T Strainer Dealers

We are one of the finest ‘y/t’ strainers manufacturers in india. ‘y/t’ strainers take their name from their configuration. They are most commonly used in pressurized lines, gas or liquid, but can also be used in suction or vacuum conditions. They are intended for applications where small amounts of solid particulate are expected, and where clean-out will be infrequent. If solids will flush easily from the screen, and fluid can be exhausted to atmosphere, a blow-down valve on the drain port will allow clean-out without removal of the screen, and without interrupting the process flow. Applications: ø pump protection, ø flow meter protection, ø valve and regulator protection, ø protection of heat exchanger and refrigerating set, ø protection of steam traps, ø instrumentation and ancillary piping item protection etc. technical specifications: material of construction: housing: carbon steel, stainless steel in various grades, - other materials and coatings available on request. filter element: carbon steel, stainless steel in various grades - other materials available on request. end connection: flanged (as per requested table.), threaded (npt or bsp) sizes: sizes are available from 1/2" line size to 24" line size. Other/higher sizes available on request filtration rating: filtration rating available from 1 micron to 1000 microns pressure rating: up to 1000 psi. High-pressure ratings available on request.

T strainer some special filter elements which are designed to remove moisture and oil from air.are designed to remove moisture & oil from compressed air.

Many industrial Water treatment plants & desalination plants handle water having extremely high TDS. This demands for exotic quality of SS like Super duplex as an MOC for the filter housings. We have indigenously developed and are successfully supplying micron cartridge filter housings made out of PP + FRP which offers extremely good corrosion resistance at 14th cost of duplex steel materials. All housings are custom made to accommodate different number cartridges as per site conditions.

Acme Fluid Systems is one of the top contributors for Flanged end T type strainers in India. These types of strainers are usually required for diversification from a single source.

T Type Strainer, which we make available, has earned clients’ appreciation owing to its exceptional capacity to withstand corrosion. Having high strength and accurate dimensions, these T Type Strainers perform hassle-free operations. We are a dependable Exporter and Supplier of T Type Strainer from New Delhi. M.O.C. Housing Casted : C.I.C.S.S.S.G.M.Fabricated : M.S.S.SP.P. Fiberothers on requestElement : SS 304SS, 316Brass, Paper, Sintered. Applications PumpsEnginesFlow meterBoilersTurbineRO Plants Size Range Casted : NB ½ “ to 1 ½” Screwed, BW, SWNB ½” to 8” FlangedFabricated : NB ½” to 4” ScrewedNB 1” to 60” Flanged

Buyers across the nation can contact us for getting y & t strainers in retail or wholesale at competitive prices. In order to ensure efficient handling of the payment procedure, we have developed our own model that helps us a lot in making safe and secure transactions.

Our t type pipe strainers are ideally used to remove physical impurities from liquids, steam, gases, etc. Specially produced in forged, cast and fabricated construction, the t type pipe strainers supplied by us possesses high performance and superior quality. Available with screw and flanged construction, the t type pipe strainer that we export are used for inline applications. Furthermore, the clients can obtain our quality-tested t type pipe strainers in various specifications as per their requirements. t type pipe strainer are appreciated for excellent qualitybetter designingreliabilitydurability

We are offering t type strainer. Technical specifications : design : bucket / pot / ’t’ type (casting & fabricted)body material : cast iron, carbon steel (astm a 216 gr. Wcb, forged carbon steel (astm a 105), cf8 (ss 304), cf8m (ss 316), cf3m (ss 316l), ss 202, alloy steel & others.end connection : flanged endpressure rating class : asa 150, 300.size range : 25mm to 400mm.

