Identification Systems Dealers

The Biolog Microbial ID System can rapidly identify over 2,500 species of aerobic and anaerobic bacteria, yeasts and fungi. These easy to use systems provide reference laboratory quality identifications. Biolog Systems do this without the labor-intensive requirements of conventional strips or panels. There is a Biolog System for any size laboratory, from full and semi-automatic to manually read systems.

Multi-biometric Identification Time Attendance and Access Control Terminal CPU: Multi-Bio CPU 1.0 GHz Camera: High Resolution Infrared Camera Display: 4.3″ TFT touch screen Fingerprint Sensor: 500 DPI Optical Sensor Fingerprint Capacity: 2000, Card Storage: 10,000 Face Capacity: 1,200 (l:N), 3000 (1:1) Transaction Capacity: 1,00,000 Inbuilt Proximity Card Reader Communication: TCP/IP, RS232/485, Two USB-host Access Control: Supports EM Lock, Exit button Wiegand Signal: Output Power Supply: 12V, 3A Verification Speed:

Global Positioning System (GPS) satellites broadcast signals from space that GPS receivers, use to provide three-dimensional location (latitude, longitude, and altitude) plus precise time. GPS receivers provides reliable positioning, navigation, and timing services to worldwide users on a continuous basis in all weather, day and night, anywhere on or near the Earth. This ultra-sensitive GPS receiver can acquire GPS signals from 65 channels of satellites and output position data with high accuracy in extremely challenging environments and under poor signal conditions due to its active antenna and high sensitivity. The GPS receiver’s -160dBm tracking sensitivity allows continuous position coverage in nearly all application environments. The output is serial data of 9600 baud rate which is standard NMEA 0183 v3.0 protocol offering industry standard data messages and a command set for easy interface to mapping software and embedded devices. This project consists of microcontroller, GPS modem, GSM and Security switch. Security switch connected to microcontroller with positive logic. This project fixed inside the vehicle. Press security switch after parking the vehicle. Then microcontroller locks the coordinates (latitude, longitude and altitude) of that particular place. If anybody move the vehicle from that place microcontroller can detect and sends SMS to the user or vehicle owner. After moving vehicle from fixed coordinates microcontroller sends coordinates to user continuously. With the help of this project we can easily find out the vehicle position through coordinates. In this project 7805 is a regulator and it avoids noise spikes in power supply. GPS modem is connected microcontroller through serial port. These GPS modem works under 9600 or 4800 baud rates.   Micro Controller : AT89S52 Crystal : 11.0592 MHz Lcd : HD44780 Led : 5mm Red LED Max232 Gps Modem Software Requirements Keil Proteus Uc Flash Embedded C X-ctu

We offer baby footprint identification system. Identification of new born baby’s is one of the main tasks of the medical team following birth. Especially in developing countries, where security in public maternity wards is not very tight, and overcrowding is common, the risks of a baby swap or kidnap are above acceptable. Reliable and fast methods for identification of new born baby’s were made available and used inside maternity and hospitals, as well as on airports or bus stations. New born baby’s fingerprints can’t be clearly captured, palm print recognition is not suitable for new born baby’s yet since it is often difficult to let a newborn open his hand. Although the dna examination is proven to be efficient in the univocal identification of individuals, but it comes at high cost and can’t be used in real time applications, demanding sophisticated laboratory procedures. Compared to other techniques, footprint recognition is very attractive for newborn personal authentication, since it is · a non invasive method · easy applicability · low cost · wide acceptance. advantages: · image acquisition is fast, so reduces time for capturing footprint image. · more reliable than other types of newborns footprints identification. · if high resolution scanner used to scan, greater resolution would yield better results. · fast and accurate identification.

Animal identification system meditech technologies india pvt. Ltd is the largest manufacturer and exporter of animal identification system. For identification of experimental animals. Ear punch: ear punching is commonly used for identification of small laboratory rodents and involves punching a hole in the middle of the ear. Mouse ear punch: punch of 2mm diameter and 5cm long, suitable for mouse with simple thumb type punching. Nail clipper style ear punch: punch of 2mm diameter with punching through nail clipper type mechanism. Ear tagging involves using a special applicator to place a metal tag with an identification number in the pinna of a mouse's ear. Because tags are relatively large and mouse ears develop quickly, ear tagging is suitable only for weanling and older mice.

