Transmission Seal Dealers in Gandhinagar

• Size (Inches): 2 - 6 \"
• Material: Steel
• No of Holes: 4

diaphragm seal, DP2 Differential Pressure Gauges, Gauge Saver

• Application: Other
• Pattern: Plain,Other
• Color: Blue,Golden,Green,Red,Silver,Other
• Feature: Fine Finishing,Good Quality,Leak Proof,Other
• Shape: Round
• Type: Flip Off Seals
• Material: Aluminium,Plastic

We supply quality products

We are offering seal caps. Product descreption : we have achieved a distinct position in the market by providing pharma seal cap bottles. Our molding container is firmly inspect in terms of quality for maintain their adherence to internationally set norms. The offered molding container has achieved an exceptional value in the market for its quality. This molding container is accessible in modified designing options in order to fulfill the needs of our customers spanning across the country. These bottles are widely used in varied chemical and other industries to store or pack chemicals. This range is widely acknowledged for their features like highly durability, strength, heat tolerance and low maintenance costs. Our clients can avail this range of the products in varied sizes, shapes and dimensions as per their requirements from us at very reasonable prices. Features: crack resistance accurate designs durability filling capacity : 100 ml

• Size: 0-25mm, 25-50mm
• Type: Sealing Wads
• Material: Aluminium, Foam, Rubber
• Shape: Round
• Thickness: 0-10Micron, 10-20Micron
• Color: Natural-white, Off-white, White
• Pattern: Plain, Printed
• Feature: Easy To Seal, Excellent Quality, Highly Durable, Long Lasting Life, Preserves Freshness, Smooth Finish
• Cap Type: Rubber Stopper

We are providing Aluminium Seal Top in Golden and Silver metal. We have been able to supply, export and manufacture a popular range of Spout Cap with Aluminium Seal Top. Spout Cap with Aluminium Top array is extensively applauded among the valued users. As per the demands of the arena, we manufacture it with information such as company’s logo, name, brand, etc. For this purpose, we use quality virgin food grade polymers,metals, master batches and colors. These spout caps are 100% tamper proof so that filled product quality remain same till it reaches to the customers. Can also be offered with embossed finish done on side or top. Allowing printing to be done with multiple colour options. Features: Sturdy constructionLow maintenanceCorrosion resistance100% tamper proof

• Pin Length: 72.7 mm
• Bolt Length:: 72mm
• Bolt Diamater:: 7.6mm
• Operating Length:: 42mm
• Bush Length:: 33mm
• Material:: PP/ABS
• Packing:: 100 Pcs/Carton
• Weight:: 4.8 Kg/Carton

This Bolt seal is a high security bolt seal specifically designed to Secure high value Containers & cargo. The seal features a carbon steel body and ABS plastic coating for tamper evident visibility. To increase security, the body and bolt is laser etched with matching numbers. All the specifications can be modified or we can customise products as per customers requirements.

All seals are made from a superior rubber compound that has been time tested and approved by the Engineers. Every batch of mixed rubber undergoes rigorous testing at factory laboratory as well as at NABL approved government laboratory to ensure all of the physical and chemical requirements before being released to final stage.An extruded rubber product differs from a molded rubber product in that the uncured rubber is forced through a die of the desired cross-section under pressure from an extruder. The extruded product is then vulcanized or cured, in a heated pressure vessel known as an autoclave. Extruded parts can be made in sizes ranging from 6" in diameter to a rectangular cross-section of up to 4" by 8" and in continuous lengths of up to 60 feet.

Made from 100% Food Grade certified raw material- Available in Foil + Poly or Pet + Poly Laminates, Our Poly is Universal and can be used for sealing to variety of substrates like PS, PP, PET, APET, CPET, PVC etc.

