Can be set by hydraulic setting tool / wireline set.
Bidirectional Slip.
Three element sealing system to provide superior pressure containment.
Built in differential pressure.
Equalizing system.
WR will not release unless equalizing sleeve has been shifted.
Ability to hang pressure recorders.
Can be set by hydraulic setting tool / wireline set.
Bidirectional Slip.
Three element sealing system to provide superior pressure containment.
Built in differential pressure.
Equalizing system.
WR will not release unless equalizing sleeve has been shifted.
Ability to hang pressure recorders.
These stinger subs are designed to positively lock the stinger sub into the retainer while allowing valve actuation with up and down motion. The Stinger Subs will not lock the retainer valve into the open position. Hydraulic effects must be considered to ensure the valve will remain open during pumping operations.
These stinger subs are designed to positively lock the stinger sub into the retainer while allowing valve actuation with up and down motion. The Stinger Subs will not lock the retainer valve into the open position. Hydraulic effects must be considered to ensure the valve will remain open during pumping operations.
Special zinc Phosphate and powder coating process to prevent from Rust and ensure stocking in the open for a long time.
Available in 4-1/2″ to 20 ” sizes. Any special sizes or combination can be made available on request.
Slip On Welded Semi-Rigid Centralizers share many of the same design and operational features as Hinged Welded Centralizers. They can be directly installed onto pipe and works best with set screw style stop collars to increase the holding force. The collars are innovatively designed with roll formed peripheral ridges that provide extra rigidity.
Special zinc Phosphate and powder coating process to prevent from Rust and ensure stocking in the open for a long time.
Available in 4-1/2″ to 20 ” sizes. Any special sizes or combination can be made available on request.
Slip On Welded Semi-Rigid Centralizers share many of the same design and operational features as Hinged Welded Centralizers. They can be directly installed onto pipe and works best with set screw style stop collars to increase the holding force. The collars are innovatively designed with roll formed peripheral ridges that provide extra rigidity.
Special zinc phosphate and powder coating process to prevent from rust and ensure stocking in the open for a long time.
These are shipped in half assembled condition for economical in freight and storage costs.
Supplied with hinge pin
Available in 4-1/2″ to 20 ” sizes. Any special sizes or combination can be made available on request
Special zinc phosphate and powder coating process to prevent from rust and ensure stocking in the open for a long time.
These are shipped in half assembled condition for economical in freight and storage costs.
Supplied with hinge pin
Available in 4-1/2″ to 20 ” sizes. Any special sizes or combination can be made available on request
Used in vertical, deviated and horizontal wells
Flexible and High restoring force
Developed to have good stand-off
Available in 4-1/2″ to 20 ” sizes. Any special sizes or combination can be made available on request.
Used in vertical, deviated and horizontal wells
Flexible and High restoring force
Developed to have good stand-off
Available in 4-1/2″ to 20 ” sizes. Any special sizes or combination can be made available on request.
Locked to cement retainer or bridge plug to avoid premature setting or loss.
Can quickly be configured to set cement retainers or bridge plugs.
Allows single run for squeeze cementing.
Locked to cement retainer or bridge plug to avoid premature setting or loss.
Can quickly be configured to set cement retainers or bridge plugs.
Allows single run for squeeze cementing.
FeatureDurable, Easy To Use, Good Quality, High Efficiency
ConditionNew
Country of OriginIndia
Available in the size range 4 ½” to 20”, this device can be set in both upset and Non-Upset casing to provide maximum clearance during rotation. It has a groove in the middle into which a spiral nail can be driven for improved grip on the casing. The broader band firmly grips the collar into position around the casing
Available in the size range 4 ½” to 20”, this device can be set in both upset and Non-Upset casing to provide maximum clearance during rotation. It has a groove in the middle into which a spiral nail can be driven for improved grip on the casing. The broader band firmly grips the collar into position around the casing
Number Of Flower : Hinged Bolted Stop Collar
Shape : Round
Certification : ISO
Application : Oil Drilling Industry, Oil Field
Feature : Durable, Easy To Use, Good Quality, High Efficiency
Available in 4-1/2″ to 20 ” sizes. Any special sizes or combination can be made available on request
Special zinc phosphate and powder coating process to prevent from rust and ensure stocking in the open for a long time.
These are shipped in half assembled condition for economical in freight and storage costs.
Supplied with hinge pin
Available in 4-1/2″ to 20 ” sizes. Any special sizes or combination can be made available on request
Special zinc phosphate and powder coating process to prevent from rust and ensure stocking in the open for a long time.
These are shipped in half assembled condition for economical in freight and storage costs.
Supplied with hinge pin
Available in 4-1/2″ to 20 ” sizes. Any special sizes or combination can be made available on request
Special zinc Phosphate and powder coating process to prevent from Rust and ensure stocking in the open for a long time.
Available in 4-1/2″ to 20 ” sizes. Any special sizes or combination can be made available on request
Special zinc Phosphate and powder coating process to prevent from Rust and ensure stocking in the open for a long time.
Sizes range from 4 1/2 ” to 20″. In addition to the regular sizes, any special sizes and combinations can be made available upon request.
Impero’s Hinged Non-Welded Semi Rigid Bow Spring Centralizer is engineered to meet API 10 D standards and specifications, allowing them to withstand all conditions.
This Centralizer is ideally suited for use in Deviated and Horizontal Wells where the load on the spring is maximum, as it has a high restoring force and high standoff with low running force.
Bow springs are made from high-quality alloy steel and heat-treated.