Jameel Trading Company ia one of the authorized dealer of T Type Strainer in Chennai. Its popular among clients because of its long lasting life Performance and coustomers trust on our products. Rating PN 10 Manufacturing Std: HAWA/014 End Connection: Flanged Ends to BS 10 Table-`E’ Inspection and Testing Std: BS 6755(Part-1)

Our Y-T & Conical Strainers are specifically designed for high performance and long service life even with regular usage under conditions of high pressure and temperature. Our strainers are easy to install and most suitable for different industrial applications. It provides flawless performance with best adaptability. We design and manufacture Y-T & Conical Strainers using different material based on specific requirement of customers. We provide ideal suggestion to our customers to select the most suitable type of strainer and mesh type that perfectly meet their application needs. Flair Y-T & Conical Strainers – Cost-effective, Easy To Maintain, Compact Design: Y-T & & Conical Strainers are used in many industrial applications to protect plant machinery to damage from contaminants such as dust, scales, sand, solid particles and other possibilities. It is used to remove solids from flowing gases or fluids using straining element.It is called Y-T & Conical Strainer due to its shape and used for coarse filtration. Y type strainers are used where % of solid less in quantity. In this type of strainer, the capacity for holding the dirt or foreign particles are less in comparison with basket strainer. It can be used horizontally or vertically. Low pressure drop, compact size, robust design and ease of maintenance are some special features of these type strainers. Material & Construction: Housing of the Y-T & conical Strainers are available in Cast as well as fabricated construction. Most common steel section used for fabrication is Pipe, Plates, Forging, and Equal Tee of various Material Grades suitable for the Process fluids and available with Flanged, Screwed, and Socket Weld type end connections. Stainless Perforated sheet, wires, rods, and wire mesh of various specifications are used to fabricate the Filter elements.  In Tee type strainer, many times a structural skeleton made of flats and round bar is used to support the wire mesh. Flair Y-T Conical Strainers – Salient Features Compact Size and Low weight Low pressure drop across the filter Adequate strength of element and housing Permits rapid servicing i.e. ease of cleaning or replacing the element Low cost – Initial as well as service cost Components are suitable and compatible with fluid concerned. Allow to interchange same type of component with another Ideal for liquid, steam or gas No contamination between filtered and unfiltered liquids Installed in either vertical or horizontal position Flair Y-T & Conical Strainers – Applications It is useful in protecting the condensate and steam systems from the possibilities of damage by the influx of the debris habitual of finding way into the pipeline system. Strainers protect the equipment by holding the flow of such solids. In this way, it reduces downtime and servicing cost.These strainers have a wide range of application to remove solids from liquids at pumps suction and delivery side piping. Strainers installed on suction side of pumps & named as suction strainers also. Power Industry Fertilizer Industry Pharmaceutical Industry Chemical Industry Process Industries and many others Our products are known for its features like durability, reliability and high performance. Our products are available at the most competitive price with the utmost quality. To know more about our Y-T Conical Strainers or for your custom inquiry, write us at info@flairfilter.com.

We are sole design, manufacture and supplier of Tee Type Strainers, Steel Tee Strainers, and Vertical Tee Strainers. These are manufactured from one piece. 'T' or fabricated Tee with bath tub type element is suitable for horizontal flowing medium or 90 flowing medium. Design of the element may be of Bath Tub Type, Conical Type or Partition Type depending on flow direction. 'T' strainers are recommended where there are limitations of space to accommodate Basket Type strainer. 'T' Type strainers with Butt Weld ends can be directly welded to piping.Our Strainers are highly compact and applicable, where space is restricted. Unlike most other Strainers, Tee Type Strainers are ideal to use in either vertical or horizontal installations. There are some different arrangement are available for the Cover as per the below. Hinged Cover Type (For Quick Opening) Bolted Cover Type (For high Pressure) Application: Filtration of liquids, Lube & fuel oil, Chemicals etc. Construction: Cast Iron, Cast Steel, Stainless Steel and Fabricated Construction. Connections: Flanged, Screwed, S.W Ends. Flanges in DIN, ASA Range: Pressure: 150#, 300#, 600# Sizes: NB 50 NB and upwards. Element/Screen : Stainless Steel, Brass, Monel. From coarse say 8 mm to as fine as 0.5 micron. ‘Features: Easily removable fitted without fasteners to seat. Easily removable cover with hinged bolt design or fixed type cover. High Filtration Ratio. Streamline design for low pressure drop.

Our T Type Strainer offers several advantages over other strainer designs. The strainer is very compact, important in applications where space is restricted. Unlike most other strainers our T Type Strainer can be used in both vertical or horizontal installations and T Type Strainer screen can be cleaned without draining the strainer housing.