Tilting Table Dealers

We offer tilting tables. tilting table is a useful accessory for setting work at an angle for milling or other operations. The table has machined t-slots along length and can swing up to 45° on either side. For setting purposes a degree scale, reading minimum one degree, is graduated on the end face of cylindrical base itself. This ensures better setting accuracy. The table is set manually to the required tilt and is locked in the set position by means of two locking clamps held through bolts.

Tilting Table - Overview Tilting Table is a useful accessory for setting work at an angle for milling or other operations. The table has machined T-slots along length and can swing up to 45° on either side.For setting purposes a degree scale, reading minimum one degree, is graduated on the end face of cylindrical base itself. This ensures better setting accuracy. The table is set manually to the required tilt and is locked in the set position by means of two locking clamps held through bolts. Salient Features Made from close grained plain cast iron conforming to grade FG 220 of IS 210 (equivalent to GG20 / FT20 / 30-A). Higher grades also offered on request. Castings stress relieved to relieve internal stresses. Table top and base are flat and parallel within 0.05 mm per 300 mm. T-slots are parallel to the edge of the table and the cylindrical base within 0.05 mm per 300 mm. Offered in sizes as shown in the table.

Vikrant manufacturers core assembly platform for assembly of 35 limbed core for distribution & power transformers with bottom and top yoke. Centre distance and length of the limbs are adjustable as per customers requirement. The assembly can be done without the top yoke also as per user's practice. The core table is made vertical by means of 24 hydraulic cylinders on capacity of the platform.

Hi Low Tilt table with Remote Control,Adjustable activity tray,Adjustable Foot rest,Tilt Angle Indicator,3 Support Belts,Large Locking Castor . Height Adjustable to Wheel Chair height. Additional Information: Pay Mode Terms: LC (Letter of Credit),Other

HMS Offers High Low tilting table which has two motors one each for Tilting and Height adjustment. We use lightweight but strong and durable construction for easy mobility. We have provided a wired remote control for adjusting the height and tilt. As a optional feature we can provide emergency battery backup in case of power failure. Features   Elevated frames to allow proper lifter positioning Heavy duty motor lift up to 250 Kgs Powder coated frames that rusting and scratching Remote control for up-down adjustments Angle indicator Three extra wide movable patient positioning straps with locking swivel casters Removable footrest Safe working load with lifting and tilting capacity of 250 kgs Electric height and tilting operation with hand switch control Adjustable angle dual footboards – positive and negative (+15 to -30) Worktable supplied with standard model – optional with Economy model Supplied with patient handgrips and set of harnesses Height range 47cm to 101cm (18 – 39”) Tilt angle from horizontal to 90 degrees vertical Lowers to wheelchair height for ease of patient transfer Tilt angle inclinometer fitted as standard Purpose made precision bearings on all pivot points Clearance beneath frame for mobile hoist

  Tilt Table Xiangyu medical XYQ-5   Adjust the height of bed automaticallyEquipped with safety devices such as emergency switchComputer controlledSize of lower body section: 1130×600mmSize of upper body section: 590×600mmStanding angle: 0 °–90°Angle between lower body section and upper body section: 0°-90°Height of Bed Adjustment: 410-750mm (Adjustable)External Dimension: 2115×725×600mmCan automatically adjust the height of bed surface to facilitate movement of patients.The angle of pedal can be electrically adjusted to take corrective training for ankle joint of patients.Equipped with safety devices such as emergency switch.Rising and falling of bed surface are controlled by full-automatic computer program or inching switch

Backed by rich expertise in this domain, we have been capable of manufacturing, exporting and supplying of a quality assured range ofx ray machine tilting table. Our offered table is widely used for holding the x ray machine. This table is precisely manufactured by our dexterous professionals using the finest quality raw material and innovative technology in compliance with international standards. Owing to its compact design, this table is highly demanded in medical centers. Moreover, our valuable clients can avail this table from us at rock bottom prices.

TILT TABLE MANUAL : Tilt angles 0 to 90 degree, the patient firmly holds to three straps provided. The Tabletop is 61cm x 195cm long x 80cm high, and on heavy-duty 35mm steel tube legs with 10cms. Dia wheels. Two griping handles for various activities.

Features : Special design for angle setting on various machine tools. Low profile for larger working space. The table is set manually to the required Tilt and is locked in the set position by means of two locking clamps held through bolts. Can be adjusted by 45 degree on both right-hand and left- hand side. The angle marking are accurate and easy to read. Application : Useful accessory for setting work at an angle for milling or other operations. Construction : Cast Iron Stress Relieved Tilting Table. Finish : Hammer tone mid grey.

Product description: hi low tilt table with remote control,adjustable activity tray,adjustable foot rest,tilt angle indicator,3 support belts,large locking castor . Height adjustable to wheel chair height. Additional information: pay mode terms: lc (letter of credit),other send business enquiry

special design for angle setting on various machine tools.* low profile for larger working space.* the table is set manually to the required tilt and is locked in the set position by means of two locking clamps held through bolts.* can be adjusted by 45 degree on both right-hand and left-hand side.* the angle marking are accurate and easy to read. .

  Tilting table with payload of up to 25t. Specific for MINIDREL S and B series. Optional installation of pushers.