Indotherm Equipment Corporation Mathura Road, Faridabad, Haryana

Condition : New

Country of Origin : As Per Model

Number Of Flower : Bogie Hearth Furnace

Certification : ISO9001 2008

Application : Heat Treatment Furnace

Country of Origin : Haryana,India

We are offering universal tilting rotary furnace, tilting type rotary furnace is a unique combination of rotary furnace and hydraulic tilting furnace. This design of furnace is capable of maintaining in short cycle of time and the dry flux melting process. Meanwhile traditional rotary furnace have been static over the recent ages however implementation of tilting technology has proven a great leap in the overall furnace melting process. With the use of tilting rotary furnace user can avail the following benefits to which was not available in the traditional rotary furnace. Faster production| less heat loss| no salt required when using oxy fuel technology| melt dross | melt mixed scrap often with contamination (tense, taint, tabor etc) | melt turnings swarf chips | melt ubc indotherm equipment corporation manufactures a wide range of sizes from 3 to 14 mâ³ (6 to 27 tons) and melting rates from 1.5 to 6 tonshr is available. Advantages of our universal tilting rotary furnaces: â�¢ choice of fuels to suit local conditions, oil, gas, if available, with or without oxygen (oxy-fuel). Â�¢ double pass burner firing system to gauge and mix the precise ratio of fuel (carbon) to oxidant (air or oxygen). Â�¢ burner is fitted with opening enabling the furnace to tilt and fire in chorus. This gives improved mixing of the material, faster melting and higher metal recovery. Â�¢ variable melting angles. The tilt rotary door design enables the furnace body to be reclined to maximize load capacity. Also known as: rotary tilting melting furnace| tilt rotary furnace| universal rotary tilting furnace| hybrid tilting rotary furnace| aluminium dross and scrap melting tilting rotary furnace| utrf| convertor furnace| mixed scrap and drosses melting furnace

Universal melting tilting furnace are helpful in delivering increased productivity with outstanding energy saving capacities. These are used for die-casting applications for bulk melting process. Oxidized materials including low and high metal energy scrap, feedstock and dross have been melted in tilting rotary furnace.  When the performance is compared with other tilting rotary furnace range then there are certain benefits including low energy usage that results is 15 parent saving. High level of metal recovery with 2-5% of increase in recovery. Increased level of productivity that is about 50 times is gained. Labor savings are also achieved because it is an automated process and only one operator is needed to operate different furnaces at a time. Savings of cost and time along with efficiency is gained with the help of innovative design that is backed-up by latest knowledge and in-depth research. Fuel choice is made in accordance with local conditions. Oil, gas or oxy fuel is employed when needed. Proportionate combustion system is used for double pass burner firing to mix precise amount of fuel with the oxygen. Accurate real time ratio of this proportionater helps in gaining maximum level of fuel efficiency results. Process control is also gained. For instance, smoke during start of a charge or with fire with reducing atmospheric effects for saving metal oxidation. There is also a unique door management system that helps in titling and firing at the same time. This aids in getting a good mixing of charge. Faster and high melting recovery is achieved with this process. All types of scrap including bulky and oversized material can be charged at a faster rate. Door openings are present at a diameter of 79 degree. Charging machine that is fully integrated allowed fast charge and improved melting. Less energy usage with more production is assured.

We offer a flexible and universal design of tilting rotary furnace that is the best solution for aluminum scrap recycling. All the scarp that is formed can be easily recycled to gain better results. A friction drive wheel system is maintained to rotate the furnace. Along with this a single door is also employed with either horizontal or vertical rotation that has a pendulum type switch. It involves a high efficiency system that is fixed on the furnace with tiles. It exhausts with a fume collection housing or with a rotatory joint. Traditionally these furnaces have been static in nature but now tilting deign have been added that has helped in bringing improvement in their efficiency. Now work is done in lesser time. Cost of process is low and yield is also high. Engineered rotary furnaces are used to fit the needs and demands of all clients with different requirements. The air burner is provided with fuel oil or with gas. In any case configuration can be changed for static or tilting design. The objective of our company is to design a system with high performance, coherent production tools that can help process a wide range of commercial scarp with the help of salt free technique. Latest melting practices that are present in the market are employed. These latest systems has also helped in elimination of the need of flux melting procedure. Working conditions for furnace men have improved to a great extent. It has also helped in melting a wide range of feedstock. Elimination of metal pollution has achieved as well. It has also facilitated homogeneity and charge mixing.  The chances of self-cleaning are also high with high thermal yield and low range of energy consumption. Finally faster and efficient system is achieved that has 2-3 times higher yield than that of traditional furnaces.