• Thickness: 10 Micron To 200 Micron
• Feature: Temperature resistance, High tearing strength
• Pattern: Plain

Hi -Tech Grout seals prevent mud contamination thereby ensure a clean jacket leg annulus. Hi-Tech can manufacture HGS as per client requirements. Unless until specified, we use ASTM A36 steel in our HGS.    Hi -Tech Grout Packer is made of reinforced rubber HGP ensures successful sealing and proper grout setting between the offshore jacket leg and pile facility.

• Brand Name: Mass
• Size: 1 /2 to 3"Flange (ANSI), DN40 to DN80 (DIN)
• Pressure Rating: 150 to 2500 lbs, PN10 to PN160
• Wetted Material: SS316L, SS316L with teflon coating, Hastelloy C

The Molecular Seal AFS Series is located just below the flare tip and has been designed to prevent air ingress to the flare riser thus preventing the formation of an explosive mixture in the system. The seal is a gas inversion device causing the gas normally flowing in an upward direction to be turned through 180 degree in the original direction of the flow. In a static condition, gases lighter then air will tend to collect in the upper bend sealing off the stack against the back flow of air. Heavier gases will tend to settle in the lower bend with the same effect. Some wind and atmospheric action will affect these interfaces slightly, and molecular diffusion of the two gases will take place at the interface. In order to counteract these effects a small continuous bleed of gas, dependant on the flare nominal diameter, must be maintained in order to ensure that air does not penetrate the seal. ADVANTAGES Molecular Seals have a safety factor for momentary loss of purge gas Lower purge gas rates Cost saving on purge gas No maintenance required Robust construction Molecular Seals can be used as a support for a flare tip lifting davit DESIGN CHARACTERISTICS Flare stacks are designed to dispose of flammable gases safely by ensuring the combustion of these gases at the exit of the stack (flare tip). It is undesirable to have a flarestack filled with a mixture of gas and air (oxygen) within the flammable limits because of the dangers of internal flash-back or explosion. Normally when a stack is in a shut down condition, unless special arrangements are made, the safest course is to assume that it is full of air. Subsequent introduction of a combustible gas means that at some stage, as the gas displaces the air, a flammable mixture will result. In order to prevent a dangerous situation arising, it is possible either to ensure that no ignition source is present during this period, or to replace the air with gas rapidly to preclude the danger of flame regression into the mixture. The most common and most acceptable safety measure is to purge the system with a non-flammable gas prior to introducing the combustible gas, thus injecting a barrier between the two active agents. If the period between starting the purge and introducing flammable gas is to be prolonged a reasonable course of action is to include in the system a device which assists in keeping air from the stack, whilst reducing the amount of purge gas needed to accomplish this. The use of such a device is also advantageous when it is necessary to keep a flare on stand-by but not operating for a long period, when saving in purge gas will pay for the capital outlay on the device.

Being trust-worthy manufacturer and supplier of the Lidding Foil. The offered foil is utilized as a top on plastic mugs and compartments which gives consummate conclusion to the container as well as makes it appropriate evidence and gives assurance from outer impacts. This low penetration properties of the foil to water vapor and oxygen guarantees the required time span of usability. Provided warmth seal finish utilized as a part of Lidding foil can be made seal-able to various containerbump substrates, for example, PET, PP, PS, HDPE and PVC. Lidding foil with a widespread covering which can seal with numerous substrates is additionally accessible.

Drum Cap Seal, Bottle Caps, Tamper Evident Seal, Bubble top Caps

We are offering epe liners.

Flip Off Seals, Tear Off Seals, Pilfer Proof Caps, Industrial Gaskets

Rotary Shaft Seals - Cinch Seal, Air And Hydraulic Oil Rotary Union

Single Pusher Seal, Multi Spring Pusher Seal, Conical Spring Seal

Lidding Foil, blister foils, strip pack foil, laminated paper sheet

diaphragm seal, Electronic Pressure, RTD, Test and Master Gauge

induction wads, Bottle Wads, frozen food packaging, Biscuits Wrappers

oil seals

PU V Seal Hydraulic Seal, Industrial Gaskets, precision extruded rubber cords

Aluminium Vial Seal, Aluminium Pharma Foil, Blister Foil