The SPI-II is an instrument which enables remote identification of A-B-C electrical phases from all 50 and 60 Hz networks. Besides doing identification, the instrument enables verification of phase concordance and rotation in all safety and on any network points.

We are offering identity management system. We understand the importance of strengthening security without sacrificing operational efficiency. That’s why we developed the identity management system (idms)—a robust, highly flexible solution designed to be applicable in many critical settings. using biographical and biometric information, idms is ideal for airlines and airports—helping create fast-lanes for pre-registered passengers and invaluable checks on employees and crew members. idms also provides a comprehensive solution for government agencies responsible for border control, hazardous material management, and securing other high-risk facilities. for businesses, idms bolsters the security of their network resources—and serves as a secure area access manager managing user identities is a top priority for many businesses today. People need to access multiple systems and resources on the corporate network, using different types of devices. But because many of these systems don’t communicate with each other, it’s not uncommon to have multiple identities for the same person. As a result, managing these redundant identities becomes complex, wastes time, and increases security risks due to errors. effective identity and access management involves several interdependent technologies and processes such as directory services, identity life-cycle management, access management, and how applications should integrate with the infrastructure. These elements combine to maintain a unified view of identities in an organization and use them effectively. we can help you address identity-related security challenges and implement comprehensive identity and access management solution based on latest technologies.

Benefits: * Color TFT Screen with GUI interface for each. * Reads fingerprint and or PINS. * Built-in serial and Ethernet ports. * Multilanguage support.

FACE IDENTIFICATION WITH BIOMETRIC SYSTEM ACCESS CONTROL Features TI DM CPU 600MHz 1000 Face, 10000 Cards User Capacity 150,000 Records Capacity Specialized double sensor Tamper Security Alarm Built-in relay Access Control 4*4 Touch Keypad

  authentication to access identification of vehicles /materials/containers/drivers etc transfer / receive of transaction data .

Midi sherlock® mis is unique in that it can be used for fatty acid analysis (e.g. Soil plfas, edible& fish oils), soil microbial community analysis, mycobacterial identification, fire debris analysis, polyphasic analysis with sherlock dna (microbial id) and microbial identification with large environmental libraries of over 2,500 species of bacteria, yeast and fungi. • users can add species to the library. • identification to sub-species level. • low cost-per-analysis @ rs 28 only. • cdc-niosh clear • iqoq and 21cfr part 11 supports • identify non-microbial compounds • advanced strain tracking and analysis • more than 1000 peer reviewed publications including more than 300 for plfa and soil sciences.

NAC 2500 plus designed and produced using outstanding fingerprint recognition technology, NAC2500 plus fingerprint recognition Access control & Time Attendance  system is capable of speedy and accurate authentication of fingerprint data. With this product have we made it possible for you to build a more improved and efficient security system for a lower installation cost. In addition, this product offers you enterprise level entry management and employees' work hour management with its LAN communication-based network structure and enhanced server management program, Our online Time Attendance & Access Control Systems bring you powerful security features and simple, centralized administration tools, while maximizing your investment. Auto-on function Supports TCP/IP & RS485 Remote management and real-time monitoring capability by providing a server program Capable of high speed 1:N authentication Supports multi-security modes( assorted combination of fingerprint, password and RF card) Encrypts fingerprint data and network communications Allows, each user to access the premises only during their permitted hours

We are among the most TRUSTED Manufacturers and Suppliers of Caller ID EPABX System. Salient Features Caller ID on all ExtensionCaller ID on Transferred ExtensionCaller ID on PrinterInternal Caller IDUnanswered Call InformationOut Going Number on Transferred ExtonVoice Guided DISASMDR Printing (Buffer / Online)Computer ConnectivityDual Colour Indication for Trunks as well as ExtensionReal Time ClockFAX HomingRupee Value Billing16 KHZ Detection (Model 832 E onwards)Selective PrintingBuffer Full IndicationOperator CallCall Progress Visual Indication Optional Feature Smart SwitchPanic Alarm ConnectivityPanic Auto Voice DialerLeast cost routingAuto redial (99 times)External Calls ForwardingAbbreviated DialingCall restrictionExtension privacySelective Trunk Access Hotel Feature (824 & above models) Flexible NumberingSingle Digit Floor Service NoMorning Alarm Set by Room or though OperatorRoom to Room BarringCheck in / Check Out with Display onHotel Name Display on ConsoleHotel Name Display on SMDR Billing16 KHZ Detection for Models 832 onwards. Console / Key Phone 616 : 2 Key Phone port824-848 : 4 Key Phone Port864-1696 : 8 Key Phone PortDoor Phone & Door LockMonitoring of CO calls Special Features Auto Redial (99 Times)Boss Secretary SystemComputer ConnectivityCall BudgetingCaller ID Transferable on Extensions Even by Non CLI PhoneExternal Call ForwardingLeast Cost Routing