We are offering tilting melting furnace, indotherm equipment corporation tilting furnaces are used in many areas of foundry. The tilting furnace is ideal for melting or keeping warm. The tilting furnace can be used manually or as part of an automated system. Indothermâ��s tilting furnaces are particularly suitable for melting and casting of light, non-ferrous and heavy metals. The tilting furnace can reach a maximum temperature of 1400 â°c (electrically or gas-fired). We are one of the leading exporter and manufacturer of crucible tilting furnace, tempering furnace crucible tilting furnace, furnaces, industrial furnaces, melting furnaces, industrial electric furnaces, and crucible in india these furnaces are also know as gas fired regenerative crucible tilting furnace, fuel fired basin tilting furnace, holding non crucible furnace for aluminum, furnace, dual energy bale out & basin tilting furnace transportable crucible furnaces, fuel-fired tilting melting furnaces, dewaxing furnaces, furnaces, heat treatment furnace, furnace, transportable crucible furnaces, furnaces.

We are offering steel rolling mill furnace, Pusher furnaces that has an innovative and robust design. It allows low cost of treatment and high efficiency of operation. This is a heavy duty furnace that has no frills. It is for billet reheating. Our smart pusher furnace has allowed achievement of good results in low production rate mills and has remained the top priority in the market. It can process common grade steel such as rebar. The design that our company is offering is highly adaptable in nature. It can be customized according to the needs of the client. The pusher hearth we offer gives additional benefit off its sturdy construction. The overall design is simple and easy to use. High level of productivity is assured in industry with very low consumption of energy. It is a simple product for companies that are looking for easy to use, sturdy steel rolling mull furnace that is inexpensive as well. This design is the best alternative to high cost sophisticated form of waking hearth beam types present in the market.

Shaker Hearth Heat Treatment Furnace in fact called Reciprocating and Rotary Agitation write Furnaces while responding shaker movement bestows idleness to the work plate display in the hearth of the heater with uniform warming to the principle workload general case profundity warm is accomplished. The Furnace are by and large utilized for the light weight parts that are to be carburized to case profundity of 0.3 mm. Shaker hearth heaters utilize a plate for the vehicle of Work pieces from a bay zone to a release zone, and such plate are ordinarily upheld inside the heater upon metal or headstrong slides or upon rollers or notwithstanding holding tight arms. Such kinds of backings are liable to very fast Wear and their restoration requires expulsion from the Furnace. Primary Process of the Furnace: Austempering : increment quality, sturdiness, and diminish mutilation. Solidifying: increment the hardness of a metal for better protection. Remarkable Features: Pleasantly Welded and Painted Mild Steel Structure with appropriately strengthened with reasonable size of edge and channel. Shaking Tray is made out of Stainless Steel 310 review which can manage top of the line operational stun. Heater is given the programmed control board for the operation. Steady temperature in heater because of subdivision of heater in to warming drenching zones. Segment Processed: High Carbon clasp. Hand devices, spanners, bearing, chain, locks, vehicle parts and so on. Solidifying of little utensils parts. Austempering of auto-segments. Solidifying of protection Alloys. Extra Information: Thing Code: HTF-7 Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer) Port of Dispatch: Nhava Sheva, Kandla Port Generation Capacity: 4-8 every year Conveyance Time: 30 days Bundling Details: High Quality Plastic Wrap Wooden Box with Fumigation

MECHANISM:   Consists of dial indicator and special geometry plunger to read hardness of Green Mould from 0 to 100 Nos.   Sand Type: Green Sand   Test: Determines hardness of mould   Application: To find out the Green mould hardness of the sand mould prepared by any method e.g: Hand molding, Jolt Squeeze molding etc.