The spring characteristics of the Double-Crested profile make it easy to move through tight spots and doglegs.
As part of the manufacturing process, the centralizer is coated with iron phosphate to prevent corrosion.
This Centralizer is shipped in two halves to ensure a compact shipping package.
Sizes range from 4 1/2 ” to 20″. In addition to the regular sizes, any special sizes and combinations can be made available upon request.
Impero’s Hinged Non-Welded Semi Rigid Bow Spring Centralizer is engineered to meet API 10 D standards and specifications, allowing them to withstand all conditions.
This Centralizer is ideally suited for use in Deviated and Horizontal Wells where the load on the spring is maximum, as it has a high restoring force and high standoff with low running force.
Bow springs are made from high-quality alloy steel and heat-treated.
The spring characteristics of the Double-Crested profile make it easy to move through tight spots and doglegs.
As part of the manufacturing process, the centralizer is coated with iron phosphate to prevent corrosion.
This Centralizer is shipped in two halves to ensure a compact shipping package.
Can be made available in Left, Right and Straight Vane
Reduce friction between the casing and the hole, allowing the casing to be inserted more easily into the wellbore
Help centralize casing in the hole, allowing an even distribution of cement around the casing during cementing operations.
Improve cement bonding to the casing
Prevent the casing string from becoming differentially stuck
Break up gel pockets in the wellbore while casing is being run, improving
drilling-fluid displacement during cementing
Increase fluid turbulence removing filter cake on the wellbore face
Can be made available in Left, Right and Straight Vane
Reduce friction between the casing and the hole, allowing the casing to be inserted more easily into the wellbore
Help centralize casing in the hole, allowing an even distribution of cement around the casing during cementing operations.
Improve cement bonding to the casing
Prevent the casing string from becoming differentially stuck
Break up gel pockets in the wellbore while casing is being run, improving
drilling-fluid displacement during cementing
Increase fluid turbulence removing filter cake on the wellbore face
Fast Drill Out.
Non-Rotating Profile Available
Available in Side-Jet, Down-Jet, Up-Jet Port
Stab In profile available in large size
Internal Parts are PDC drillable.
Float Shoe is available in all API grade material.
Float shoe can be furnished in API threads as well as in Premium threads.
Jet Port/Nose configuration is available upon request, Impero offers Side Jet Ports, Down Jet Ports and Up Jet Ports.
Valve is tested as per API RP 10F Category III C. Float Shoe is available in Single and Double valve Configuration.Maximum Back Pressure rating: 5000 psi @400°F.
Tubing Float Shoe for high pressure up to 10000 PSI.Float Shoe is available in different type of nose as per the application.
Chip breaker features are in all type of aluminum nose as well as Phenolic nose.
Fast Drill Out.
Non-Rotating Profile Available
Available in Side-Jet, Down-Jet, Up-Jet Port
Stab In profile available in large size
Internal Parts are PDC drillable.
Float Shoe is available in all API grade material.
Float shoe can be furnished in API threads as well as in Premium threads.
Jet Port/Nose configuration is available upon request, Impero offers Side Jet Ports, Down Jet Ports and Up Jet Ports.
Valve is tested as per API RP 10F Category III C. Float Shoe is available in Single and Double valve Configuration.Maximum Back Pressure rating: 5000 psi @400°F.
Tubing Float Shoe for high pressure up to 10000 PSI.Float Shoe is available in different type of nose as per the application.
Chip breaker features are in all type of aluminum nose as well as Phenolic nose.
FeatureGood Quality, High Pressure Bearing Capacity, Temperature Resistance
ConditionNew
Country of OriginIndia
CONVENTIONAL TOP & BOTTOM PLUG
Plugs are available in Nitrile, Viton, Aflas and other elastomers.
Plugs are available in conventional and Non-Rotating Design. Plugs are PDC drillable
Maximum temperature rating 400°F
Non-Rotating profile reduces the drilling time
Oil Resistant
CONVENTIONAL TOP & BOTTOM PLUG
Plugs are available in Nitrile, Viton, Aflas and other elastomers.
Plugs are available in conventional and Non-Rotating Design. Plugs are PDC drillable
Maximum temperature rating 400°F
Non-Rotating profile reduces the drilling time
Oil Resistant
Number Of Flower : Cementing Plugs
Shape : Cylindrical Round
Application : Oil Drilling
Feature : Good Quality, High Pressure Bearing Capacity, Temperature Resistance
Secondary Business TypeExporters / Wholesale Suppliers
Year of Establishment2021
No. of Employees21 - 50
Annual TurnoverRs. 0.5 to 2.5 Crore Approx.
Ownership TypeOthers
GSTIN Number06AAFCI8670J1Z6
Opening Hours
SUN : Closed
MON : 9:30 AM - 6:30 PM
TUE : 9:30 AM - 6:30 PM
WED : 9:30 AM - 6:30 PM
THU : 9:30 AM - 6:30 PM
FRI : 9:30 AM - 6:30 PM
SAT : 9:30 AM - 6:30 PM
Impero Petro Tools is engaged in the design and manufacturing of a wide array of Equipments such as Casing Centralizers, Cement Basket, Stop collars, Float shoes, Float Collars, Reamer shoes, Cement plugs, Bridge plugs, Cement retainers, Packers, Stage Tools, and other accessories for Cementing and Completion applications. Impero Petro Tools has its manufacturing unit in a major engineering hub near NCR in Faridabad, India.
Reviews & Ratings
Write a Review
Post Free Ad