Identification systems are used for object identification. They can be used to automate manufacturing processes and to control the entire logistics of merchandising management through flexible networking. This reduces throughput times and makes variant manufacturing more flexible. Pepperl+Fuchs offers a comprehensive range of electromagnetic identification systems (RFID). Object identification is also possible using barcodes and data matrix codes.

Prime Technologies is distributor of X990 fingerprint identification system, Thumb impression machine, Face Recognation system in Mumbai, Pune, Nasik, Surat, Delhi, Chennai,Bangalore, Hyderabab, Ahmedabad, Kolkata.The attendance system is designed and integrated with the different types of payroll software, SAP and ERP.    

Features : Identification of the criminals, who left the palm latents at the scene of crime committing. Identification of the unidentified corpses, including the ones killed in the acts of terrorism, catastrophes or natural disasters. Identification of individuals being in the International Investigation. Identification of the incapable citizens. Identification of a concrete individual participation in the criminal actions on the international queries of Interpol, FBI, Ministry of Internal Affairs. Revealing of the homeless people’s connection to the crime committing.     TECH. SPECS. The Sonda AFIS is a patented software for PC of any type (functions in Windows XP/2000/2003/NT, Linux). Functions of AFIS "Sonda": Entering of tenprints from the paper carrier using a flatbed scanner or from the inkless fingerprint “live” scanner, Entering of the finger and palm latents captured from the scenes of crime, from the paper carriers and films with the help of a tablet scanner or directly from the latent carriers with the help of video input or from graphical files (bmp; jpg and others), Interactive encoding of fingerprints, palmprints and latents captured from the unsolved scenes of crime, Interactive recoding of tenprints and latents that are stored in database, Correction of the arrangement of the tenprints integral features, displayed after automatic classification (first processing), Storing of tenprints, latents and search results (recommended lists) in database, Visual comparison of two tenprints, of a latent with a tenprint, of two latents without preliminary launch of the latent search, Analysis of the searching results, Viewing of the recommended lists, Manual and automatic forming of a search query “Tenprint-Tenprint”, “Tenprint-Latent”, “Latent-Tenprint”, “Latent-Latent”, “Latent-Palm”, and “Palm-Latent”, Merging of two and more tenprints in one with the selection of the best fingerprints (manually or automatically), Design and printout of a phototable (latent-tenprint), Printout of the tenprint copies and latent cards using a printer, Import and export of tenprints and latents to transfer them to the different AFIS using electronic carriers, including international ANSI and NIST formats, Interchange of the dactyloscopic information, realization of searches and getting the results from the remote AFIS “Sonda” using e-mail or modem connection, Service functions, System administration, Statistic reports, Analysis of integrity and DB restoration. The AFIS “Sonda” is a system of the new generation, supporting databases from several tens or hundred of thousand tenprints on the regional level, up to millions on the government level. The high reliability and efficiency of AFIS Sonda with the DB of large size are provided with the use of the powerful servers and disc RAID-massifs, Oracle databases, operating system Windows for workstations and Unix servers and standard network protocols. High-powered personal computers are used as computers for the workstations. The AFIS “Sonda” has additional programs that are very comfortable for users: A testing program for the flatbed scanners used to ascertain the scanner compatibility with the AFIS and to evaluate scanning speed. Tenprints entering and arrangement of integrals operator training program. Latent encoding operator training program. Telepost is a registered supplier & has required certifications from the National Crime Records Bureau (Ministry of Home Affairs), New Delhi for Automated Finger Print Identification System.

ID card Printing Machine helps for creating identification cards or badges for your organization, school, college, business, etc. Dhonaadhi provides ID card Printing Machine in different models which help for making identify cards. It comes with software applications, web camera, cards, ribbon and cleaning supplies to print ID cards quickly.