Height : 165

The Sand Dryer, which we offer, is manufactured in compliance with the set industrial standards. These Sand Driers are acclaimed for their innovating design, low energy consumption and ease-of-use. We are ranked among the reliable Manufacturers, Suppliers and Exporters of the Sand Dryer. Appreciated For Long lifeHigh resistance against corrosionLow maintenance costUser-friendliness

Type Of Furnace : Fix

Power Source : Gas

Condition : New

Total Carbohydrate : 1 Year

Availability : 10 TONS

Reverbratoy furnace for scrap melting are used for procedures such as scrap recycling and alloying units. In these case full burners are used. Melting is done after the charging of the scrap in the furnace. Processing of prepared metal for its alloy correction can also be done in such cases. Transportation is done in order to end the application. Reverbratoy furnace for scrap melting are usually batch type furnace can their application can be wide. Several types of scrap can be processed in these Reverbratoy furnace for scrap melting. Fuel continuous of the furnace is around 1000KWH/ton when temperature is 7200C. Metal loss of approximately 4 percent happens in this case. Mutual operations have to be carried too and metal tapping is done with the help of hydraulic tilting system or plug system. Reverberatory furnace for scrap melting can be customized according to the needs of the client in different ways to achieve: Holding of metal or melting in one single chamber Refractory also would not have any blind corners so it would be easier to clean the furnace properly after its usage A plug or hydraulic tilting system can be employed for the sake of metal tapping Air recuperator can be employed to equip the furnace A full access can be given with eth help of a large door so cleaning and loading can be done properly

Brand Name : INDOTHERM

After-Sales Service Provided : Overseas service center available

Country of Origin : Delhi,India

Country of Origin : Made in India

We are the main supplier of this product.

Number Of Flower : Material Handling Equipment

Country of Origin : 415

Total Carbohydrate : 12 Months

Certification : ISO 9001-2008

Condition : New

Availability : Approx 1 Ton

Used for lead & zinc melting, reprocessing aluminum scrap, the Rotary Melting Furnace, which we offer, is manufactured in accordance to the set industrial norms. These Rotary Melting Furnaces are rotated by a positive rack/ pinion, or a friction drive wheel system or chain drive depending upon the application. A single door is utilized with horizontal, vertical or a pendulum like swing arrangement, depending on plant layout. Features Energy Efficient Saving of fuel upto 20%Economical High EfficiencyVery competitive prices with best equipments Types Of Scrap Melted With The Rotary Melting Furnaces Are : Painted and anodized extrusions sectionsThermal breakUBCLithooily rolling mill scrapfragmentized scrapWhite drossBlack drossEngine blocks

Total Carbohydrate : One Year

Brand Name : Indotherm EquipmentCorporation

Availability : 100KG

Number Of Flower : Induction Furnace

Country of Origin : As Per

Certification : ISO9001 2008

Condition : New

Country of Origin : Haryana,India

We are offering mechanical tilting reverberatory furnace, mechanical tilting reverberatory furnace indotherm equipment corporation is one of the leading supplier, manufacturer and exporter of reverberatory furnaces. We design reverberatory furnace that isolates the material being processed from contact with the fuel, but not from contact with combustion gases. Aluminium melting: today, reverberatory furnaces are widely used to melt secondary aluminium scrap for eventual use by die-casting industries. Used in various fields of application such as batch type melting process, metal inserts casting melting process and stand by furnace operations the simplest reverberatory furnace is unique tool for the smelters and various foundry areas a furnace flawlessly lined with alumina refractory brick with a flue at one end and a vertically lifting door at the other. Straight oil or gas burners are placed usually on either side of the furnace to heat the brick and the eventual bath of molten metal is then poured into a casting machine to produce ingots. General performance specs � fuel consumption 95 to 110 literston at 720deg � metal loss 6 % to 8 % � capacity 300kghr to 4 tonhr � loading manual � fuel dofohsdlpgpropane also known as: reverberatory furnace| gas fired furnace| oil fired furnace| sklenner furnaces| high temperature furnace| bulk scrap melting furnace | mini melter| hydraulic tilting furnace

Country of Origin : 415

Total Carbohydrate : 12 MOnths

Application : Melting Furnace

Availability : 10 TONS

Condition : New

Country of Origin : Haryana,India

Litharge fabricating is a bunch procedure. The Furnace is pre-warmed to 575-600°C by a gas/oil terminated burner. Lead Oxide is metered and sustained into the heater. The material is blended and fomented inside the heater. The temperature is kept up between 575-600 °C all through the response. The response is exothermic, thus less fuel is utilized to keep up the temperature.  

Lead reused from utilized lead corrosive batteries or different sources (Secondary Smelting) by means of the Mini Blast Furnace or Rotary Furnace course, contains parcel of pollution and undesired segments. Then again, Lead required for battery fabricating is either delicate Lead with 99.97% virtue or hard Lead of changing Antimony creations.  

Country of Origin : Made in India

Country of Origin : 380 V

Availability : 40 MT