozzle. Steam produce high velocity and produce a venturi Effect.This will recirculation a part of evaporated vapour.

Condition : New

Automatic Grade : Fully Automatic

Application : Industrial

Country of Origin : 220V

We are offering multiple effect evaporator, water is boiled in a sequence of vessels, each held at a lower pressure than the last. Because the boiling point of water decreases as pressure decreases, the vapour boiled off in one vessel can be used to heat the next, and only the first vessel (at the highest pressure) requires an external source of heat. This is called multiple effect and no of stages effects is depend on quantity of vessel calendria in sequence. Theoretically, one kg of steam evaporates one kg of water. In multiple effect evaporator, one kg of steam evaporates up to 6kg of water by no of effects and vapour recirculation by thermo vapour recompressor. It is called as steam economy 1:6. Feed is preheated to nearby boiling temperature in pre heater that connected with all calendria. All calendria are operated at stage by stage vacuum with reduced temperature. So feed is preheated by stage wise from lower temperature to higher. Then it is passed via first calendria tube bundles as fine film layer over the tube surface area. In shell side fresh steam is given via thermo vapour compressor. Feed is heated and evaporated in calendria. Evaporated vapour is separated in vapour separator, vapour is sent to second calendria shell side. Un evaporated feed is transferred to second calendria tube side. Here further evaporation is done. So each calendria evaporates feed and concentrate coming out from last calendria. In this system, concentration is achieved by stage by stage and each calendria have higher concentration as stage increases.

Condition : New

Automatic Grade : Fully Automatic

We are offering effluent treatment plants. Backed by a team of experienced professionals, we are manufacturing and supplying superior quality effluent treatment plants (etp plants). Available in a huge variety, effluent treatment plant is used to remove industrial process impurities and recycle water. These are applicable in several industries like textile industry, powder coating, electro plating, fish meal industry, etc. We offer these plants to our clients in a diverse capacity, such as up to 4000 kld. Also, we can customize these plants in accordance to client specifications and provide them at market leading prices.

Brand Name : A p

Material : Ss

Country of Origin : India

A.P.Engineers supplied many drinking water RO plant for garments, schools, company canteen etc. our drinking water RO plant designed with semi automation and full automation with micro- processors controlled panel board. Our RO plant controlled by microprocessors with float for raw water tank empty and treated water tank full, Low pressure switch & high pressure switch, conductivity meter, solenoid valve, dosing pump, high pressure pump, feed pump, cleaning pump etc. By our design, total system is free from operator requirement. It automati-cally stop with raw water tank empty and product water full. Similarly high pressure pump, membrane are safe by low pressure switch and high pressures witch. This switch is keep safe high pressure pump from dry running, avoid membrane damage due to high pressure, pressurerising due to scaling etc.our solenoid valve flush RO plant periodically so that scaling and fouling is avoided. In our microprocessors controlled panel board display, product TDS, feed pump current, high pressure pump current, dry run cur-rent, flushing interval etc are arranged and shown in display. Our plant is suitable for high TDS (up to 5000 TDS) and high scales (2500 ppm of total hardness) water. Our design is created with membrane manu- facturer software and designed with optimal flux, beta factor etc. Top of Form Bottom of Form

For textile industries, sodium sulphate salts are used for dyeing process. This salt is concentrated by evaporator up to 1.20 sp.gravity (nearly 22% salt content) and separated by adiabatic crystallizer. This crystallizer reduce temperature by adiabatic evaporation and reduce its solubility less then 5gram per litre from 22gram per litre. Insoluble salts are crystallized as Na2SO4.10H2O. this salts are separated in nutch filter and reused to process. For sodium chloride and other salts, salts are separated from slurry solutions by gravity in conical clarifier and further separated by pusher centrifuge / centrifuge. We supplied crystallizing unit for various type of salts and products.

Our Secondary Effluent Treatment system such as Aerobic and anaerobic plant design that meets fluctuation and peak load in system with best reduction in organic load with removal of colour and turbidity. Our Biological System gives up to 98% reduced chemical oxygen demand, biological oxygen demand with odorless output water.This will suitable for most of Reverse osmosis plant and avoid organic fouling in system. We offer anaerobic plant for high and heavy organic effluent. It digest and simplify complex organic matter in to simple and digestible organic forms.

Country of Origin : India

Driven Type : Solar, Electric

Condition : New

Automatic Grade : Automatic

Driven Type : Electric

Condition : New

Automatic Grade : Automatic

We are engaged in providing Turnkey Project Servicesin the establishment of various industries like fish meal industry, textile industry, pharmaceuticals industry, etc. Our offered service includes site civil planning, machinery arrangement, process pipe line arrangement, etc. Further, we use the latest technology and premium quality material to provide these services. Our experienced professionals take extra care of every detail to ensure the satisfaction of our valued clients. Moreover, we provide these Turnkey Project Services at market leading prices to our client

To hold expertise in this field, we are providing Engineering Consultancy Services to our clients. We deliver these Engineering Consultancy services with the help of experienced professionals who provide resourceful solutions for industrial trouble shooting with required data, drawings and technical details.